The process of converting a digital file into a physical object has been around since the late 1980s, but only in the last few years has 3D printing caught on as a modeling tool in the design and construction industry. AEC firms have expressed high hopes for integrating 3D printing with BIM, laser scanning, and augmented reality—even for manufacturing building components.
“3D printers have completely reinforced our modeling process,” says James Brogan, AIA, Director of Firmware Technology at Kohn Pedersen Fox Associates, whose New York and London offices print up to 250 models a month.
What AEC pioneers of 3D printing recommend:
1. Test the printer’s production speed.
2. Sniff for smells, listen for noise.
3. Check the printer’s reliability and model resolution.
4. Remember, you get what you pay for.
5. Make sure you’ve got the right software.
6. Lease before buying.
7. Outsourcing may be a convenient option.
8. Establish protocols for use of your firm’s 3D printers.
9. Don’t let nitpicking controls stifle creativity.
10. Make sure 3D printing is the right solution for the client and fits your business.
11. Look beyond building models into wider uses of 3D printing.
Early adopters will also tell you that 3D printing hasn’t always lived up to expectations. Brogan says KPF’s earliest 3D machines took forever to make models, only to have the models fall apart.
Building Design+Construction reached out to 3D printing users at AEC firms and industry experts for advice on how to make the technology more productive and useful. Here’s what they told us.
1. Test the printer’s production speed.
KPF’s experience with a slow printer was not unique. VOA Associates’ Chicago studio has been using a $6,500 3D printer that’s “really slow, and can sometimes take days to build a model,” says Susan Heinking, AIA, NCARB, LEED AP O+M, until recently the studio’s Sustainability Leader. (She’s now with Pepper Construction.)
TIP:3D printing technology keeps getting better, and newer, faster machines are coming. But you’ll want to test your model first to see if it’s up to speed for your needs.
2. Sniff for smells, listen for noise.
Some 3D printers can be truly obnoxious. They require the use of fixatives, resins, and post-processing sprays that can stink up your whole office. Heinking, a BD+C 40 Under 40 honoree, says VOA’s printer can be noisy.
TIP: “We made the mistake of not isolating the printer from the rest of the office,” says Heinking. Don’t make the same mistake. You don’t want printer noise or smells disturbing staff, visitors, or—perish the thought—clients.
3. Check the printer’s reliability and model resolution.
Gensler’s Washington, D.C., office bought its first 3D printer for $37,000 a few years back. “There was a lot of excitement,” says Robert Blalolil, a Designer in the model shop. That anticipation quickly dissipated. “It was on the fritz half the time, and the model resolution was not the greatest,” he recalls. Gensler’s D.C. office has since upgraded to a $90,000 object polyjet printer and now prints up to 30 models a month.
TIP: Ask the vendor for documentation on model resolution. As for reliability, that’s tougher to verify. The vendor should provide referrals of recent customers who have purchased the model you’re looking at—so you can make the call.
4. Remember, you get what you pay for.
An entry-level desktop 3D printer that uses a process called filament deposition manufacturing can cost as little as $750. More versatile machines for commercial use can have six-figure price tags. But divining the relationship between cost and value is not always as straightforward as you’d think.
LGM3D (www.lgm3d.com), an architectural model shop in Minturn, Colo., bought its first printer on eBay, for $2,000. It never worked. “It was the largest paperweight we ever purchased,” says Patrick Fleege, Senior Project Manager, still managing to have a chuckle in his voice. LGM3D bought its first powder-based inkjet printer in 2000, and has continued to upgrade its equipment. It now operates eight machines.
At the other end of the scale, you can pay $80,000 for a lemon, as ZGF Architects did for its first 3D printer. Price alone is no guarantee of quality.
TIP: Do your due diligence to find a reliable vendor with workhorse models. MakerBot’s fifth-generation Replicator Desktop 3D printer retails for $2,899. There are dependable desktop 3D models that range in price from $3,000 to $30,000, according to Robert Petty, an Associate Partner who runs ZGF Architects’ model shop. He’s happy with the firm’s new $80,000 powderized machine that prints in full color. You’ve got to spend the time and shop around to find the printer with the right price point and value proposition for your needs.
To design the La Rinconada baseball stadium in Caracas, Venezuela, known as Parque Hugo Chavez, Gensler’s team in its Washington, D.C., office used 3D goggles to share how the sight lines would look from every point in the 35,000-seat ballpark. That research informed the 3D models that Gensler printed to develop the different seating levels of the stadium, whose construction is scheduled for completion in 2016. Photo: Gensler
5. Make sure you’ve got the right software.
Three-dimensional printing is not just a matter of machinery. You’ve got to have software brains that work with the printer’s guts. “Whatever you can dream up on the computer, you can build as a model,” says Greg Sherlock, who runs Populous’s model shop. But Populous also had to come up with software that could translate the data its designers were providing into language that the printer understood and that wouldn’t cause printing glitches.
TIP: Follow Populous’s lead: Look at a minimum of four or five different software packages, and test them on several different printer models before making your final choice.
6. Lease before buying.
AEC firms just getting into 3D printing would be wise to start out by leasing equipment from a trusted third-party provider. There are dozens of printer suppliers out there.
For nearly a year, Populous has been able to up its 3D modeling game by leasing a top-of- the-line Epson ProJet 3500 CPXMax printer on a monthly fee basis. KPF has aligned with a graphics company that supplies and maintains its printers; the vendor also recommends upgrades as needed. Leasing, says Brogan, was “really important to us early on” as a way to control costs. KPF pays by the number of models it prints.
TIP: Just as you would in leasing a car, read the fine print on the lease agreement. Better yet, have your lawyer red-flag it.
7. Outsourcing may be a convenient option.
If you prefer not to buy or lease a 3D printer, or if you have a project that requires more sophisticated, larger, or more complicated model-making than your 3D printer can handle, you can outsource the work to any of a host of 3D printing services, such as Shapeways (www.shapeways.com) and Ponoko (www.ponoko.com).
LGM3D recently shipped $2,000 worth of building models to HOK’s office in Atlanta, even though HOK has its own in-house model and printing capability. “We’re selling capacity,” says Charles Overy, LGM3D’s Director/CEO, “and we don’t see professional model making becoming extinct.”
TIP: Do the math. The cost-effectiveness of outsourcing will depend largely on how many models you’d be printing over time. Just make sure to set up internal approval procedures so that you don’t go overboard and get surprised by a nasty bill.
8. Establish protocols for use of your firm’s 3D printers.
Recent architecture graduates are usually quite familiar and comfortable with 3D printing. Don’t be surprised when you hire them that they want to take full advantage of your firm’s gadgets, sometimes to an extreme. “Our younger staffers use 3D printing like a Xerox machine,” says Nick Leahy, AIA, LEED AP, a Principal in Perkins Eastman’s New York office.
TIP: Set up firmwide procedures for determining who gets to print what, and when. At Kohn Pedersen Fox, a project manager must approve any printing job. At VOA, the request has to go to the IT department. Your firm needs to establish similar internal mechanisms to prevent excessive or frivolous printing.
9. Don’t let nitpicking constraints stifle creativity.
On the other hand, you don’t want to be so tight on the use of the 3D printer that you stifle innovation that could come from it. “The magic happens when a designer doesn’t think twice about creating a physical artifact, and then goes back to the digital world to make adjustments,” says Paul Audsley, Associate AIA, Principal, and Director of Digital Practice for NBBJ.
The technology can open up new possibilities. ZGF’s three 3D printers have become great tools for modeling cantilevered work. “They allow us to explore geometries in ways we weren’t able to do before,” says Petty.
TIP: You have to decide if your 3D printer is there just to churn out models on the fast and cheap, or if there should be some room for experimentation and creativity that’s not tied directly to a client invoice. How about setting aside 10–15% of the 3D printing budget (or production time) for wild and crazy ideas? Just keep an eye peeled for abuse.
10. Make sure 3D printing is the right solution for the client and fits your business.
Clients may ask for 3D-printed models, but sometimes all they really want are traditional handmade models. LGM3D’s Overy says the hype has helped his business, “but 3D printing is not always the best way to do things.”
Nor is the technology a good fit at this time for all sectors of the construction industry. “We do more manufacturing and heavy-industry engineering, and are dealing with complicated plans, so 3D printing is still a ways away for us,” says Mike Gwyn, President of Leidos Constructors and SVP of Leidos Engineering.
TIP: Don’t try to push 3D printing where it’s not wanted. Treat the technology as if it were an ungainly teenager. Give it a chance to grow up at its own pace.
11. Look beyond building models into wider uses of 3D printing.
“We’re creating stuff that’s beyond our core capacity,” says LGM3D’s Fleege. The 3D-printing model maker switched to ZCorp’s 510 and 650 Zprinter systems after it started working with SketchUp 3D modeling software.
One forward-looking possibility is the use of 3D printing to manufacture building components. Populous’s Sherlock says he foresees the day when 3D scanners will capture a 360-degree image, move the image into CAD, and then translate the data parametrically to shape the geometry into a 3D object. This could be the first step toward using 3D printing for manufacturing building components, he says.
Gensler’s Los Angeles office is in the second year of a research project to facilitate the printing of larger objects. Tam Tan, an Associate there, says that the research team has already attached a printer to a drone, thereby extending the printer’s X and Y coordinates and making them virtually “boundless,” according to Tan. Thus far, the Gensler team has succeeded in using a printer in flight to print concrete forms onto a sheet of plywood, so the project has a long way to go before any practical application arises from it.
TIP: Start dreaming, and ask yourself: How far can I take this exciting technology?
Related Stories
| Feb 16, 2012
Gain greater agility and profitability with ArchiCAD BIM software
White paper was written with the sole purpose of providing accurate, reliable information about critical issues related to BIM and what ArchiCAD with advanced technology such as the GRAPHISOFT BIM Server provide as an answer to address these issues.
| Feb 1, 2012
‘Augmented reality’ comes to the job site
A new software tool derived from virtual reality is helping Building Teams use the power of BIM models more effectively.
| Jan 3, 2012
BIM: not just for new buildings
Ohio State University Medical Center is converting 55 Medical Center buildings from AutoCAD to BIM to improve quality and speed of decision making related to facility use, renovations, maintenance, and more.
| Dec 29, 2011
GreenWizard offers cloud-based LEED credit management, assessment
The company recently began offering companies the ability to run assessments for design credits, in addition to traditional product-specific LEED credits.
| Dec 27, 2011
Clayco awarded expansion of Washington University Data Center in St. Louis
Once completed, the new building addition will double the size of the data center which houses sophisticated computer networks that store massive amounts of genomic data used to identify the genetic origins of cancer and other diseases.
| Dec 27, 2011
State of the data center 2011
Advances in technology, an increased reliance on the Internet and social media as well as an increased focus on energy management initiatives have had a significant impact on the data center world.
| Dec 14, 2011
Belfer Research Building tops out in New York
Hundreds of construction trades people celebrate reaching the top of concrete structure for facility that will accelerate treatments and cures at world-renowned institution.
| Dec 10, 2011
10 Great Solutions
The editors of Building Design+Construction present 10 “Great Solutions” that highlight innovative technology and products that can be used to address some of the many problems Building Teams face in their day-to-day work. Readers are encouraged to submit entries for Great Solutions; if we use yours, you’ll receive a $25 gift certificate. Look for more Great Solutions in 2012 at: www.bdcnetwork.com/greatsolutions/2012.
