For the rehabilitation of two of its senior housing properties dating to the 1960s and 1970s, the Morristown (N.J.) Housing Authority installed 608 single-, double-, and triple-unit windows supplied by national manufacturer Crystal Window & Door Systems.
The renovation work included extensive interior and exterior work, complete resurfacing of the brick façades, and the replacement of all windows in the pair of six-story buildings: the Wetmore, 31 Early Street, and the Petrone, 39 Early Street.
The two properties offer 200 apartments set aside exclusively for area seniors. Financing for the rehabilitation project was provided through a special public/private arrangement under the federal and New Jersey state Rental Assistance Demonstration program, which also includes privatization of the buildings’ ongoing operation and management.
MORE THAN 600 REPLACEMENT WINDOWS INSTALLED
Crystal supplied 459 Series 2000A aluminum double-hung windows in single- and master-frame double versions and 149 Series 2100 aluminum fixed windows in single- and master-frame triple units. The Series 2000A is a thermally broken aluminum tilt-in sash double-hung window. The 3¼-inch frame depth window features equal sightlines, a sloped sill, and a solid AAMA structural rating of CW-PG50.
Other features include an ergonomic curved, easy-use sash lift rail and anti-drift head clip lock, which automatically locks the top sash in the closed position, assuring safety, security, and a weathertight seal.
The Crystal 2000A is available as a single unit and, with a continuous master frame, double and triple units, some of which were used for the Morristown project.
For the Morristown project, Crystal also supplied the Series 2100 thermally broken aluminum fixed picture window. This 3¼-inch frame depth window is AAMA rated CW-PG60. The Series 2100 is also available as a single unit or as double and triple units using a continuous master frame.
To complement the building’s new modern façade, all the windows were finished in durable, environmentally sustainable AAMA 2604 simulated anodized silver powder coat paint.
In addition to the Series 2000A and 2100 windows, Crystal sourced, supplied, and factory installed in window frames 248 insulated panels in lieu of window glass. With each of the Series 2100 triple window units for the Petrone building, the center panel was left open to accept an HVAC unit and the two flankers were glazed with a ⅞-inch thermal insulated panel.
The Petrone building’s Series 2000A double-hung windows were mulled atop Series 2100 fixed windows glazed with a ⅞” thick insulated panel. The special insulated panels were supplied by A-Porcel, Bronx, N.Y., and featured a stucco exterior finish in AAMA 2604 simulated anodized silver powder coat paint to match the window frames.
For all the vision glass window units, ⅞-inch double-pane insulated glass units with Intercept warm-edge spacers were installed. For additional thermal efficiency and safety, Vitro Solarban SB60 tempered glass with argon gas was specified.
Crystal fabricated and provided installation accessories including window frame face flanges, stack mullions, and installation clips with snap trim.
WETMORE/PETRONE BUILDING TEAM
Owner: Morristown (N.J.) Housing Authority
Developer/Privatized property manager: Orbach Affordable Housing Solutions
Architect: KMA Design Studio
General contractor/Window installer: ETC Companies
ABOUT CRYSTAL WINDOW & DOOR SYSTEMS
Crystal Window & Door Systems is one of the top 30 manufacturers in North America of replacement and new construction vinyl and aluminum window and door products and high-end fenestration systems. Crystal offers a full product line, rapid order-to-delivery times, quality workmanship, innovative product features, outstanding value, and an experienced and knowledgeable staff. Headquartered in New York, the company operates a national network of factories, branches, subsidiaries and affiliates in California, Illinois, Missouri, Ohio, Pennsylvania, and its newest branch in Texas. For further information, call 718-961-7300.
Related Stories
Codes and Standards | Jul 17, 2018
NIMBYism, generational divide threaten plan for net-zero village in St. Paul, Minn.
The ambitious redevelopment proposal for a former Ford automotive plant creates tension.
Codes and Standards | Jul 17, 2018
In many markets, green features are more of a requirement for apartment renters
Renters in many U.S. cities have come to expect green features in apartments that they rent, with an eye toward energy efficiency and healthy indoor air.
Multifamily Housing | Jul 13, 2018
Student housing vs. multifamily housing—what are the differences?
While student and multi-family housing share a common building form, it’s the student resident that drives the innovation of new spaces.
Multifamily Housing | Jul 11, 2018
Meet the ‘CoHaus’: N.Y. developer unveils large-scale flats concept for boomers, Gen Xers
With its new CoHaus development, Ward Capital Management is betting on baby boomers downsizing and Gen Xers upsizing.
Sponsored | Multifamily Housing | Jul 10, 2018
Renovated mixed-use development features more desirable rentals
Multifamily Housing | Jul 2, 2018
17-unit condominium will rise one block south of Sunset Boulevard in West Hollywood
SPF:architects is designing the building.
Multifamily Housing | Jun 27, 2018
To take on climate change, go passive
If you haven’t looked seriously at “passive house” design and construction, you should.
Market Data | Jun 19, 2018
America’s housing market still falls short of providing affordable shelter to many
The latest report from the Joint Center for Housing Studies laments the paucity of subsidies to relieve cost burdens of ownership and renting.
Multifamily Housing | Jun 13, 2018
Multifamily visionaries: KTGY’s extraordinary expectations
KTGY Architecture + Planning keeps pushing the boundaries of multifamily housing design in the U.S., Asia, and the Middle East.
| May 30, 2018
Accelerate Live! talk: An AEC giant’s roadmap for integrating design, manufacturing, and construction
In this 15-minute talk at BD+C’s Accelerate Live! conference (May 10, 2018, Chicago), Skender CEO Mark Skender and Chief Design Officer Tim Swanson present the construction giant’s vision for creating a manufacturing-minded, vertically-integrated design-manufacturing-build business model.
