flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Energy Department analysis shows efficiency gains from ASHRAE 2013 energy standard

Energy Department analysis shows efficiency gains from ASHRAE 2013 energy standard

The positive results may lead to new standard for state commercial building energy codes


By BD+C Staff | May 22, 2014
UT Dallas 74,000-sf Student Services Building, the first academic structure in T
UT Dallas 74,000-sf Student Services Building, the first academic structure in Texas to be rated a LEED Platinum facility by the

Preliminary analysis from the U.S. Department of Energy (DOE) shows that the ASHRAE/IES’s 2013 energy efficiency standard contains energy savings over the 2010 standard of 8.5% source energy and 7.6% site energy.

As a result, DOE could establish the 2013 standard as the commercial building reference standard for state building energy codes. Today, states must meet or exceed the 2010 ASHRAE standard—the commercial building reference standard for state building energy codes under the federal Energy Conservation and Production Act.

DOE says the energy savings reflect improvements in ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings, which includes provisions related to better lighting, fans, commercial refrigeration, boilers, and controls. DOE is now accepting comments on this preliminary determination.

The 2013 standard contains 52 positive impacts on energy efficiency including:

•    Control requirements for lighting alternations
•    New requirements for individual fans
•    Reduction of energy usage for large boilers
•    Reduction of fan energy usage
•    New efficiency requirements for commercial refrigeration
•    More controls in more spaces and reduction of time to reduction or shut off of those controls
•    Reduction of lighting power density in most building types

More information can be found at http://www.energycodes.gov/regulations/determinations.

(https://www.ashrae.org/news/2014/doe-takes-first-step-in-updating-national-reference-standard-for-commercial-buildings-to-90-1-2013)

Related Stories

| Sep 8, 2011

Pilot ISO 50001 Implementations Report Big Energy Savings

The International Organization for Standardization (ISO) recently published ISO 50001 to provide a recognized framework for integrating energy performance into management practices. 

| Sep 8, 2011

USGBC Revises Energy Demand Response Credit

Originally launched in 2010, the revised and enhanced Demand Response Pilot Credit establishes guidelines that are anticipated to increase participation in automated energy demand response programs.  

| Sep 8, 2011

Water Safety in Buildings Guide Published by World Health Organization (WHO)

This WHO book provides guidance for managing water supplies in buildings where people may drink water, use water for food preparation, wash, shower, swim or use water for other recreational activities or be exposed to aerosols produced by water-using devices, such as cooling towers. 

| Sep 7, 2011

NFPA Fire & Life Safety Conference in December

Presentations on recent Fire Protection Research Foundation projects, how September 11th and the Triangle Shirtwaist Factory fire affected high rise design, and a panel discussion on emerging code issues will be featured at the National Fire Protection Association (NFPA)’s Fire & Life Safety Conference on December 12-14 in Orlando, FL.The meeting will include more than 60 educational sessions in which participants can earn continuing education units (CEUs). Presentations will be led by NFPA staff experts and technical committee members, and will be organized in four tracks – building and life safety, detection and alarm, fire suppression, and codes and standards. For more information, visit www.nfpa.org/FLSCONF.  

| Sep 1, 2011

Project Aims to Automate Code Compliance Assessment

FIATECH, a consortium of owners from the industrial, power, and retail markets that build large structures, launched a project this year to validate the use of automation technology for code compliance assessment, and to accelerate the regulatory approval process using building models. Long-term objectives include the development of an extensive, open-source rule set library that is approved by industry and regulatory bodies for use by technology developers and code officials.

| Sep 1, 2011

EPA Says Additional Lead Paint Cleaning Rules Not Necessary

The EPA has concluded that current Lead: Renovation, Repair, and Painting Program (LRRP) cleaning requirements and lead-safe work regulations are sufficient to protect the public from lead dust hazards. “Our members have been instrumental in contacting legislators to detail the detrimental impact of the current LRRP," says Richard Walker, American Architectural Manufacturers Association’s president and CEO. “This collective industry voice has prompted the EPA to make the responsible decision to refrain from adding further, unnecessary costs to homeowners under the current economic climate."http://www.aamanet.org/news/1/10/0/all/603/aama-commends-its-members-congress-for-vacating-lrrp-clearance-rule

| Aug 11, 2010

Best AEC Firms of 2011/12

Later this year, we will launch Best AEC Firms 2012. We’re looking for firms that create truly positive workplaces for their AEC professionals and support staff. Keep an eye on this page for entry information. +

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021