flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Greening Hillsides For Safety

Greening Hillsides For Safety

Heavy construction equipment and aircraft mobilize to place hydro-mulch in wildfire-ravaged areas of California.


By By Mike Crummy Edited by Loren Faulkner | August 11, 2010

It is California's wildfires season again, with the potential of destroying thousands of acres, even threatening to overtake cities and forcing evacuations.

If there is any positive to this type of natural disaster, it is that communities and even companies come together for the common good. An erosion control project in the aftermath of southern California wildfires took place near Corona, late last year that showed that. It was an environmental necessity.

Fires burned more than 28,000 acres of the Santiago Canyon, including 6,700 acres of Cleveland National Forest. Of that, the U.S. Forest Service calculated 1,241 acres of forestland had been severely damaged by high intensity fire. With slopes at less than 50-percent, this acreage needed to be stabilized from mudslides, soil erosion, and flooding with hydro-mulch – a mixture of wood, paper, and guar gum – until the natural process of re-vegetation could eventually take over.

The contract for restoration of the Santiago Fire area was awarded to Aero Tech, Inc. a New Mexico-based contractor specializing in aviation services, including aerial hydro-mulching. The company partnered with Western States Reclamation, Inc., an environmental contracting corporation with headquarters in Frederick, Colo.

“We first teamed up with Aero Tech back in 2000,” said Colby Reid, reclamation division manager for Western States. Taking the large magnitude of Santiago Fire job into account, Aero Tech and Western States brought in two additional companies to round out what has become sort of a four-member fire reclamation posse over the years. Wildlands, Inc., an environmental restoration company based in Richland, WA, and Erickson Air-Crane Incorporated out of Central Point, OR, joined the team, and the race was on to restore the affected areas of the Santiago Canyon.

“The biggest challenge for any project is mobilization,” said Reid. “After a bid is accepted you have to move quickly to find locations for planes and equipment, and to secure a water supply and materials.”

The timing of the job made acquiring materials more of a logistical challenge than usual. “When you have a job of this size, you need so much material that you're basically draining the resources of the mulch industry,” said Adam McCullugh, project manager and estimator for Wildlands. “On top of that, this project came about during the local fall seeding window, so distributors are already supplying contractors who are doing work that's been planned out ahead of time. So we're drawing resources from wherever we can get them. Some of the mulch even has to come from clear across the country.”

With approximately 40 workers and two staging areas with ample supplies and equipment in place – Western States and Aero Tech set up at Corona Municipal Airport, with Wildlands and Erickson at a heli-base near Irvine Lake – the reclamation project officially began on December 17, 2007.

Aero Tech flew six Air Tractor AT-802 fixed-wing airplanes out of the airport operation, while Western States mixed hydro-mulch and loaded the planes using seven HydroSeeders from Finn Corporation, including two of the manufacturer's new Titan 400 units. “We got the Titan HydroSeeders right before the job started,” said Reid. “We also had four Finn T-330's and one T-400 on this project.”

Finn's T-400 and T-330 are each powered by a 115-horsepower engine. The new Titan 400 features a 170-horsepower engine. “I was very interested in the increased productivity of the larger motor and the larger pump,” said Reid. “It's a big help in getting material out faster. The larger volume is a big plus as well. Sometimes our sites are remote and a long way from water. Every extra bit of water and material you can haul saves time and cuts down on trips to and from the base.”

Western States used its HydroSeeders to produce a hydromulch mix of 60-percent wood and 40-percent paper with guar gum tackifier, a standard material combination for Forest Service projects. While the material itself wasn't anything out of the norm, the fast pace at which it had to be produced was significant. Western States had to run its machines nonstop with high volumes to keep getting planes reloaded as they returned.

“Each plane holds 800 gallons of material,” said Reid. “We pump directly out of the Finn equipment into the airplane. From the moment we're hooked up to the aircraft, it takes about 40 to 60 seconds to load it up. It's a very high-tempo operation, so the machines have to produce high volumes of material quickly.”

At the Irvine Lake site, Erickson flew an S-64 Aircrane Helitanker equipped with a 2,650-gallon firefighting tank. Wildlands ran two Finn HydroSeeders of their own – a T-330 and a Titan 400, which Wildlands had received two months earlier for a job in Los Angeles. Mulch was delivered from the Finn machines into a storage tank. A large 8-inch pump was then used to load from the tank to the helicopter.

“The helicopter was averaging anywhere from 10 to 15 minutes for turnaround time between reloads,” said McCullugh. “Once it landed and we were hooked up, we were loading 2,200 to 2,500 gallons of material into the helicopter in as little as 40 seconds.”

Keeping the storage tank full of enough material to fully load the helicopter required the Finn HydroSeeders to run continuously.

Unfavorable weather conditions made speed and efficiency even more critical to the project's success. The contractors had to wait out heavy rains, fog and high winds on several occasions, so taking advantage of breaks in the weather pattern was an absolute must. “That's the tricky thing about our industry,” said Reid. “Fire season comes right before the rainy season, so you're always trying to get ahead of the weather. The faster you can get material out of the tanks and onto the ground, the better.”

“We had guys working from daylight to dark every day of the week, nonstop right through the holidays,” said McCullugh. “It can be pretty brutal work at times.”

By the time the project was completed on January 21, 2008, the six Aero Tech planes and Erickson Helitanker had combined to put in well more than 1,000 hours of flight time. In that time, the aircraft delivered 4.5 million gallons (or 1,200 tons) of hydromulch to the 1,241 affected acres of the Santiago Fire, a rate of more than 3,600 gallons per acre. Ground verification by Western States and Wildlands confirmed that the hydromulch was holding after rains fell on the newly restored portions of the forest, essentially making the project's success official. n

boombox1
boombox2
native1
halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021

Â