The Appropriations Committee of the U.S. House of Representative voted to cut about $3 billion from the military construction budget for FY 2015 when compared to FY 2014 funding levels.
The Army would see the sharpest cuts on a percentage basis, with a $578 million, or 52% reduction in FY 2015. However, a provision in the bill provides the Army, Army National Guard, and Army Reserve Accounts an additional $245 million for use and disbursement at the discretion of the Secretary of the Army.
The Naval Facilities Engineering Command (NAVFAC) program, encompassed in the Navy and Marine account, would see a $631 million, or 39%, cut in FY 2015.
The Veteran’s Administration, also impacted by this budget proposal, would be funded at the same level as in FY 2014 ($1.057 billion). The funds for FY 2015 would be evenly split between the two primary VA construction accounts.
The VA’s Major Construction Account—for projects over $10 million—would increase from $342 million in FY 2014 to $561 million in FY 2015. The Minor Construction Account—for projects below $10 million—would decrease from $714 million to $495 million.
The House bill figures are identical to the president’s FY 2015 budget request.
(http://news.agc.org/2014/04/25/house-panel-approves-fy-2015-milconva-funding/)
Related Stories
| Feb 12, 2013
ASHRAE publishes protocols for performance measurement
ASHRAE has published “Performance Measurement Procedures for Commercial Buildings: Best Practices Guide,” a how-to guide for continuously evaluating and improving the performance of commercial buildings throughout their service life.
| Feb 12, 2013
California resolves ADA inconsistencies with 2013 building code
The recently adopted 2013 California Building Code (CBC) revisions bring the state code in line with the federal Americans With Disabilities Act 2010.
| Feb 12, 2013
Bullitt Foundation says Living Building Challenge can only be met after code change
The 50,000 sf Bullitt Center in Seattle is being constructed to be the greenest, most energy-efficient commercial building in the world, and meet the ambitious goals of the Living Building Challenge.
| Feb 12, 2013
Tilt-Up Concrete Assn. offers technical advice on 2012 International Energy Code
The Tilt-Up Concrete Association (TCA) says it can be a major industry resource in helping designers adhere to the International Energy Conservation Code (IECC).
| Feb 8, 2013
WDMA releases national policy agenda for windows, doors, skylights
Document urges a regulatory stance that will support manufacturing, including favorable building codes and tax policy.
| Feb 6, 2013
Green-roofing bills approved by New Jersey's state Assembly
Two bills that would require installation of green and blue roofs on new government buildings received overwhelming approval from the state Assembly in New Jersey.
| Feb 6, 2013
BOMA favors voluntary energy benchmarking and disclosure, opposes mandates
The Building Owners and Managers Association (BOMA) International announced support for voluntary energy benchmarking, but said it opposes mandates for benchmarking, disclosure, and labeling that many states and municipalities are implementing.
| Feb 6, 2013
Lumber Standard Committee approves new Southern Pine design value changes
The American Lumber Standard Committee Board of Review has approved the Southern Pine Inspection Bureau’s design value changes for all sizes and grades of visually graded Southern Pine dimension lumber.
| Feb 6, 2013
CEIR seeks public input on draft of PV racking and attachment document
The Center for Environmental Innovation in Roofing (CEIR) has released the first public draft of PV Racking and Attachment Criteria for Effective Low Slope Metal Panel Roof System Integrationfor an initial round of public comment.
| Feb 6, 2013
Insurance Institute demonstration shows advantages of following wind resistance standards
A demonstration by the Insurance Institute for Business and Home Safety shows how powerful winds affect concrete-and-steel buildings built with different techniques.
