The latest version of The Manual on Uniform Traffic Control Devices (MUTCD) is drawing heavy criticism for failing to consider non-automotive road users.
MUTCD is an 862-page engineering manual that governs road markings and signs across the U.S. It carries the power of federal regulation and can shield engineers from liability when someone is hurt or killed.
First published in 1935, the manual has been updated and expanded about once per decade. More than a dozen advocacy groups, including the National Association of City Transportation Officials (NACTO), the League of American Bicyclists, the National League of Cities, the National Safety Council, and America Walks have asked federal transportation leaders to scrap the current draft and start over.
The major complaint: the manual subordinates pedestrian and cycling safety to vehicle throughput, even as U.S. pedestrian and cycling deaths have been mounting. Critics also say the manual is often used to shut down neighborhood-level campaigns for a new crosswalk or bike lane; essentially lets speeding drivers determine the speed limit; and slows the rollout of bus-only lanes.
Related Stories
| May 3, 2012
Green-roof requirement now includes industrial facilities in Toronto
A mandate that requires installation of green roofs on new commercial and residential buildings in Toronto has been expanded to include industrial facilities.
| May 3, 2012
Innovative wastewater treatment helps achieve LEED rating
LEED for New Construction, Neighborhood Development and the LEED Volume Program offer some ways to achieve LEED points when dealing with wastewater treatment.
| Apr 26, 2012
Lack of bolts on steel support caused collapse at Cincinnati casino
Too few bolts connecting horizontal steel support beams with vertical steel columns was the cause of January’s construction accident at Horseshoe Casino Cincinnati, according to the report of the Occupational Safety and Health Administration.
| Apr 26, 2012
OSHA criticized for taking too long to roll out safety rules
The Occupational Safety and Health Administration takes far too long to adopt new safety regulations compared to other agencies’ development of rules, safety experts said during a Senate hearing.
| Apr 26, 2012
Contractors fear that GSA scandal will lead to fewer federal construction contracts
In the wake of the recent scandal at the General Services Administration in which workers spent lavishly at a Las Vegas conference, a spokesman for Associated General Contractors of America said contractors are worried the scandal will result in cuts to GSA's construction and renovation budgets.
| Apr 26, 2012
Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales
Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.
| Apr 26, 2012
New York City Council moves to license elevator mechanics
New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.
| Apr 23, 2012
AAMA releases updated specification for anodized aluminum
AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.
