flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New ISO standard on video fire detectors will help identify fires more quickly

Codes and Standards

New ISO standard on video fire detectors will help identify fires more quickly

The standard marks the first comprehensive international specification for this equipment.


By Peter Fabris, Contributing Editor | July 26, 2017
Firefighters on the roof of a burning building in Alaska

Pixabay Public Domain

Newly released standard ISO/TS 7240-29 provides the first platform for international acceptance of a uniform specification for video fire detectors.

Video detection technology detects, identifies, and analyzes smoke at the first sign of fire or flame. The equipment’s understanding of the behavior and movement of smoke enables users located on site or from a remote location to raise the alert and take appropriate action early.

“In large open compartments, it can remove the delay in smoke travelling to the detector and result in a quicker response by emergency services,” says Keith Shinn, Chair of ISO subcommittee ISO/TC 21/SC 3. “It can also permit smoke detection in harsh environments where it may otherwise be impractical.”

“Considering that many of the facilities where VFDs are to be installed are owned by international conglomerates, an internationally accepted specification is ideal,”

says Isaac Papier, Convenor of ISO subcommittee ISO/TC 21/SC 3. “The new ISO/TS 7240-29 provides owners and insurance carriers with the international consensus metrics for performance of VFDs.”

Related Stories

| Mar 19, 2014

Santa Monica, Calif., may offer LEED alternatives to help promote green construction

With developers in Santa Monica, Calif., looking for ways to build green more inexpensively, the city may consider alternatives to LEED such as Green Globes.

| Mar 18, 2014

Canadian wood industry pushes for ‘wood first’ legislation on mid-rise public projects

The wood lobby is pushing Canadian provinces to pass “wood first” legislation specifying wood framed structures as the default for mid-rise public works projects where warranted.

| Mar 13, 2014

USGBC hits back at Environmental Policy Alliance criticism

The Washington, D.C.-based Environmental Policy Alliance has launched a campaign to make the claim that LEED-certified buildings are less energy efficient than other buildings. In response, USGBC told its members: "Don’t be fooled, the Environmental Policy Alliance isn’t the 'EPA' you might think."

| Mar 13, 2014

North Carolina board recommends switch to six-year code update cycle

In a nine to six vote, the North Carolina State Building Code Council on March 11 approved moving the commercial building code (except for the electrical code) to a six-year cycle for updating instead of a three-year cycle.

| Mar 13, 2014

OSHA’s funding disclosure requirement for those offering silica rule comments draws ire

The Occupational Safety and Health Administration is requiring those who submit comments on the silica rule to disclose their funding sources for their scientific research to avoid conflict of interest.

| Mar 13, 2014

EPA publishes ‘best management practices’ rule on erosion, stormwater at construction sites

The Environmental Protection Agency published a new rule this month that will require the construction, housing, and utility sectors to carry out "best management practices" in order to prevent erosion and harmful stormwater discharges at construction sites.

| Mar 5, 2014

San Francisco board seeks remedies to code enforcement complaints

Two supervisors charged that a lack of adequate code enforcement has led to blight from dilapidated or unfinished buildings. 

| Mar 5, 2014

Obama proposes $1 billion for climate change risk mitigation

President Barack Obama would spend $1 billion to “better understand the projected impacts of climate change,” encourage local action to reduce future risk, and fund technology and infrastructure that will be more resilient to climate change.

| Mar 5, 2014

Southern Forest Products Assn. revamps pressure-treated pine specifications

It provides information to assist with the proper specification and use of pressure-treated Southern Pine materials. 

| Mar 5, 2014

UL, PRI Construction Materials Technologies reach product certification agreement

Underwriters Laboratories (UL) Inc. reached an agreement with PRI Construction Materials Technologies LLC (PRI) through which PRI will participate in UL's "Data Acceptance Program," enabling the acceptance of data generated at PRI toward UL product certification.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021