flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

New ISO standard on video fire detectors will help identify fires more quickly

Codes and Standards

New ISO standard on video fire detectors will help identify fires more quickly

The standard marks the first comprehensive international specification for this equipment.


By Peter Fabris, Contributing Editor | July 26, 2017
Firefighters on the roof of a burning building in Alaska

Pixabay Public Domain

Newly released standard ISO/TS 7240-29 provides the first platform for international acceptance of a uniform specification for video fire detectors.

Video detection technology detects, identifies, and analyzes smoke at the first sign of fire or flame. The equipment’s understanding of the behavior and movement of smoke enables users located on site or from a remote location to raise the alert and take appropriate action early.

“In large open compartments, it can remove the delay in smoke travelling to the detector and result in a quicker response by emergency services,” says Keith Shinn, Chair of ISO subcommittee ISO/TC 21/SC 3. “It can also permit smoke detection in harsh environments where it may otherwise be impractical.”

“Considering that many of the facilities where VFDs are to be installed are owned by international conglomerates, an internationally accepted specification is ideal,”

says Isaac Papier, Convenor of ISO subcommittee ISO/TC 21/SC 3. “The new ISO/TS 7240-29 provides owners and insurance carriers with the international consensus metrics for performance of VFDs.”

Related Stories

| Oct 8, 2013

New Orleans advances $1 billion construction plan including new airport terminal

New Orleans plans to invest $1.1 billion in construction projects over the next five years.

| Oct 8, 2013

Report on large New York City buildings shows progress on energy efficiency

Buildings in New York City have been found to have a median score of 67 out of 100 in Energy Star's Portfolio Manager, an increase from 64 last year, and above the national average of 50, according to a study prepared by the Natural Resources Defense Council for the office of Mayor Michael Bloomberg.

| Oct 8, 2013

ConsensusDocs offers online prequalification management application to boost industry efficiency

In collaboration with ConsensusDocs, iSqFt has launched a new online platform designed to make the prequalification process for contractors and subcontractors seeking new work more efficient.

| Oct 8, 2013

Government shutdown closes E-Verify, could hamper construction hiring

E-Verify, the online federal program used to check the immigration status of prospective hires, has been closed due to the federal government shutdown.

| Oct 3, 2013

Florida contractors worry that regulations will hamper their ability to hire

Regulations such as the E-Verify rule and the Affordable Care Act could hinder contractors from hiring additional workers, according to some Florida contractors.

| Oct 3, 2013

Fall protection violations top OSHA citations list

Violations of fall-protection standards in fiscal 2013 are again the most frequent source of citations from the Occupational Safety and Health Administration, according to its top 10 list.

| Oct 3, 2013

Arizona utility pushes for change in building codes to boost efficiency on all commercial projects

Many large construction projects in Arizona are going green by paying attention to energy efficiency, but smaller buildings that are often rented out haven't yet jumped on the bandwagon.

| Oct 3, 2013

Bipartisan energy efficiency bill stalled; may not be revived this year

The Senate spent the first two weeks of September trying to pass bipartisan energy efficiency legislation, commonly known as Shaheen-Portman (S. 1392) that would have impacted building codes.

| Oct 3, 2013

LEED credential exams will feature LEED v4 material beginning next spring

The LEED Professional Credential exams for the LEED Green Associate and LEED AP with specialty designations will feature LEED v4 material beginning in late spring 2014.

| Sep 26, 2013

Ballot period on National CAD Standards open until Oct. 13

The Ballot Comment Period to update the nation’s leading computer-aided design (CAD) standard is now open.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021