The Metal Construction Association (MCA) has published a new design guide, "Retrofit Metal Roofing.”
The manual provides code-compliant and market-ready materials, methods, and best practices to re-roof buildings using metal roofing and light-gauge steel framing systems. Chapters are dedicated to market history, fundamentals, applications, framing systems, assembly details, metal roofing systems, and energy savings.
Detailed illustrations show where fully integrated solar hot air and water as well as power generation photovoltaic equipment are being incorporated into new metal roof systems. Retrofit metal framing systems, called “sloped build-up systems,” offer design professionals several options ranging from low-slope functional systems for discharge or diversion of roof rainwater, to steep-slope architectural applications.
“As metal roof systems are being increasingly used to replace or re-roof over the top of conventional roofing systems, it’s more important than ever for building owners, managers, design professionals, and contractors to understand how these systems work, and their advantages over other re-roofing methods,” said Mark James, chairman of MCA’s Retrofit Council.
Related Stories
| May 3, 2012
Green-roof requirement now includes industrial facilities in Toronto
A mandate that requires installation of green roofs on new commercial and residential buildings in Toronto has been expanded to include industrial facilities.
| May 3, 2012
Innovative wastewater treatment helps achieve LEED rating
LEED for New Construction, Neighborhood Development and the LEED Volume Program offer some ways to achieve LEED points when dealing with wastewater treatment.
| Apr 26, 2012
Lack of bolts on steel support caused collapse at Cincinnati casino
Too few bolts connecting horizontal steel support beams with vertical steel columns was the cause of January’s construction accident at Horseshoe Casino Cincinnati, according to the report of the Occupational Safety and Health Administration.
| Apr 26, 2012
OSHA criticized for taking too long to roll out safety rules
The Occupational Safety and Health Administration takes far too long to adopt new safety regulations compared to other agencies’ development of rules, safety experts said during a Senate hearing.
| Apr 26, 2012
Contractors fear that GSA scandal will lead to fewer federal construction contracts
In the wake of the recent scandal at the General Services Administration in which workers spent lavishly at a Las Vegas conference, a spokesman for Associated General Contractors of America said contractors are worried the scandal will result in cuts to GSA's construction and renovation budgets.
| Apr 26, 2012
Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales
Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.
| Apr 26, 2012
New York City Council moves to license elevator mechanics
New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.
| Apr 23, 2012
AAMA releases updated specification for anodized aluminum
AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.
