To run specialty gas lines for welding-lab classrooms in both a high school and technical college in Wyoming, Valley Plumbing and Heating worked closely with Viega to obtain the approvals necessary.
After consideration and research, Viega approved the uses requested, and the contractor was able to finish the job utilizing Viega ProPress® for copper and stainless steel cleaned and capped piping.
At Thunder Basin High School in Gillette, Wyoming, and Eastern Wyoming College in Torrington, Valley Plumbing was tapped to provide lines for specialty gases, as well as domestic water and hydronics.
However, at the high school, two of the requested uses for gas were not already approved by Viega. Valley Plumbing CCO Don Haught, with the help of Viega District Manager Keith Sayers, went through the approvals process for use of propylene and a carbon dioxide/argon mixture.
The specification required cleaned and capped pipe and fittings for specialty gas. It was essential that no foreign debris or contamination was introduced into the final systems. There were no additional steps taken other than what was done by Viega in the manufacturing process. Fittings are bagged and pipe is capped for delivery and storage. All pipe and fittings remain capped during and after installation.
“We worked with Viega, and they got us the approvals that we asked for to give to the engineers, things that weren’t already preapproved,” Haught said. “I’m a strong proponent of Viega. The Viega solution provides a cleaner, highly professional look and takes significantly less time to install.”
Viega ProPress used in welding-lab classrooms.
Haught and his team at Valley Plumbing have been using Viega since the early 2000s. He said the products are quicker to install, and he appreciates the “much cleaner look than brazing.”
In addition to the newly approved uses, other gases used at Thunder Basin High School include non-medical oxygen, argon and carbon dioxide in the welding-shop classroom. At Eastern Wyoming College, those same three gases are used in the welding area, along with acetylene and compressed air.
The building Valley Plumbing worked on at EWC was a new build, allowing the school to expand its welding labs as well as offer some new programs, including cosmetology and nursing, where training lines (not carrying actual oxygen) were run.
Using Viega products at both locations was a given for Haught. He said that in addition to the reliability of the fittings and the clean lines with installation, he knew he could work with the company to get the specific approvals needed without a hassle.
“We’re always looking for means and methods that make us more efficient and set us apart from the competition,” Haught said. “We like the fact that we’ve been using ProPress for more than 10 years, and many people around here are still not using it much. We always work with the engineers beforehand and try to get it approved before the project bids when possible.”
Viega. Connected in quality.
Click here to read more.
Related Stories
| May 15, 2012
National Tradesmen Day set for Sept. 21
IRWIN Tools invites the nation to honor "The Real Working Hands that Build America and Keep it Running Strong".
| May 14, 2012
Codes harvest rainwater
IAPMO’s Green Plumbing and Mechanical Code Supplement could make rainwater harvesting systems commonplace by clearly outlining safe installation and maintenance practices.
| May 14, 2012
Plumbing research coalition to study drainline transport issue
The effort is aimed at determining if decreasing levels of water flow––caused by increasingly efficient plumbing fixtures––are sufficient to clear debris from plumbing pipes.
| May 1, 2012
White paper discusses benefits of diaphragm and piston flushometer valves
The white paper highlights considerations that impact which type of technology is most appropriate for various restroom environments.
| May 1, 2012
Bruce E. Brooks Associates announces new commissioning subsidiary
Brooks + Wright Commissioning to be led by Will Wright.
| Apr 26, 2012
Blackney Hayes Architects launches new engineering division
The new division, BHH Engineers, will be led by Mark Hershman, PE.
| Jan 26, 2012
American Standard names Gould as president and CEO
Gould succeeds Don Devine, who led the successful turnaround of American Standard Brands.
| Dec 2, 2011
What are you waiting for? BD+C's 2012 40 Under 40 nominations are due Friday, Jan. 20
Nominate a colleague, peer, or even yourself. Applications available here.
| Oct 6, 2011
GREENBUILD 2011: Growing green building market supports 661,000 green jobs in the U.S.
Green jobs are already an important part of the construction labor workforce, and signs are that they will become industry standard.
| Oct 5, 2011
GREENBUILD 2011: Kohler builds sustainable booth at Greenbuild 2011
In a setting composed of reclaimed materials, biodegradable signage, energy-efficient lighting and more, exhibitor highlights its new products with ecological awareness.
