flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Open source tool allows comparison of embodied carbon emissions from construction materials

Codes and Standards

Open source tool allows comparison of embodied carbon emissions from construction materials

Enables carbon-smart choices during material specification and procurement.


By Peter Fabris, Contributing Editor | September 27, 2019

Courtesy Pixabay

The Carbon Leadership Forum has released the Embodied Carbon in Construction Calculator (“EC3”) tool.

The open source tool is for architects, engineers, owners, construction companies, building material suppliers and policy makers to compare and reduce embodied carbon emissions from construction materials.

Initial development was jointly funded by Skanska and Microsoft, with more than 30 industry leaders contributing to the effort. “Increasingly the building industry and owners are becoming aware that materials matter, and are seeking ways to evaluate the emissions associated with making these materials, but they have not had a reliable or efficient way to compare them,” according to a news release.

The EC3 tool simplifies this complex problem and will allow users to easily see the embodied carbon impacts of the materials before consumption, the release says. Details on the EC3 tool will be made available November 2019. The product will be demonstrated at Greenbuild, November 19-22, 2019 in Atlanta.

Related Stories

| Feb 9, 2012

Rapid growth of zero energy buildings expected

Much of that growth will be in the European Union, where near-zero energy buildings are mandated by 2019 for public buildings, and by 2021 for all construction.

| Feb 9, 2012

Stiffer OSHA fines put strain on Kansas contractors

A fine for a violation that once cost between $750 and $1,200 now runs $7,000 or more per incident, according to a state industry association official.

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

A Construction Specifications Institute webinar will focus on the lessons learned through the design and construction of a LEED-certified industrial project, Better Living Mill Shop, the first industrial building in Central Virginia to earn LEED certification.

| Feb 8, 2012

California likely to eliminate redevelopment agencies

Leaders of California cities had been trying to fashion a compromise with lawmakers after the state Supreme Court ruled the state had the authority to eliminate the agencies and use their property tax money for local services.

| Feb 8, 2012

Project aimed at economical seismic retrofits on historic Memphis structures

The group will develop a low-cost seismic retrofit model that would benefit aging brick-and-mortar structures. It involves bolting steel brackets to existing wooden floor and ceiling joists.

| Feb 8, 2012

Houston signs on to Better Buildings Challenge

The challenge has about $4 billion in federal and private-sector funds, which it will use for building energy upgrades nationwide in the next two years.

| Feb 8, 2012

OSHA offers free health and safety consulting for small businesses

The consultants offer confidential, non-punitive advice.

| Feb 8, 2012

Controversy over pay for prisoners on roofing job in Michigan

The disagreement was over whether the prisoners should have been paid prevailing wage for their brief time on the job because the project was paid for with a U.S. Department of Energy grant.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021