Bass Lofts, a design-forward urban loft project in a trendy Atlanta neighborhood, is now pioneering the loft movement in the city. Retrofitted from public schools built in the 1920s, the structures are listed on the National Register of Historic Places. The buildings sat empty in the middle of a rapidly-transforming neighborhood in Atlanta known as Little Five Points. The area has an abundance of new eateries, boutiques and live music and the new lofts were one of the first multifamily residences to be built there.
Larimer/Shannon Group, the development specialists on the project that helped design the structure and specify products, wanted to respect the integrity of the former two school buildings: a classroom building and a gymnasium. Their mission also applied to the roof, which had to be completely replaced without disturbing the historical aesthetic of the building.
To abide by the historical and city guidelines, Larimer/Shannon Group selected a fully adhered UltraPly™ TPO Roofing System from Firestone Building Products with polyiso insulation, high-density cover boards and an UltraPly TPO Walkway Pad.
Installers from Sentry Roof Services – who won the bid against four other contractors – had several challenges on their hands. First, installers had to identify the source of several leaks in the old roof that allowed water to seep into the walls and cause damage to the internal structure. After waterproofing the walls, contractors could then turn their attention to the roof.
“The building had areas that didn’t drain properly, so we had to engineer the appropriate drainage by adding a ½-inch slope,” said Sentry Roof Services’ Bill Lomel. “We had to find a low-rise foam adhesive that didn’t disturb the old concrete deck, so we turned to Firestone Building Products.”
Once a public school in the 1920s, Bass Lofts was retrofitted to accompany the modern feel of Atlanta’s lively Little Five Points neighborhood while still preserving the historic look and feel of the original structure.
The team used Firestone’s I.S.O. Twin Pack Insulation Adhesive, a two-component, low-rise polyurethane adhesive designed for anchoring roof insulation to substrates that adhere to multiple layers of insulation. The I.S.O. Twin Pack, an example of Firestone’s focus on environmental responsibility, contains no solvents, near zero Volatile Organic Compounds (VOCs), and no harmful hydrochlorofluorocarbons (HCFC) or chlorofluorocarbons (CFCs).
Contractors also faced the added challenge of working around more than 100 HVAC units scattered throughout the roof. Building owner Clark Ventures also knew this would mean the roof would be subject to high traffic from people servicing the HVAC units, and challenged Larimer/Shannon Group with designing a system that protected the roof while also providing access points for the mechanical service personnel.
The solution was Firestone Building Products UltraPly TPO Walkway Pad, a reinforced walkway composed of white thermoplastic material. With a textured surface and a smooth bottom that easily welded to the TPO roofing membrane, the walkway pad will protect the roof from unnecessary damage caused by foot traffic. Made from recycled materials, the reflective white surface also reduces thermal expansion.
The walkway pads made the roof system eligible for a 20-year Firestone Red Shield warranty with an additional puncture endorsement. This is a special cut and puncture rider for specific projects where design management is overseen by a professional roofing consultant, providing an extra layer of protection to the building envelope.
Due to Firestone Building Products durable roofing solutions, Bass Lofts was able to maintain the historically crafted look that respects the architectural details of the 1920s. Today, residents of Bass Lofts are able to enjoy all the amenities of the Little 5 Points neighborhood while living in one of the area’s most enduring buildings.
Related Stories
Roofing | Feb 23, 2023
What's new at the International Roofing Expo 2023
Rich Russo, Show Director for the International Roofing Expo (www.theroofingexpo.com) chats with Pro Remodeler's Erika Mosse and Building Design+Construction's David Barista about the new programs and initiates at IRE 2023, March 7-9, 2023, at the Kay Bailey Hutchison Convention Center in Dallas.
75 Top Building Products | Nov 30, 2022
75 top building products for 2022
Each year, the Building Design+Construction editorial team evaluates the vast universe of new and updated products, materials, and systems for the U.S. building design and construction market. The best-of-the-best products make up our annual 75 Top Products report.
K-12 Schools | Nov 30, 2022
School districts are prioritizing federal funds for air filtration, HVAC upgrades
U.S. school districts are widely planning to use funds from last year’s American Rescue Plan (ARP) to upgrade or improve air filtration and heating/cooling systems, according to a report from the Center for Green Schools at the U.S. Green Building Council. The report, “School Facilities Funding in the Pandemic,” says air filtration and HVAC upgrades are the top facility improvement choice for the 5,004 school districts included in the analysis.
Building Materials | Nov 2, 2022
Design for Freedom: Ending slavery and child labor in the global building materials sector
Sharon Prince, Founder and CEO of Grace Farms and Design for Freedom, discusses DFF's report on slavery and enforced child labor in building products and materials.
Sponsored | Roofing | Oct 13, 2022
Tedlar® PVF Film Out-Performs PVDF Paints for Metal Protection
Tedlar® PVF film from DuPont has been used in demanding outdoor environments for 50+ years. It is extremely durable, showing virtually no fading or chalking after decades of sun exposure. Extremely flexible and chemically-resistant, Tedlar® does not crack or corrode, even in harsh environments. Tedlar® was recently chosen to protect the aluminum roof installed on a seafront hotel in Hilton Head, SC. Read the case study to learn why Tedlar® was chosen over high-end coatings, and how the building owner and installer enjoy longer warranties with less restrictions and maintenance.
Building Materials | Aug 3, 2022
Shawmut CEO Les Hiscoe on coping with a shaky supply chain in construction
BD+C's John Caulfield interviews Les Hiscoe, CEO of Shawmut Design and Construction, about how his firm keeps projects on schedule and budget in the face of shortages, delays, and price volatility.
Building Materials | Jun 20, 2022
Early-stage procurement: The next evolution of the construction supply chain
Austin Commercial’s Jason Earnhardt explains why supply chain issues for the construction industry are not going to go away and how developers and owners can get ahead of project roadblocks.
Sponsored | Multifamily Housing | May 8, 2022
Choosing the right paver system for rooftop amenity spaces
This AIA course by Hoffmann Architects offers best practices for choosing the right paver system for rooftop amenity spaces in multifamily buildings.
Building Technology | Feb 28, 2022
BIPV and solar technology is making its mark in the industry
Increasingly, building teams are comparing the use of building-integrated photovoltaic (BIPV) systems for façades, roofs, and other architectural assemblies with a promising and much easier alternative: conventional solar panel arrays, either on their building or off-site, to supplement their resiliency and decarbonization efforts
Sponsored | BD+C University Course | Jan 30, 2022
Optimized steel deck design
This course provides an overview of structural steel deck design and the ways to improve building performance and to reduce total-project costs.