Reed Construction Data announced its December Expansion Index stood at 1.48, indicating overall construction in the United States is expected to grow over the next 12 months.
“The positive signs of growth are encouraging and align with other economic data,” said Bernard Markstein, U.S. Chief Economist, Reed Construction Data. “With an Expansion Index greater than 1 in 41 states plus the District of Columbia, the expected improvement in construction appears widespread across the country.” The top five states expected to see an expanding construction market: North Dakota, Rhode Island, Montana, Virginia, Utah.
The Expansion Index is a monthly measure of expectations for the construction marketplace over the upcoming 12-18 months, based on the value of projects in the planning pipeline. A reading greater than 1 indicates construction volume is expected to expand.
In addition to an overall measure of U.S. construction, Reed uses the Expansion Index to track expected construction volume for every state and more than 360 Metropolitan Statistical Areas.
According to Markstein, multiple factors are supporting the positive signal.
“Many pieces are falling into place for a moderately faster-growing economy,” stated Markstein. “Companies are experiencing rising demand. A federal budget deal was signed into law. Residential construction continues to improve. Europe is slowly working its way out of recession. These and other positives mean the Reed Expansion Index is likely to remain well above 1 for several months–an indication that construction activity will rise throughout the year.”
The Expansion Index is a ratio of the value of projects in the planning phase over the value of the projects estimated to be still under construction in a defined geography and/or building segment. The relationship says if more in the pipeline than underway, the volume will increase in the future if that ratio is greater than 1. The data covered includes non-residential and multifamily residential construction.
To view the Expansion Index, visit www.reedconstructiondata.com/market-intelligence/expansion-index.
| 20 Fastest-growing MSAs | |
|---|---|
| MSA | EI rating |
| Duluth, MN-WI Durham, NC El Centro, CA Evansville, IN-KY Flagstaff, AZ Flint, MI Grand Forks, ND-MN Greenville, NC Laredo, TX Logan, UT-ID Missoula, MT Muskegon-Norton Shores, MI Providence-New Bedford-Fall River, RI-MA Salem, OR Waterloo-Cedar Falls, IA Clarksville, TN-KY VA Beach-Norfolk-Newport News, VA-NC Columbia, MO Baton Rouge, LA Greensboro-High Point, NC |
>10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 >10 9.56 7.75 7.67 6.91 6.77 |
About Reed Construction Data
Reed Construction Data is a trusted source for detailed, accurate, and up-to-date information on private and public construction projects across the United States and Canada. Reed’s data collection teams leverage strong industry relationships, innovative technology, and third-party data sources to deliver timely and accurate information on projects, companies, and contacts and daily updates for all types of general and civil construction. For more information, visit www.reedconstructiondata.com.
Related Stories
| Nov 15, 2010
Gilbane to acquire W.G. Mills, Inc.
Rhode Island-based Gilbane Building Company announced plans to acquire W.G. Mills, Inc., a construction management firm with operations based in Florida. The acquisition will dramatically strengthen Gilbane’s position in Florida’s growing market and complement its already established presence in the southeast.
| Nov 11, 2010
Saint-Gobain to make $80 million investment in SAGE Electrochromics
Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.
| Nov 11, 2010
Saint-Gobain to make $80 million investment in SAGE Electrochromics
Saint-Gobain, one of the world’s largest glass and construction material manufacturers, is making a strategic equity investment in SAGE Electrochromics to make electronically tintable “dynamic glass” an affordable, mass-market product, ushering in a new era of energy-saving buildings.
| Nov 11, 2010
USGBC certifies more than 1 billion square feet of commercial space
This month, the total footprint of commercial projects certified under the U.S. Green Building Council’s LEED Green Building Rating System surpassed one billion square feet. Another six billion square feet of projects are registered and currently working toward LEED certification around the world. Since 2000, more than 36,000 commercial projects and 38,000 single-family homes have participated in LEED.
| Nov 10, 2010
$700 million plan to restore the National Mall
The National Mall—known as America’s front yard—is being targeted for a massive rehab and restoration that could cost as much as $700 million (it’s estimated that the Mall has $400 million in deferred maintenance alone). A few of the proposed projects: refurbishing the Grant Memorial, replacing the Capitol Reflecting Pool with a smaller pool or fountain, reconstructing the Constitution Gardens lake and constructing a multipurpose visitor center, and replacing the Sylvan Theater near the Washington Monument with a new multipurpose facility.
| Nov 9, 2010
Just how green is that college campus?
The College Sustainability Report Card 2011 evaluated colleges and universities in the U.S. and Canada with the 300 largest endowments—plus 22 others that asked to be included in the GreenReportCard.org study—on nine categories, including climate change, energy use, green building, and investment priorities. More than half (56%) earned a B or better, but 6% got a D. Can you guess which is the greenest of these: UC San Diego, Dickinson College, University of Calgary, and Dartmouth? Hint: The Red Devil has turned green.
| Nov 9, 2010
12 incredible objects being made with 3D printers today
BD+C has reported on how 3D printers are attracting the attention of AEC firms. Now you can see how other creative types are utilizing this fascinating printing technology. Among the printed items: King Tut’s remains, designer shoes, and the world’s smallest Rubik’s Cube.
| Nov 9, 2010
U.S. Army steps up requirements for greening building
Cool roofs, solar water heating, and advanced metering are among energy-efficiency elements that will have to be used in new permanent Army buildings in the U.S. and abroad starting in FY 2013. Designs for new construction and major renovations will incorporate sustainable design and development principles contained in ASHRAE 189.1.
