flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Standard for conducting, reporting energy audits open for review

Standards

Standard for conducting, reporting energy audits open for review

A joint ASHRAE/ACCA proposal seeks comments from industry professionals.


By Peter Fabris, Contributing Editor | August 16, 2016

Pixabay Public Domain

A proposed joint standard from ASHRAE and Air Conditioning Contractors of America (ACCA) that establishes consistent practices for conducting and reporting energy audits is open for a 45-day American National Standards Institute (ANSI) public review.

Standard 211P defines the procedures required to perform ASHRAE Level 1, 2, and 3 Energy Audits, and provide a common scope of work for these audit levels for use by building owners and others as well as establishes standardized industry practices and minimum reporting requirements for the results.

An initial Advisory Public Review (non-ANSI) of the standard that closed in December 2015 resulted in more than 600 comments from some 100 people. ASHRAE/ACCA Standard 211P, Standard for Commercial Building Energy Audits, is open for comments from Aug. 5 until Sept. 19, 2016. To comment, visit www.ashrae.org/publicreviews.

Related Stories

| Mar 27, 2013

CEIR releases tool that measures energy, environmental benefits of roof systems

The Center for Environmental Innovation in Roofing (CEIR) released its new RoofPoint Energy and Carbon Calculator that is designed to help roofing professionals measure the energy and environmental benefits of modern roof system technologies.

| Mar 22, 2013

Earn $500 as a DOE proposal reviewer

The DOE'S Building Technologies Office this morning put out a call to the AEC industry for expert reviewers for its new energy-efficiency initiative for small commercial buildings, which make up more than 90% of the commercial building stock.

| Mar 19, 2013

Colorado Zero Energy District project shows how businesses can reach zero-energy standard

An ambitious experiment in Fort Collins, Colo., is supporting development of the nation’s first major urban zero-energy district.

| Mar 19, 2013

New LEED for Neighborhood Development and Historic Preservation guide released

A new guidance manual, LEED for Neighborhood Development and Historic Preservation, outlines strategies geared towards helping building teams incorporate historic resources into their developments.

| Mar 18, 2013

USGBC to GAO: 'Schools need over $271 billion in maintenance fixes'

  The Center for Green Schools at the U.S. Green Building Council (USGBC) has released its first “State of our Schools” report, highlighting the  critical need to modernize school facilities to meet current health, safety and educational standards. 

| Mar 14, 2013

Survey: Market demand now key driver for green construction

Construction firms across the world expect 60% of their projects to be environmentally friendly by 2015, according to the SmartMarket Report of McGraw-Hill Construction.

| Mar 14, 2013

Concrete Polishing Association of America releases new standards

The Concrete Polishing Association of America(CPAA) Standards Committee, which reflects a cross-section of the concrete polishing industry, has created terminology to define the products and processes used to produce insitu polished concrete.

| Mar 14, 2013

World Green Building Council: Green buildings help mitigate real estate risk

Green buildings can offer benefits to a wide array of stakeholders throughout their life cycle, according to a report released by the World Green Building Council.

| Mar 14, 2013

Sustainability index aims to evaluate REITs on the greenness of their properties

FTSE Group, the National Association of Real Estate Investment Trusts, and the U.S. Green Building Council are working on a sustainability index that measures the portfolios of real estate investment trusts to provide transparency about LEED certification and Energy Star ratings.

| Mar 6, 2013

Triple-pane windows, heat pumps part of New York’s plan to meet 2050 emissions goal

Renovations providing better insulation, triple-paned windows, heat pumps and other techniques that minimize heat loss and save on energy use for residential and commercial buildings are key to New York City’s goal of reducing its carbon emissions by 90% by 2050.

boombox1
boombox2
native1

More In Category


Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021