flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Survey: Number of licensed architects grows in 2012-13

Survey: Number of licensed architects grows in 2012-13

A survey by NCARB shows that there are 105,847 registered architects in the U.S., up slightly from the organization's 2011-2012 survey.


By NCARB | December 30, 2013
Photo: Khunaspix; Freedigitalphotos.net
Photo: Khunaspix; Freedigitalphotos.net
The 2013 survey of U.S. architectural registration boards by NCARB indicates that there are currently 105,847 registered architects in the United States. This represents a 0.24% increase in licensed architects from last year’s survey. Data were collected in fall 2013 from the jurisdictions and reflects July 2012 through June 2013.
 
The 2013 survey also reveals that there are 121,535 reciprocal (out-of state) architects, for a total of 227,382 registrations. This represents an increase of 3% in reciprocal licenses, and a 1.69% increase in overall registrations. California has the highest number of resident architects (16,191) and the highest number of total registrations (19,899).
 
NCARB collects data for the survey from its 54 Member Boards, which includes all 50 states, the District of Columbia, Guam, Puerto Rico, and the U.S. Virgin Islands. NCARB makes this information available annually as a service to the profession. For more information about the 2013 Survey of Registered Architects, contact NCARB at 202.783.6500.

 

Jurisdiction Resident Reciprocal Total
Alabama 901 1,853 2,754
Alaska 257 365 622
Arizona * 2,164 3,897 6,061
Arkansas 495 850 1,345
California 16,191 3,708 19,899
Colorado 3,256 3,225 6,481
Connecticut 1,514 2,794 4,308
Delaware 118 1,538 1,656
District of Columbia 699 2,426 3,125
Florida 4,491 4,427 8,918
Georgia *** 2,404 2,952 5,356
Guam 33 74 107
Hawaii 1,027 1,345 2,372
Idaho 491 1,173 1,664
Illiniois 5,306 3,740 9,046
Indiana 1,056 1,836 2,892
Iowa 1,106 2,482 3,588
Kansas 936 1,838 2,774
Kentucky ** 718 1,641 2,359
Louisiana 1,213 2,038 3,251
Maine 425 1,094 1,519
Maryland 1,995 3,745 5,740
Massachusetts 3,715 2,912 6,627
Michigan * 2,570 3,132 5,702
Minnesota 1,947 1,534 3,481
Mississippi 364 1,512 1,876
Missouri 2,055 3,015 5,070
Montana 441 957 1,398
Nebraska 546 1,234 1,780
Nevada 530 2,240 2,770
New Hampshire 311 1,487 1,798
New Jersey 3,096 4,896 7,992
New Mexico 712 1,493 2,205
New York 9,707 6,808 16,515
North Carolina * 2,248 2,921 5,169
North Dakota 154 856 1,010
Ohio 2,650 3,929 6,579
Oklahoma 763 1,281 2,044
Oregon 1,654 1,284 2,938
Pennsylvania **** 3,653 4,326 7,979
Puerto Rico *** 609 126 735
Rhode Island 310 1,266 1,576
South Carolina * 1,066 2,698 3,764
South Dakota 111 697 808
Tennessee 1,514 2,206 3,720
Texas 8,427 4,374 12,801
Utah 827 1,697 2,524
Vermont 289 729 1,018
Virgin Islands 163 948 1,111
Virginia 2,790 4,221 7,011
Washington 3,866 2,314 6,180
West Virginia 100 1,037 1,137
Wisconsin * 1,727 3,361 5,088
Wyoming 136 1,003 1,139
TOTAL 105,847 121,535 227,382
 

* Counts are from 2012 data
** Counts are from 2011 data
*** Counts are from 2010 data
**** Resident counts from 2013 data

######

Related Stories

Sustainability | Sep 18, 2024

3 living buildings made by a living practice

Prompting humans to reexamine our relationship to the environment, architecture creates the opportunity for us to physically experience ideas of beauty, performance, and structure through the distinct lens of place.

3D Printing | Sep 17, 2024

Alquist 3D and Walmart complete one of the nation’s largest free-standing, 3D-printed commercial structures

Walmart has completed one of the largest free-standing, 3D-printed commercial structures in the US. Alquist 3D printed the almost 8,000-sf, 20-foot-high addition to a Walmart store in Athens, Tenn. The expansion, which will be used for online pickup and delivery, is the first time Walmart has applied 3D printing technology at this scale. 

Retail Centers | Sep 17, 2024

Thinking outside the big box (store)

For over a decade now, the talk of the mall industry has been largely focused on what developers can do to fill the voids left by a steady number of big box store closures. But what do you do when big box tenants stay put?

Government Buildings | Sep 17, 2024

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.

Codes and Standards | Sep 17, 2024

New California building code encourages, but does not mandate heat pumps

New California homes are more likely to have all-electric appliances starting in 2026 after the state’s energy regulators approved new state building standards. The new building code will encourage installation of heat pumps without actually banning gas heating. 

Mass Timber | Sep 17, 2024

Marina del Rey mixed-use development is L.A.’s largest mass timber project

An office-retail project in Marina del Rey is Los Angeles’ largest mass timber project to date. Encompassing about 3 acres, the 42XX campus consists of three low-rise buildings that seamlessly connect with exterior walkways and stairways. The development provides 151,000 sf of office space and 1,500 sf of retail space.

Education Facilities | Sep 16, 2024

Hot classrooms, playgrounds spur K-12 school districts to go beyond AC for cooling

With hotter weather occurring during the school year, school districts are turning to cooling strategies to complement air conditioning. Reflective playgrounds and roads, cool roofs and window films, shade structures and conversion of asphalt surfaces to a natural state are all being tried in various regions of the country. 

Office Buildings | Sep 16, 2024

Maximizing office square footage through ‘agile planning’

Lauren Elliott, RID, NCIDQ, Director of Interior Design, Design Collaborative, shares tips for a designing with a popular and flexible workspace model: Agile planning.

3D Printing | Sep 13, 2024

Swiss researchers develop robotic additive manufacturing method that uses earth-based materials—and not cement

Researchers at ETH Zurich, a university in Switzerland, have developed a new robotic additive manufacturing method to help make the construction industry more sustainable. Unlike concrete 3D printing, the process does not require cement.

Libraries | Sep 12, 2024

How space supports programming changes at university libraries

GBBN Associate Sarah Kusuma Rubritz, AIA, uses the University of Pittsburgh's Hillman Library to showcase how libraries are transforming to support students’ needs.

boombox1
boombox2
native1

More In Category


Urban Planning

Bridging the gap: How early architect involvement can revolutionize a city’s capital improvement plans

Capital Improvement Plans (CIPs) typically span three to five years and outline future city projects and their costs. While they set the stage, the design and construction of these projects often extend beyond the CIP window, leading to a disconnect between the initial budget and evolving project scope. This can result in financial shortfalls, forcing cities to cut back on critical project features.



Libraries

Reasons to reinvent the Midcentury academic library

DLR Group's Interior Design Leader Gretchen Holy, Assoc. IIDA, shares the idea that a designer's responsibility to embrace a library’s history, respect its past, and create an environment that will serve student populations for the next 100 years.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021