flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Three drywall code-referenced publications have been updated

Codes and Standards

Three drywall code-referenced publications have been updated

Include guidance on fire resistance, sound control, application, and finishing.


By David Malone, Associate Editor | July 15, 2021

The Gypsum Association has released new editions of three code-referenced publications.

The documents, GA-600-2021 Fire Resistance and Sound Control Design ManualGA-216-2021 Application and Finishing of Gypsum Panel Products, and GA-253-2021 Application of Gypsum Sheathing, have been updated for the latest International Building Code and The National Fire Codes. GA-216 Application and Finishing of Gypsum Panel Products is colloquially known as the “Drywall Hanger’s Bible,” according to an association news release. It provides detailed information about hanging interior gypsum panels of every type and under a wide variety of circumstances.

GA-253 Application of Gypsum Sheathing is essential when installing this increasingly popular exterior gypsum glass mat substrate, the release says. It describes the minimum requirements for application of gypsum sheathing for use as a substrate, and appropriate methods of handling and storage. Tables provide data on minimum fastener lengths and shear values.

Related Stories

| Dec 15, 2011

Dayton, Ohio schools saving $2.6 million annually by building to LEED

On average, green schools save about $100,000 a year on operating costs, including energy and water savings.

| Dec 15, 2011

Building to LEED standards can pose new risks for construction workers

Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.

| Dec 15, 2011

NRDC charges Maine governor with weakening green wood requirement

The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.

| Dec 15, 2011

Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas

Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.

| Dec 15, 2011

Allentown, Pa. city council asked to repeal union-friendly law

The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.

| Dec 13, 2011

LEED-EB outpaces LEED for new construction

The U.S. Green Building Council's (USGBC's) LEED certifications for existing buildings standard is outpacing LEED for new buildings for the first time.

| Dec 13, 2011

Regulators charge pervasive abuse of construction workers in Connecticut

Federal and state regulators say they have uncovered what they call "widespread noncompliance" with minimum wage and overtime laws in Connecticut's construction industry.

| Dec 13, 2011

Philadelphia mayor signs order for project labor agreements

Philadelphia Mayor Michael Nutter signed an executive order establishing project labor agreements for major public works projects in Philadelphia.

| Dec 13, 2011

Improved code requirements for attic ventilation

The Roof Assembly Ventilation Coalition (RAVC) participated in the development of the code.

| Dec 12, 2011

LEED-EB Outpaces LEED for New Construction

The U.S. Green Building Council’s (USGBC’s) LEED certifications for existing buildings standard is outpacing LEED for new buildings for the first time.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021