flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

USGBC-LA chooses first ‘Net Zero Accelerator’ technologies

Codes and Standards

USGBC-LA chooses first ‘Net Zero Accelerator’ technologies

Wide range of solutions address numerous environmental challenges.


By Peter Fabris, Contributing Editor | July 31, 2019

Courtesy Pixabay

The U.S. Green Building Council-Los Angeles Chapter (USGBC-LA) has chosen its first technology solutions under its Net Zero Accelerator program.

The program’s goal is to identify viable net zero building technologies, position them for success, and accelerate their market entry throughout the Los Angeles region. The 13 technologies were selected from 68 applicants from 11 countries.

The 13 technology solutions are:

Advanced building materials — DTE Materials

Energy efficiency — arbnco, Keewi, and SkyCool Systems

Energy storage — Shifted Energy and Yotta Energy

HVAC optimization — KomfortIQ and Blue Box Air

Renewable energy generation — Next Energy Technologies, Inc. (NEXT)

Waste diversion and reuse — Angel City Lumber and ByFusion

Water conservation / control — Saya Technology

Urban agriculture — inHouse Produce

“This is an exceptionally compelling group of companies bringing diverse solutions to market that address our shared goals,” says Neal Anderson, Director of the Accelerator, and former Co-Founder of the LA Cleantech Incubator, in a news release. “We're excited to help them overcome market-entry barriers often encountered by new technologies, and pair them with the green building experts and significant pilot sites throughout the Los Angeles region to see results before the new year, and keep the momentum rolling.”

Related Stories

| Mar 22, 2012

Bill would reintroduce “opt-out” provision in lead paint law

The Lead Exposure Reduction Amendments Act of 2012 (S2148) would restore the "Opt-Out" provision removed from the Environmental Protection Agency's Lead Renovate, Repair and Painting (LRRP) rule in April 2010.

| Mar 15, 2012

New Florida building code establishes flood and storm surge provisions

The new 2010 code establishes minimum design and construction requirements to protect buildings from wind, rain, floods, and storm surges.

| Mar 15, 2012

Illinois city rejects international code due to home sprinkler requirement

Macomb, Illinois aldermen voted to recommend that the city not adopt 2012 international building and residential code standards requiring the installation of overhead sprinkler systems in newly constructed one-family and two-family homes.

| Mar 15, 2012

Tenant advocates propose licensing landlords in New York City

With thousands of New York City rental units posing potential dangers to tenants, city advocates are proposing measures to make landlords improve building safety.

| Mar 15, 2012

Construction industry a big winner in federal small disadvantaged business procurement

Last year, only 5% of federal contract dollars went to small disadvantaged businesses. Construction and facilities support firms were the biggest beneficiaries.

| Mar 15, 2012

ANSI approves new fall protection standards

The American National Standards Institute (ANSI) has approved two American Society of Safety Engineers' (ASSE) standards addressing fall protection.

| Mar 8, 2012

Engineering innovation provides new option for meeting seismic codes in skyscrapers

Two University of Toronto engineers have developed “viscoelastic-energy-dissipating dampers” to replace many of the heavy concrete beams used in tall structures.

| Mar 8, 2012

CSI webinar on building code compliance March 22

A March 22 webinar will provide an overview of a 28-step process during the design of a building to ensure compliance with building codes.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021