When it comes to kitchen and bath design trends for both single-family and multifamily residences, contemporary is in, with clean, minimal lines and little ornamentation.
Universal design amenities and easy-maintenance features are also trending, according to a recent survey of more than 420 kitchen and bath design professionals by the National Kitchen and Bath Association (NKBA).
This year, consumers want kitchens that have “simple lines and not as much frou-frou, and are more about good storage and space planning,” summed up one NKBA designer.
Consumers want bathrooms to be “spaces to retreat and relax,” commented one member, “with luxurious details whenever possible.” Another sees “a general move toward simplicity in style, minimal color, but maximizing the features and storage.”
They are also demanding more universal design features. Fifty-seven percent of NKBA designers specified accessible or universal design features in bathrooms in 2013, and 56% incorporated them into kitchens. A majority of respondents anticipate adding more of these features, such as shower benches, comfort-height toilets, and vanities in baths; and microwave drawers and touch-activated or touch-less kitchen faucets in 2014.
The demand for easy maintenance spaces and products is also growing.
Bathroom design trends
1. Beige, bone and gray are hot and getting hotter
2. Universal design is becoming more universal
3. Soaking tubs are in the spotlight
4. Shower seating is here to stay
5. Radiant floors may be heating up
6. Steam showers are gaining steam
7. No holding back on no-threshold showers
8. Comfort is key when it comes to toilets and vanities
Kitchen Design Trends
9. Granite is on top, but quartz is catching up
Some 70% of respondents see quartz countertops increasing in 2014. At the end of 2013, granite and quartz were almost tied for the top spot in countertop materials, at 91% and 90% respectively.
10. Stainless is timeless
11. Pullout faucets still pulling ahead
12. Microwave drawers beating out warming drawers
13. Gray and white are hand-in-hand
14. LEDs outshine incandescents
15. Cherry tops the wood types in cabinets
16. Flooring stays steady with wood, ceramic/porcelain
Related Stories
| Jan 4, 2011
Product of the Week: Zinc cladding helps border crossing blend in with surroundings
Zinc panels provide natural-looking, durable cladding for an administrative building and toll canopies at the newly expanded Queenstown Plaza U.S.-Canada border crossing at the Niagara Gorge. Toronto’s Moriyama & Teshima Architects chose the zinc alloy panels for their ability to blend with the structures’ scenic surroundings, as well as for their low maintenance and sustainable qualities. The structures incorporate 14,000 sf of Rheinzink’s branded Angled Standing Seam and Reveal Panels in graphite gray.
| Jan 4, 2011
6 green building trends to watch in 2011
According to a report by New York-based JWT Intelligence, there are six key green building trends to watch in 2011, including: 3D printing, biomimicry, and more transparent and accurate green claims.
| Jan 4, 2011
LEED standards under fire in NYC
This year, for the first time, owners of 25,000 commercial properties in New York must report their buildings’ energy use to the city. However, LEED doesn’t measure energy use and costs, something a growing number of engineers, architects, and landlords insist must be done. Their concerns and a general blossoming of environmental awareness have spawned a host of rating systems that could test LEED’s dominance.
| Jan 4, 2011
LEED 2012: 10 changes you should know about
The USGBC is beginning its review and planning for the next version of LEED—LEED 2012. The draft version of LEED 2012 is currently in the first of at least two public comment periods, and it’s important to take a look at proposed changes to see the direction USGBC is taking, the plans they have for LEED, and—most importantly—how they affect you.
| Jan 4, 2011
California buildings: now even more efficient
New buildings in California must now be more sustainable under the state’s Green Building Standards Code, which took effect with the new year. CALGreen, the first statewide green building code in the country, requires new buildings to be more energy efficient, use less water, and emit fewer pollutants, among many other requirements. And they have the potential to affect LEED ratings.
| Jan 4, 2011
New Years resolutions for architects, urban planners, and real estate developers
Roger K. Lewis, an architect and a professor emeritus of architecture at the University of Maryland, writes in the Washington Post about New Years resolutions he proposes for anyone involved in influencing buildings and cities. Among his proposals: recycle and reuse aging or obsolete buildings instead of demolishing them; amend or eliminate out-of-date, obstructive, and overly complex zoning ordinances; and make all city and suburban streets safe for cyclists and pedestrians.
| Jan 4, 2011
An official bargain, White House loses $79 million in property value
One of the most famous office buildings in the world—and the official the residence of the President of the United States—is now worth only $251.6 million. At the top of the housing boom, the 132-room complex was valued at $331.5 million (still sounds like a bargain), according to Zillow, the online real estate marketplace. That reflects a decline in property value of about 24%.
| Jan 4, 2011
Luxury hotel planned for Palace of Versailles
Want to spend the night at the Palace of Versailles? The Hotel du Grand Controle, a 1680s mansion built on palace grounds for the king's treasurer and vacant since the French Revolution, will soon be turned into a luxury hotel. Versailles is partnering with Belgian hotel company Ivy International to restore the dilapidated estate into a 23-room luxury hotel. Guests can live like a king or queen for a while—and keep their heads.
| Jan 4, 2011
Grubb & Ellis predicts commercial real estate recovery
Grubb & Ellis Company, a leading real estate services and investment firm, released its 2011 Real Estate Forecast, which foresees the start of a slow recovery in the leasing market for all property types in the coming year.
| Jan 4, 2011
Furniture Sustainability Standard - Approved by ANSI and Released for Distribution
BIFMA International recently announced formal American National Standards Institute (ANSI) approval and release of the ANSI/BIFMA e3-2010 Furniture Sustainability Standard. The e3 standard represents a structured methodology to evaluate the "sustainable" attributes of furniture products and constitutes the technical criteria of the level product certification program.
