Outpatient facilities have become the darlings of the healthcare construction sector in recent years. By even the most conservative measure, spending on outpatient construction is expected to grow anywhere from 20-30% in the next decade.
“In the early 1990s, outpatient care accounted for only 10 to 15% of hospital revenue; today, it’s closer to 60%,” says Patrick Duke, Senior Vice President with KLMK Group, Richmond, Va. “It’s a shift that’s been happening across the board, sweeping along academic medical centers, community hospitals, for-profit chains, and not-for-profit providers alike,” says Duke, a Building Design+Construction “40 Under 40” honoree. “And it’s showing no sign of slowing, especially with advancements in care and changing reimbursement patterns.”
This shift in service modes should not be surprising. Outpatient facilities typically allow healthcare organizations and physician groups to deliver care at lower cost than can be done in inpatient environments. They are generally less expensive to design, build, operate, and maintain, which translates to higher profits for their owners. And with the Affordable Care Act on the horizon, demand for outpatient care facilities is likely to accelerate.
What healthcare clients are demanding from Building Teams
1. EXPECT DEMAND for easily reconfigurable spaces in outpatient facilities to be on the rise.
2. BE PREPARED to rethink the conventional wisdom about underfloor air systems in healthcare facilities.
3. LOOK FORWARD to heightened scrutiny of facility quality and operational performance.
4. ANTICIPATE greater pressure from clients for you to deliver ‘affordable elegance.’
5. WATCH FOR healthcare providers to put you on a ‘Lean’ diet.
However, these kinds of projects are becoming increasingly difficult to execute, as healthcare clients see outpatient environments as a means not only to deliver better patient outcomes and experiences, but also as a way to provide flexibility to meet their own rapidly changing organizational needs and strategies.
Building Design+Construction combed the healthcare design and construction sector to evaluate the latest developments in outpatient facility designs. Here are five radical trends to watch.
1. Expect demand for easily reconfigurable spaces in outpatient facilities to be on the rise.
At the Spectrum Health ambulatory center, exam and procedure rooms are located at the center of the plan, rather than at the perimeter, to create a more reconfigurable environment. Interior exam rooms receive daylight through clerestory windows. Designers from Integrated Architecture used mockups to test room configurations. Photo: Justin Maconochie
Like most large healthcare providers, Spectrum Health System. a seven-hospital nonprofit system in Grand Rapids, Mich., is constantly struggling to stay ahead of changing conditions in the healthcare field. With more than two-dozen inpatient and outpatient locations throughout Michigan, having to deal with this moving target puts a huge burden on Spectrum’s facilities.
On average, Spectrum makes a major renovation to its spaces every four years. “In some cases, they’re touching spaces every two years,” says Michael Corby, FAIA, LEED AP, Executive Vice President with Integrated Architecture, Grand Rapids, who has worked on multiple projects for Spectrum. “It is extremely costly, as you can imagine.”
To reduce both costs and the noise, dust, and disruption associated with renovation work, while simultaneously enhancing operational efficiency, work environments, and patient experience, Spectrum Health commissioned Integrated Architecture to develop a highly flexible, reconfigurable outpatient facility model.
The designers tested a number of physical mockups to get the optimal configuration, which turned out to be a 9x12-foot patient exam room. “Once we got the exam room piece resolved, we started to build on that,” says Corby.
All other spaces became increments of the exam room module: a procedure room becomes one-and-a-half times the size of an exam room; a utility room becomes half the size of an exam room—“so they can replace an exam room with, let’s say, two utility room modules,” says Corby.
Corby says the team put the design scheme to the test halfway into the construction documentation process, when Spectrum decided to shift its care groups around. “Imagine that, halfway into the planning, the client says to you, ‘We’re going to move primary care up here and subspecialists over there,’ it would have been disastrous under a traditional planning process,” he says. “But because of the modularity, it took us all of 60 minutes to redo the floor plan.”
The resulting design scheme was first applied at Spectrum Health Medical Group’s new ambulatory center in Holland, Mich., and is currently being replicated at several other outpatient centers in Spectrum’s network. The 58,000-sf facility follows a consolidated delivery model, where both primary-care providers and subspecialists are housed under a single roof. “This has been done before, but what is unusual is the fact that they wanted the mix to not be limited by the facility,” says Corby.
To achieve the kind of flexibility of spatial use that the client wanted, Integrated Architecture had to depart from more traditional outpatient facility plans. For instance, the exam rooms are located in the central core of the facility instead of at the perimeter. With its open-plan configuration, the facility incorporates underlying modularity that allows patient rooms, workspaces, conference rooms, and other spaces to change in function, location, and dimension as needed, without the need for intense renovation.
The floor plan for Spectrum’s Holland, Mich., facility was organized around the dimensions of the exam rooms (green), which were optimized at 9X12 feet using physical mockups. The resulting 30-foot-wide bays responded to the unit size of the exam rooms. All other rooms, including procedure rooms (large green) and utility spaces (blue), became multiples of the exam room module.
CLICK TO ENLARGE PLAN - FIRST LEVEL
CLICK TO ENLARGE PLAN - SECOND LEVEL
[pagebreak]
2. Be prepared to rethink the conventional wisdom about underfloor air systems in healthcare facilities.
Underfloor air distribution is one of the design innovations at the new Spectrum Health Medical Group’s ambulatory center, in Holland, Mich. The UFAD scheme reduces energy consumption and allows the spaces to be reconfigured without dramatic renovation costs. Photo: Justin Maconochie
How do you make a roomful of healthcare design and infection control experts utter a collective gasp? Simple. Just mention “healthcare” and “UFAD” in the same sentence.
That’s what happened when Corby presented underfloor air distribution for the new Spectrum Health facility to a group of healthcare professionals last fall. “For a lot of people, especially those who are involved with infection control, it scares them,” says Corby.
He insists that UFAD is safe for outpatient care facilities like the one in Holland, Mich. “Spectrum’s infection control experts checked it out and found no inherent issues from an infection control standpoint,” he says. “It’s actually healthier, because the air is coming to the occupants in its freshest state. You’re not mixing the stale air that’s rising through the ductwork.”
However, Alan Kranzo, Spectrum’s Director of Facility Planning and Operations, cautions that the technology may not be appropriate for every outpatient facility. “The Spectrum facility was an ambulatory patient visit environment, where they’re just doing patient exams,” he says. “We would never consider UFAD in an operating room, where procedures are being done.”
In pitching the idea of using UFAD to Spectrum management, Corby and his team analyzed the average cost and operational impact of recent renovations at the organization’s other facilities. “We showed them that, had these facilities had UFAD, they would have saved 30% on average of the cost of the renovation, because they would not have had to core through floors, shut down operations, and affect the surrounding areas,” he says.
In fact, underfloor air distribution (in combination with Spectrum’s modular facility plan) has enabled the organization to change out spaces much faster and at lower cost, without dramatically affecting daily operations.
The technology pencils out on the initial cost side, too. The entire Spectrum facility uses UFAD, at a first cost of $6-7/sf. But when the upfront savings on mechanical system components (less ductwork, smaller fans, etc.) is factored in, the investment is a wash, says Corby. On top of that, the project’s energy models show that UFAD will deliver anywhere from 20 to 30% savings in ongoing energy costs.
Corby expects to see more healthcare organizations give UFAD a closer look as they search for ways to create more flexible and adaptable outpatient spaces. “I think it’s revolutionary as it is related to healthcare,” says Corby, who has done four UFAD applications for healthcare clients.
[pagebreak]
3. Look forward to heightened scrutiny of facility quality and operational performance.
To ensure all its facilities meet benchmark levels of quality for patient experience and operational and facility performance, Spectrum Health’s facilities team developed a prescriptive-based facility assessment tool. Using the tool, they score their facilities on everything from the quality of the furnishings to the distance a patient walks from the parking lot. Photo: Justin Maconochie
No other building sector is more keenly focused on the performance and continual assessment and improvement of its buildings than healthcare. This emphasis on quality will be further emphasized with the coming implementation of the Affordable Care Act, which is expected to place heavy pressure on healthcare providers to take a cleaver, not a surgical knife, to operating costs. That means outpatient care centers will have to deliver more care—and higher-quality care—at less cost.
“There’s no doubt that physician groups are more closely analyzing how to turn over the outpatient exam rooms,” says Brian McFarlane, AIA, Principal in HKS’s Healthcare Group, in Dallas, who leads the firm’s healthcare business development. Already, outpatient clients are using kiosks for check-ins, and they’re administering injections outside of exam rooms to eliminate bottlenecks in patient flow and speed up turnover of exam rooms.
“Less time in exam rooms may mean fewer rooms required or less square footage, which means lower rent for each physician, operational savings, and increased revenue. It’s real money,” he says. “The perfect situation is when a patient parks the car, walks in the door, quickly checks in via kiosk or in person, and goes directly to an exam room.”
What, then, does this heightened emphasis on quality and proof of performance mean for Building Teams working on outpatient facilities?
You can expect greater scrutiny of the quality of your work, especially as it pertains to the efficiency, flexibility, and profitability—not to mention the patient experience—of outpatient facilities. Physical mockups and computer simulations are great, but the end product must perform up to expectations and be able to flex as the client’s needs change.
To help assess the design and performance of its buildings, Spectrum Health’s facilities team, assisted by Integrated Architecture’s Kranzo, created a prescriptive-based facility assessment tool that scores everything from the patient’s experience as they approach and enter the facility, to the quality of the work environment for physicians and staff, to the performance of both the operations and the building itself.
Typical questions: Is the reception area clearly visible immediately upon entering the building? Are there landscaped areas at or near the entry? Are there preferred views from and natural light in 75% of the hospitality area? How visible is the exterior signage from the primary access road? How effective are the primary landmark elements in wayfinding? What is the quality of the furnishings?
Kranzo says his team created the scorecard in an effort to develop facilities that are as balanced as possible across the multiple categories. The prescriptive criteria were developed based on evaluations of three recently renovated ambulatory centers, and were used to inform the design of the new Holland facility.
“It really came out of us trying to measure the quality of a design as part of our final approval process of a construction document,” says Kranzo. “We’re not going to focus just on the facility performance. We’re going to rate operational efficiency as well as the experiential side for the patients and staff.”
Before Kranzo signs off on a CD for new construction or a renovation, a design must achieve a certain score level. Most elements are scored using a plus-three, minus-three system, allowing for gradations and some interpretation.
The goal, says Kranzo, is to “have zeros across the board.” This ensures that no single element is drastically underdesigned or overdesigned. “We found that some facilities go overboard in certain areas, such as finishes being well beyond what we need,” he says. “This standard works to balance everything. That then feeds how we utilize our capital and budget on a given project.”
In a somewhat unusual move for a healthcare facility, Spectrum Health placed the physician and administrative workspaces along the perimeter of the structure, thus providing staff with the best daylight and views for completing medical documentation and reports. Photo: Justin Maconochie
[pagebreak]
4. Anticipate greater pressure from clients for you to deliver ‘affordable elegance.’
To keep costs to a minimum and deliver what the client termed “affordable elegance,” the Building Team for the Everett Clinic’s new Smokey Point (Wash.) Medical Center—ZGF Architects (designer), Coughlin Porter Lundeen (structural engineer), Affiliated Engineers (MEP engineer), and J.R. Abbott Construction (GC)—used tilt-up concrete for the shell of the structure. The move saved an estimated $160,000 in construction and material costs. Photo: Benjamin Benschneider
As if delivering highly efficient, flexible, and patient-focused facilities wasn’t difficult enough, Building Teams can look forward to having clients up the ante on exterior and interior architecture schemes. As healthcare institutions and physician groups compete for outpatient business, they’re increasingly leaning on their facilities to help attract and retain both patients and employees, while keeping budgets tight for designing and constructing outpatient facilities.
To deliver world-class facilities on constrained budgets, Building Teams are getting creative in the selection of materials, finishes, and construction methods.
Take, for example, the Everett Clinic’s new Smokey Point (Wash.) Medical Center. The two-story, 60,000-sf facility was built for around $200/sf—“a budget that is unheard of for this building type,” says Anita Rossen, Senior Healthcare Interior Designer with ZGF Architects, the project’s architect. “Because they are physician-owned, cost was a huge factor. The term their CEO used throughout the design and planning process was ‘affordable elegance.’”
Rossen says the Building Team, which included contractor J.R. Abbott Construction, Seattle, MEP engineer Affiliated Engineers, Chicago, and structural engineer Coughlin Porter Lundeen, Seattle, identified dozens of alternative design and construction approaches and materials and finishes that resulted in more than $350,000 in upfront savings.
The most startling of these was the use of tilt-up concrete construction for the shell of the structure—a construction method that is more popularly associated with big-box stores and warehouses than modern healthcare facilities. The move saved an estimated $160,000 in construction and material costs, according to Michael Sloane, LEED GA, Project Engineer with J.R. Abbott.
“Tilt-panel construction reduced the number of trades involved in the exterior skin, which reduced the number of costly handoffs or transitions,” says Sloane. “It also reduced the number of layers on the exterior from five to two.” That means no metal studs, sheathing, or vapor barrier; just the concrete panel and insulation. Sloane says going with tilt-up saved $8/sf over traditional masonry wall construction.
But how to break up the massing so that the building wouldn’t look like a boxy warehouse? That was the problem before the design team. “We wanted it to feel extremely inviting—a healthcare facility that you would actually want to go to for care,” says Rossen.
To break up the box, the team varied roofline angles and introduced glass curtain wall, storefront windows, wood and metal accents, and vertical reveals in the concrete panels.
To create the “inviting” interior, Rossen says the team brought the concrete panel reveals and exposed wood elements inside to complete the custom, modern look.
Several other “affordable elegance” measures were employed on the project, including the use of mostly off-the-shelf floor tile that was installed in a staggered pattern in the main entry area and stairway for a custom aesthetic; wood-pattern vinyl flooring in lieu of more costly flooring products; and naturally finished local western red cedar instead of hardwoods like ipe or teak.
These are the kinds of low-cost, value-added solutions Building Teams are going to have to provide if they expect to succeed in the outpatient facility market.
To break up the massing of the tilt-up concrete box, the design team incorporated wood and metal accents and vertical reveals in the concrete panels. Using tilt-up cut the number of layers in the building envelope from five to two, thereby saving $8/sf over traditional masonry construction. Photo: Benjamin Benschneider
[pagebreak]
5. Watch for healthcare providers to put you on a ‘Lean’ diet.
Exposed wood elements were also used in the interior of the Everett Clinic project to create a warm, modern design aesthetic. Photo: Benjamin Benschneider
A growing number of healthcare organizations are turning to so-called Lean principles as a means to increase efficiencies and reduce cost in their day-to-day operations. The core tenets of Lean dictate that organizations identify and remove all waste in their products, services, and processes––everything from lengthy waiting times for patients, to excessive costs for supplies and equipment, to unnecessarily long walking distances for clinicians and staff. Implementing Lean operations can involve mapping and evaluating thousands, if not hundreds of thousands, of processes for continual improvement.
Because the design, construction, operation, and maintenance of facilities all play a major role in these Lean efforts, healthcare clients will be looking to their Building Teams to take part in their Lean efforts on new construction projects. This requires a deeper level of team collaboration much earlier in the planning process than some AEC firms may be accustomed to. In some cases, it may be the client’s first foray into applying Lean principles toward facilities construction, thus adding yet another level of difficultly for you to deal with.
“We’re seeing that across the board for projects in our area,” says Rossen. “Healthcare groups that have implemented Lean in their operations are now using it to drive the design and construction on their new facilities. And we’re at that moment in history where most clients haven’t done this before for a new building.”
As a result, clients are relying on their AEC firms to facilitate the Lean process for the project, so be prepared to know your stuff. This may include facilitating integrated design events and building full-scale mockups to get input not only from your Building Team partners but also from patients, staff, and facility operations professionals. And if the client is not fully committed to Lean, expect a rocky road, says Rossen.
“We get RFPs all the time that ask about how much Lean experience we have and if we can facilitate the process,” she says. “You want the clients to own the process and be fully committed to it.”
There is also the potential for conflict between Lean and evidence-based design. “Lean requires a highly flexible environment,” says Rossen. “So how do you create a high degree of flexibility while maintaining the healing qualities of evidence-based design?”
For example, applying Lean principles in an outpatient clinic could mean having no cabinets on the wall––all exam-room supplies would have to be housed in a mobile cart, and all clinician tools would be out in the open. Such an arrangement could be considered a violation of EBD principles.
To solve this conundrum, the Building Team on the Smokey Point Medical Center specified integrated systems furniture with a mix of demountable partitions and tables and chairs that makes it easy to reconfigure exam room spaces.
The same approach was applied in the main lobby, where the front desk and check-in areas use demountable partitions and systems furniture instead of permanent construction. “The trick is to make it not look like a workstation that was designed for an office building,” says Rossen.
Related Stories
Architects | May 2, 2024
Emerging considerations in inclusive design
Design elements that consider a diverse population of users make lives better. When it comes to wayfinding, some factors will remain consistent—including accessibility and legibility.
K-12 Schools | Apr 30, 2024
Fully electric Oregon elementary school aims for resilience with microgrid design
The River Grove Elementary School in Oregon was designed for net-zero carbon and resiliency to seismic events, storms, and wildfire. The roughly 82,000-sf school in a Portland suburb will feature a microgrid—a small-scale power grid that operates independently from the area’s electric grid.
AEC Tech | Apr 30, 2024
Lack of organizational readiness is biggest hurdle to artificial intelligence adoption
Managers of companies in the industrial sector, including construction, have bought the hype of artificial intelligence (AI) as a transformative technology, but their organizations are not ready to realize its promise, according to research from IFS, a global cloud enterprise software company. An IFS survey of 1,700 senior decision-makers found that 84% of executives anticipate massive organizational benefits from AI.
Codes and Standards | Apr 30, 2024
Updated document details methods of testing fenestration for exterior walls
The Fenestration and Glazing Industry Alliance (FGIA) updated a document serving a recommended practice for determining test methodology for laboratory and field testing of exterior wall systems. The document pertains to products covered by an AAMA standard such as curtain walls, storefronts, window walls, and sloped glazing. AAMA 501-24, Methods of Test for Exterior Walls was last updated in 2015.
MFPRO+ News | Apr 29, 2024
World’s largest 3D printer could create entire neighborhoods
The University of Maine recently unveiled the world’s largest 3D printer said to be able to create entire neighborhoods. The machine is four times larger than a preceding model that was first tested in 2019. The older model was used to create a 600 sf single-family home made of recyclable wood fiber and bio-resin materials.
K-12 Schools | Apr 29, 2024
Tomorrow's classrooms: Designing schools for the digital age
In a world where technology’s rapid pace has reshaped how we live, work, and communicate, it should be no surprise that it’s also changing the PreK-12 education landscape.
Adaptive Reuse | Apr 29, 2024
6 characteristics of a successful adaptive reuse conversion
In the continuous battle against housing shortages and the surplus of vacant buildings, developers are turning their attention to the viability of adaptive reuse for their properties.
AEC Innovators | Apr 26, 2024
National Institute of Building Sciences announces Building Innovation 2024 schedule
The National Institute of Building Sciences is hosting its annual Building Innovation conference, May 22-24 at the Capital Hilton in Washington, D.C. BI2024 brings together everyone who impacts the built environment: government agencies, contractors, the private sector, architects, scientists, and more.
Mass Timber | Apr 25, 2024
Bjarke Ingels Group designs a mass timber cube structure for the University of Kansas
Bjarke Ingels Group (BIG) and executive architect BNIM have unveiled their design for a new mass timber cube structure called the Makers’ KUbe for the University of Kansas School of Architecture & Design. A six-story, 50,000-sf building for learning and collaboration, the light-filled KUbe will house studio and teaching space, 3D-printing and robotic labs, and a ground-level cafe, all organized around a central core.
Sports and Recreational Facilities | Apr 25, 2024
How pools can positively affect communities
Clark Nexsen senior architects Jennifer Heintz and Dorothea Schulz discuss how pools can create jobs, break down barriers, and create opportunities within communities.
