flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

7 must reads for the AEC industry today: June 30, 2020

Codes and Standards

7 must reads for the AEC industry today: June 30, 2020

Affordable housing comes to the Bay Area and this is not the end of cities.


By BD+C Editors | June 30, 2020


1. New affordable housing development comes to the Bay Area (BD+C)
"The two phase project will provide 100 affordable units total."

2. Mandated building retrofits are necessary to meet climate crisis (BD+C)
"
Cities and states should mandate retrofits of inefficient buildings in order to meet the climate crisis, according to a new report by the American Council for an Energy-Efficient Economy (ACEEE)."

3. 11 tips on how best to install EV charging stations in multifamily housing (BD+C) 
"
Electric vehicle adoption is expected to grow at a 25% annual clip over next five years. That’s going to make the installation of electric charging stations a must at apartment communities in most major real estate markets."

4. New buildings can fall short of designed performance (BD+C)
"New buildings don’t always perform as designed due to many variables. Energy loads and when the loads peak can vary no matter the design, and similar buildings can produce far different energy usage outcomes."

5. This is not the end of cities (Bloomberg)
"Both the coronavirus pandemic and the Black Lives Matter movement create opportunities to reshape cities in more equitable ways."

6. Will pre-COVID-19 senior housing trends help fuel a post-pandemic recovery? (GlobeSt)
"The JLL Spring 2020 Senior Housing and Care Investor Survey and Trends Outlook reports that potential market disruptors are active adult developments and the needs of middle-income seniors."

7. A multibillion-dollar opportunity: Virus-proofing the new office (New York Times)
"Tech, catering and design companies are rushing to sell employers on fever scanners, box lunches and office floor-planning apps for social distancing. But it’s too soon to tell if they will work."


Related Stories

| May 3, 2012

Green-roof requirement now includes industrial facilities in Toronto

A mandate that requires installation of green roofs on new commercial and residential buildings in Toronto has been expanded to include industrial facilities.

| May 3, 2012

Innovative wastewater treatment helps achieve LEED rating

LEED for New Construction, Neighborhood Development and the LEED Volume Program offer some ways to achieve LEED points when dealing with wastewater treatment.

| Apr 26, 2012

Lack of bolts on steel support caused collapse at Cincinnati casino

Too few bolts connecting horizontal steel support beams with vertical steel columns was the cause of January’s construction accident at Horseshoe Casino Cincinnati, according to the report of the Occupational Safety and Health Administration.

| Apr 26, 2012

OSHA criticized for taking too long to roll out safety rules

The Occupational Safety and Health Administration takes far too long to adopt new safety regulations compared to other agencies’ development of rules, safety experts said during a Senate hearing.

| Apr 26, 2012

Contractors fear that GSA scandal will lead to fewer federal construction contracts

In the wake of the recent scandal at the General Services Administration in which workers spent lavishly at a Las Vegas conference, a spokesman for Associated General Contractors of America said contractors are worried the scandal will result in cuts to GSA's construction and renovation budgets.

| Apr 26, 2012

Developers can use LEED wastewater credits to help gain approvals in environmentally sensitive locales

Those wanting to pursue development in heavily regulated and environmentally sensitive areas are benefiting by designing projects that qualify for LEED points, even if the project as a whole does not achieve certification.

| Apr 26, 2012

New York City Council moves to license elevator mechanics

New York’s City Council introduced a measure last week that would require the city’s 7,000 elevator mechanics to meet national standards and be licensed by the city.

| Apr 23, 2012

AAMA releases updated specification for anodized aluminum

AAMA 611-12 describes test procedures and requirements for high performance (Class I) and commercial (Class II) architectural quality aluminum oxide coatings applied to aluminum extrusions and panels for architectural products.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021