flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

AAMA updates methods for testing of exterior walls

Codes and Standards

AAMA updates methods for testing of exterior walls

The standard specifies test methods, specifications, and field checks to evaluate structural adequacy of exterior wall systems composed of curtain walls, storefronts, and sloped glazing.


By Peter Fabris, Contributing Editor | August 6, 2015
AAMA updates methods for testing of exterior walls

Photo: Tim1965/Creative Commons

The American Architectural Manufacturers Association (AAMA) has released an updated document specifying test methods, specifications, and field checks used to evaluate the structural adequacy of wall systems and their ability to resist water penetration and air leakage. Other optional tests are also included. 

AAMA 501-15 is intended to be referenced in laboratory and field testing methods for exterior wall systems composed of curtain walls, storefronts, and sloped glazing. It was previously updated in 2005.

According to José Colon (Architectural Testing), Chair of the AAMA 501 Update Task Group, the standard was recently updated to make sure all labs and product manufacturers are on the same page with procedures and with pass/fail criteria for certain parts of the standard. These document updates also take into consideration new technologies for equipment being used for testing.

“Historically, AAMA 501 has been the base standard for project specific test requirements,” says Colon. “More and more specifications are being written that are even longer than what is called out in AAMA 501.” This is especially the case in places with more detailed codes, like Miami-Dade County or the state of Florida in general, said Colon.

Related Stories

Sustainability | May 1, 2023

Increased focus on sustainability is good for business and attracting employees

A recent study, 2023 State of Design & Make by software developer Autodesk, contains some interesting takeaways for the design and construction industry. Respondents to a survey of industry leaders from the architecture, engineering, construction, product design, manufacturing, and entertainment spheres strongly support the idea that improving their organization’s sustainability practices is good for business.

Office Buildings | May 1, 2023

Office building owners face potential legal liabilities when adding new workplace amenities

Many landlords in the war for tenants have turned to offering new amenities such as conference room services, fitness centers with nutritionists, and high-end food and beverage offerings. To provide new services, landlords often engage with third-party vendors, which can present thorny legal liability.

Codes and Standards | May 1, 2023

Hurricane Ian aftermath expected to prompt building code reform in Florida

Hurricane Ian struck the Southwest Florida coastline last fall with winds exceeding 150 mph, flooding cities, and devastating structures across the state. A construction risk management expert believes the projected economic damage, as high as $75 billion, will prompt the state to beef up building codes and reform land use rules. 

Codes and Standards | Apr 21, 2023

Federal court overturns first natural gas ban in the U.S.

A recent ruling by the Ninth U.S. Circuit Court of Appeals in San Francisco invalidating Berkeley, California’s ban on natural gas within new building construction puts similar measures adopted around the country in legal jeopardy.

Codes and Standards | Apr 21, 2023

Sixteen-year-old climate law not having intended impact on decarbonizing federal buildings

Sixteen years out from a 2007 law that aimed to end the use of fossil fuels in federal buildings, gas heat is still being installed within the federal sphere.

Green | Apr 21, 2023

Boston to adopt stringent climate-friendly building code

Boston will soon adopt a new stringent green state building code that aims to significantly reduce carbon emissions in new construction and major renovations.

Multifamily Housing | Apr 21, 2023

Arlington County, Va., eliminates single-family-only zoning

Arlington County, a Washington, D.C., community that took shape in the 1950s, when single-family homes were the rule in suburbia, recently became one of the first locations on the East Coast to eliminate single-family-only zoning.

Contractors | Apr 18, 2023

New York City construction fatalities, injuries rise in 2022 as activity booms

New York City’s construction fatalities rose from nine in 2021 to eleven in 2022, according to a report by the New York City Department of Buildings. Recorded injuries also rose to 554 last year after leveling off in 2020 and 2021.

Resiliency | Apr 18, 2023

AI-simulated hurricanes could aid in designing more resilient buildings

Researchers at the National Institute of Standards and Technology (NIST) have devised a new method of digitally simulating hurricanes in an effort to create more resilient buildings. A recent study asserts that the simulations can accurately represent the trajectory and wind speeds of a collection of actual storms. 

Green | Apr 18, 2023

USGBC and IWBI unveil streamlined certification pathway for LEED and WELL green building programs

The U.S. Green Building Council, Green Business Certification Inc., and the International WELL Building Institute released a streamlined process for projects pursuing certifications for the LEED green building rating system and the WELL Building Standard. The new protocol simplifies documentation for projects that are pursuing both certifications at the same time or that have already earned one certification and are looking to add the other. 

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021