The 2018 Jury of Fellows from the American Institute of Architects (AIA) elevated 152 member-architects to its prestigious College of Fellows, an honor awarded to members who have made significant contributions to the architecture profession. The fellows will be honored at a ceremony on June 22 at the AIA Conference on Architecture 2018 in New York City.
The fellowship program was developed to elevate those architects who have achieved a standard of excellence in the profession and made a significant contribution to architecture and society on a national level. Prospective candidates must have at least 10 years of AIA membership and demonstrated influence in at least one of the following categories:
- Promoted the aesthetic, scientific, and practical efficiency of the profession;
- Advanced the science and art of planning and building by advancing the standards of architectural education, training or practice;
- Coordinated the building industry and the profession of architecture through leadership in the AIA or other related professional organizations; or
- Advanced the living standards of people through an improved environment.
The stringent requirements result in only three percent of the AIA’s more than 91,000 members being recognized as fellows. Currently, there are 3,425 living fellows globally.
Fellows are selected by a seven-member Jury of Fellows. This year’s jury included Karen Nichols, FAIA (Chair), Michael Graves Architecture & Design; Peter Bardwell, FAIA, Bardwell + Associates, LLC; Mary A. Burke, FAIA, Burke Design and Architecture PLLC; Philip Castillo, FAIA, JAHN; Mary P. Cox, FAIA, Virginia Commonwealth University; Paul Mankins, FAIA, Substance architecture and David Messersmith, FAIA, University of Texas.
The newly elevated members and their AIA component affiliations are listed below.
Edward H. Adelman Boston Society of Architects/AIA
Jennifer Aliber Boston Society of Architects/AIA
Joseph J. Aliotta AIA New York Chapter
Joseph M. Antunovich AIA Chicago
Dror Baldinger AIA San Antonio
Jay Bargmann AIA New York Chapter
Alan Barlis AIA New York Chapter
Jonathan Barnes AIA Columbus
Larry Barr AIA Washington DC
Denise M. Berger AIA New York Chapter
Andrew Bernheimer AIA New York Chapter
Randall J. Biallas AIA Washington DC
Kiki Bolender AIA Philadelphia
Craig Borum AIA Huron Valley
Gerald Warren Briggs AIA Washington DC
Eric Bunge AIA New York Chapter
Gregory John Burke AIA Treasure Coast
Mary Burnham AIA New York Chapter
Nathan R. Butler AIA Orlando
Robert Calvani AIA Albuquerque
Pablo Castro AIA New York Chapter
Vishaan Chakrabarti AIA New York Chapter
Katherine Kai-sun Chia AIA New York Chapter
David J. Chilinski Boston Society of Architects/AIA
Leigh Christy AIA Los Angeles
Jonah Cohen AIA Portland
Jose R. Coleman-Davis Pagan AIA Puerto Rico
Chris Cooper AIA New York Chapter
Stuart L. Coppedge AIA Colorado South
Joseph Coppola AIA New York Chapter
Joseph Coriaty AIA Los Angeles
Bernard Costantino AIA Columbus
Andrew M. Cupples AIA Los Angeles
William (Griff) Davenport AIA Minneapolis
Jules Dingle AIA Philadelphia
Martine Dion Boston Society of Architects/AIA
Wendy Dunnam Tita AIA Austin
Craig Dykers AIA New York Chapter
Tamara Eagle Bull AIA Lincoln
Aimee Eckmann AIA Chicago
Rand Ekman AIA Chicago
Glenn Fellows AIA Albuquerque
Joshua Flowers AIA Memphis
Viviana Frank-Franco AIA Lower Rio Grande Valley
Anna Franz AIA Washington DC
Verity L. Frizzell AIA Jersey Shore
R David Frum AIA Seattle
William B. Gallagher Jr. AIA Washington DC
Donald F Gatzke AIA Fort Worth
Brian George AIA Dallas
Rocco Giannetti AIA New York Chapter
Joann Gonchar AIA New York Chapter
F. Eric Goshow AIA New York Chapter
Dina A. Griffin AIA Chicago
Timothy J. Griffin AIA St. Paul
Jacquelyn Hale AIA Orlando
Melody Harclerode AIA Atlanta
Kristine A. Harding AIA North Alabama
Laura Hartman AIA East Bay
Cynthia Hayward AIA Huron Valley
Laura Heim AIA New York Chapter
Mark C. Hirons AIA Chicago
James House AIA Los Angeles
Zena K. Howard AIA Triangle
Jonathan Humble AIA Connecticut
David J. Insinga AIA Washington DC
Mark Jensen AIA San Francisco
Pamela Jerome AIA New York Chapter
Bruce Johnson AIA Asheville
Leonard Kady AIA New York Chapter
Bernhard Karpf AIA New York Chapter
Arlan Kay AIA Southwest Wisconsin
James H. Kolker AIA St. Louis
Matthew Kreilich AIA Minneapolis
Lee Ledbetter AIA New Orleans
Mindy Lehrman Cameron AIA Seattle
Thomas Leslie AIA Iowa
David Leven AIA New York Chapter
Ismael Leyva AIA New York Chapter
Brian J Mac AIA Vermont
Emily Marthinsen AIA East Bay
Don H. May AIA Albuquerque
Ronnie McGhee AIA Washington DC
Samuel Miller AIA Seattle
Adrienne Montare AIA Columbia
Suzanne Napier AIA San Francisco
James A. Nicolow AIA Southwest Michigan
Christopher Noll AIA San Francisco
Samuel Óghale Oboh AIA Canada
Sean O'Donnell AIA Washington DC
Joyce Owens AIA Florida Southwest
Haril Pandya Boston Society of Architects/AIA
Wendy Pautz AIA Seattle
Frederick (Rick) Petersen AIA Denver
Donna Phaneuf AIA Hampton Roads
Naomi Pollock AIA Japan
Kenneth Radtkey AIA Santa Barbara
Sharon Refvem AIA Santa Clara Valley
David W. Robinson AIA Houston
J. Todd Robinson AIA Middle Tennessee
Candid Rogers AIA San Antonio
Zigmund Rubel AIA San Francisco
Wolf Saar AIA Seattle
Patricia Saldaña Natke AIA Chicago
Tania S Salgado AIA Denver
John Lynch Sanders AIA East Tennessee
Thomas Savory AIA Columbia
Clemens Bruns Schaub AIA Treasure Coast
Edwin Schmidt AIA Northern Virginia
Charles L. Schreckenberger AIA Akron
John M. Sellery AIA Hong Kong
Nick Serfass AIA Richmond
Stephen L. Sharp AIA Dayton
Brian Shea AIA New York Chapter
Christopher N. Shears AIA Denver
Rosa Sheng AIA San Francisco
Troy Sherrard AIA Columbus
Lloyd Sigal AIA Buffalo/Western New York
George C. Skarmeas AIA Philadelphia
Charles Davis Smith AIA Dallas
Z. Smith AIA New Orleans
Traci Dawn Sooter AIA Springfield
Jonathan Scott Sparer AIA Las Vegas
Robert Steele AIA Richmond
Carrie Strickland AIA Portland
Dean Strombom AIA Houston
James Susman AIA Austin
Robert J. Svedberg AIA Atlanta
Karen Hargarther Thomas AIA Seattle
Kermit Duncan Thompson AIA Connecticut
Henry Tom AIA Southern Arizona
Ronald J. Tomasso AIA Washington DC
Eric Tomich AIA San Francisco
Sean Towne AIA San Diego
Edward Tucker AIA West Virginia
Bryan Turner AIA Utah
Grant Uhlir AIA Chicago
David Urschel AIA Chicago
Peter F. Vieira, Jr. Boston Society of Architects/AIA
Lois Vitt Sale AIA Northeast Illinois
Ingalill Wahlroos-Ritter AIA Los Angeles
David E. Wark AIA Portland
Louis Wasserman AIA Milwaukee
Angela E. Watson Boston Society of Architects/AIA
Ellen Watts Boston Society of Architects/AIA
David West AIA New York Chapter
Paul Whalen AIA New York Chapter
Stephen Wierzbowski AIA Chicago
Graham S. Wyatt AIA New York Chapter
Mark Yoes AIA New York Chapter
Steve Ziger AIA Baltimore
Dawn Zuber AIA Huron Valley
2018 Honorary Fellows
Two honorary fellows were also elevated this year by the 2018 Jury of Fellows in conjunction with the 2018 Jury of Honorary Fellows. The Honorary Fellows of the Institute was developed as the international counterpart to the fellowship program. It recognizes the achievements of foreign architects as individuals and also elevates before the global public and the profession, model architects who have significantly contributed to the profession on an international level. This year’s honorary fellows are:
Taro Ashihara , Taro Ashihara Architects , Tokyo, Japan
Sathirut Nui Tandanand, Dhevanand Co. Ltd., Bangkok, Thailand
This year’s Jury of Honorary Fellows included Ric Bell, FAIA (Chair), New York City Dept. of Design & Construction; Peter Bardwell, FAIA, Bardwell + Associates, LLC; Mary A. Burke, FAIA, Burke Design and Architecture PLLC; Philip Castillo, FAIA, JAHN; Mary P. Cox, FAIA, Virginia Commonwealth University; Lester Korzilius, FAIA, EllisWilliams Architects; Paul Mankins, FAIA, Substance architecture; David Messersmith, FAIA, University of Texas and Karen Nichols, FAIA, Michael Graves Architecture & Design.
Related Stories
| Jan 4, 2011
Product of the Week: Zinc cladding helps border crossing blend in with surroundings
Zinc panels provide natural-looking, durable cladding for an administrative building and toll canopies at the newly expanded Queenstown Plaza U.S.-Canada border crossing at the Niagara Gorge. Toronto’s Moriyama & Teshima Architects chose the zinc alloy panels for their ability to blend with the structures’ scenic surroundings, as well as for their low maintenance and sustainable qualities. The structures incorporate 14,000 sf of Rheinzink’s branded Angled Standing Seam and Reveal Panels in graphite gray.
| Jan 4, 2011
6 green building trends to watch in 2011
According to a report by New York-based JWT Intelligence, there are six key green building trends to watch in 2011, including: 3D printing, biomimicry, and more transparent and accurate green claims.
| Jan 4, 2011
LEED standards under fire in NYC
This year, for the first time, owners of 25,000 commercial properties in New York must report their buildings’ energy use to the city. However, LEED doesn’t measure energy use and costs, something a growing number of engineers, architects, and landlords insist must be done. Their concerns and a general blossoming of environmental awareness have spawned a host of rating systems that could test LEED’s dominance.
| Jan 4, 2011
LEED 2012: 10 changes you should know about
The USGBC is beginning its review and planning for the next version of LEED—LEED 2012. The draft version of LEED 2012 is currently in the first of at least two public comment periods, and it’s important to take a look at proposed changes to see the direction USGBC is taking, the plans they have for LEED, and—most importantly—how they affect you.
| Jan 4, 2011
California buildings: now even more efficient
New buildings in California must now be more sustainable under the state’s Green Building Standards Code, which took effect with the new year. CALGreen, the first statewide green building code in the country, requires new buildings to be more energy efficient, use less water, and emit fewer pollutants, among many other requirements. And they have the potential to affect LEED ratings.
| Jan 4, 2011
New Years resolutions for architects, urban planners, and real estate developers
Roger K. Lewis, an architect and a professor emeritus of architecture at the University of Maryland, writes in the Washington Post about New Years resolutions he proposes for anyone involved in influencing buildings and cities. Among his proposals: recycle and reuse aging or obsolete buildings instead of demolishing them; amend or eliminate out-of-date, obstructive, and overly complex zoning ordinances; and make all city and suburban streets safe for cyclists and pedestrians.
| Jan 4, 2011
An official bargain, White House loses $79 million in property value
One of the most famous office buildings in the world—and the official the residence of the President of the United States—is now worth only $251.6 million. At the top of the housing boom, the 132-room complex was valued at $331.5 million (still sounds like a bargain), according to Zillow, the online real estate marketplace. That reflects a decline in property value of about 24%.
| Jan 4, 2011
Luxury hotel planned for Palace of Versailles
Want to spend the night at the Palace of Versailles? The Hotel du Grand Controle, a 1680s mansion built on palace grounds for the king's treasurer and vacant since the French Revolution, will soon be turned into a luxury hotel. Versailles is partnering with Belgian hotel company Ivy International to restore the dilapidated estate into a 23-room luxury hotel. Guests can live like a king or queen for a while—and keep their heads.
| Jan 4, 2011
Grubb & Ellis predicts commercial real estate recovery
Grubb & Ellis Company, a leading real estate services and investment firm, released its 2011 Real Estate Forecast, which foresees the start of a slow recovery in the leasing market for all property types in the coming year.
| Jan 4, 2011
Furniture Sustainability Standard - Approved by ANSI and Released for Distribution
BIFMA International recently announced formal American National Standards Institute (ANSI) approval and release of the ANSI/BIFMA e3-2010 Furniture Sustainability Standard. The e3 standard represents a structured methodology to evaluate the "sustainable" attributes of furniture products and constitutes the technical criteria of the level product certification program.
