The American Concrete Institute, through the work of ACI Committee 506, has released ACI PRC-506-22: Shotcrete—Guide. The newly introduced guide provides information on materials and properties of both dry-mix and wet-mix shotcrete and covers most facets of the shotcrete process including application procedures, equipment requirements, and responsibilities of the shotcrete crew.
As a companion document to ACI SPEC-506.2: Specification for Shotcrete, the Guide also discusses preconstruction trials, craftsman qualification tests, materials tests, finished shotcrete acceptance tests, and equipment.
The document is written such that the numbering of all sections between the Guide and Specification documents are aligned, allowing ACI PRC-506-22 to serve as a non-mandatory commentary on the mandatory specification provisions.
“The newly revised ACI PRC-506-22: Shotcrete—Guide is an excellent primer for anyone interested in learning more about shotcrete materials, equipment, crews, placement techniques, curing, and protection,” commented Simon Reny, current Chair of ACI Committee 506. “The guide also details the benefits of shotcrete placement’s inherently improved sustainability. “
ACI Committee 506’s mission is to develop and report information on the use of shotcrete. Committee 506 has written and maintains several guides, materials, specifications, reports, and technical notes on the use of shotcrete in structural concrete applications. The main goal of Committee 506 is to develop better guidance for the acceptance of shotcrete on projects.
Related Stories
| Sep 24, 2012
Reed Construction completes Lafarge headquarters in Chicago
Reed Construction was contracted to complete the full third floor build-out which included the construction of new open area work space, private offices, four conference rooms with videoconferencing capabilities and an executive conference boardroom.
| Aug 30, 2012
Holcim (US) announces new Deputy Chief Executive Officer
Ruiz began his career with the Holcim Group in 1986 as electrical supervisor with Holcim Apasco, Mexico, later becoming plant manager.
| Jun 6, 2012
SOM urges Chicago tenants to partner with landlords to cut energy use
Tenants can exceed building energy challenge targets recently announced by Mayor Emanuel.
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
| Jun 1, 2012
AIA 2030 Commitment Program reports new results
The full report contains participating firm demographics, energy reduction initiatives undertaken by firms, anecdotal accounts, and lessons learned.
| Jun 1, 2012
New York City Department of Buildings approves 3D BIM site safety plans
3D BIM site safety plans enable building inspectors to take virtual tours of construction projects and review them in real-time on site.
| May 30, 2012
Construction milestone reached for $1B expansion of San Diego International Airport
Components of the $9-million structural concrete construction phase included a 700-foot-long, below-grade baggage-handling tunnel; metal decks covered in poured-in-place concrete; slab-on-grade for the new terminal; and 10 exterior architectural columns––each 56-feet tall and erected at a 14-degree angle.
| May 29, 2012
Reconstruction Awards Entry Information
Download a PDF of the Entry Information at the bottom of this page.
| May 24, 2012
2012 Reconstruction Awards Entry Form
Download a PDF of the Entry Form at the bottom of this page.
