flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Architecture firm Perkins&Will to deliver ‘carbon forecasts’ for clients

Codes and Standards

Architecture firm Perkins&Will to deliver ‘carbon forecasts’ for clients

 

Perkins&Will aims to mitigate buildings’ environmental impact through this new initiative.


By Peter Fabris, Contributing Editor | April 28, 2022
Architecture firm Perkins & Will to deliver ‘carbon forecasts’ for clients
Graphic: Perkins & Will

Global architecture firm Perkins & Will says it will issue its clients a “carbon forecast” for their projects.

This tool is an effort to “facilitate measurable and meaningful carbon reduction in the built environment,” according to a news release. Carbon forecasts will help clients understand their projects’ carbon emissions, and the impact of those emissions on human and environmental health, at the earliest stages of design.

The forecasts will include information on building design, construction, and operation (known as whole-life-carbon). And, importantly, they will identify steps clients and project teams can take to reduce those emissions.

The forecasts will include options on how to reduce operational carbon through passive design, minimization of energy loads, optimization of systems, disconnection from unclean fuel sources, and integration of renewable energy. Measures for realizing maximum reductions in embodied carbon will be offered.

In addition, the firm will provide opportunities for enabling circular design that can minimize material waste, maximize material reuse, and optimize environments for material health.

Related Stories

Codes and Standards | Mar 7, 2017

Canada’s national building codes will encompass effects of climate change

Forecasted data, not historical data, will be used as the basis for the codes.

Codes and Standards | Mar 6, 2017

ConsensusDocs updates standard short contract editions

The updates address industry changes impacting insurance, legal, technology, and terminology.

Codes and Standards | Mar 3, 2017

ASCE updates standard for structures using tensile membrane

The new sstandard combines guidelines for conventional tensile membrane structures with frame-covered membrane structures.

Codes and Standards | Mar 1, 2017

EPA's 2017 Construction General Permit now in effect

The regulation governs compliance with effluent limits.

Codes and Standards | Feb 28, 2017

Concern grows for high tide flood vulnerability in Mid-Atlantic states

Washington, D.C., and Annapolis, Md., could flood every three days by 2045.

Codes and Standards | Feb 27, 2017

Green building saves operating costs and boosts asset value

A new report shows 14% cost savings and a 7% increase in value when green standards are met.

Codes and Standards | Feb 24, 2017

Scant data hampering energy, water efficiency at sports venues

New NIBS report says baseline information needs further development.

Codes and Standards | Feb 22, 2017

Plans for WELL Building Standard include linkage with other green building standards

The planned updated version will be customizable for any building type.

Codes and Standards | Feb 21, 2017

Aging building code inspectors and government belt-tightening could cause crisis

Inspectors are edging toward retirement with no understudies in place.

Codes and Standards | Feb 20, 2017

AISI publishes three new cold-formed steel framing research reports

Seismic simulation, roof trusses, steel-to-steel and sheathing-to-steel connections are examined in the reports.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021