flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE, USGBC, IES consider biomass requirements in green building standard

Codes and Standards

ASHRAE, USGBC, IES consider biomass requirements in green building standard

The proposal would add biomass to approved renewables.


By Peter Fabris, Contributing Editor | February 12, 2015
ASHRAE, USGBC, IES consider biomass requirements in green building standard

The proposal defines biomass as organic material, such as wood and crop waste, that can be burned to generate thermal energy. Photo: Kapilbutani via Wikimedia Commons

ASHRAE, the U.S. Green Building Council, and the Illuminating Engineering Society are exploring the development of biomass requirements for inclusion in their co-sponsored green building standard.

ASHRAE/IES/USGBC Standard 189.1, Standard for the Design of High Performance Green Buildings, contains requirements for the use of renewable energy systems such as solar, wind, and geothermal. The Standard 189.1 Committee recently considered a proposal to add biomass to the definition of renewable energy systems.

The proposal defines biomass as organic material, such as wood and crop waste, that can be burned to generate thermal energy. At ASHRAE’s recently held 2015 Winter Conference, the committee voted not to accept the proposal to simply add the word biomass to this definition. But the committee said that it intends to work on a definition of biomass as well as requirements on the use of biomass.

The standard currently has no restrictions on biomass as an energy source. However, it does not allow it to be used to meet the renewable energy requirements.

Related Stories

Codes and Standards | May 13, 2020

Researchers flag insufficient training for construction workers on healthcare projects

May contribute to fungal disease outbreaks that endanger patients

Codes and Standards | May 8, 2020

New NIBS report evaluates natural disaster mitigation strategies

Document examines strengthening buildings for flood, wind, wildfires, and earthquakes.

Codes and Standards | May 6, 2020

A few ways contractors can manage COVID-19 risks

Staggered start times, rigorous tool cleaning, virtual training among the strategies.

Codes and Standards | May 5, 2020

NAHB loses influence in 2021 IECC building code development

Despite objections from the National Association of Home Builders (NAHB), the development of the 2021 International Energy Conservation Code (IECC) is nearing conclusion. NAHB objected to several more stringent energy efficiency provisions.

Codes and Standards | May 5, 2020

2020 IECC will lead to significant carbon emissions reductions

New model building code nearly finalized.

Codes and Standards | May 4, 2020

New York expands prevailing wage law

Now includes private projects with 30% or more of public subsidies.

Codes and Standards | May 1, 2020

OSHA says most employers don’t have to track worker COVID-19 infections

Agency clarifies responsibility for contractors, others.

Codes and Standards | Apr 29, 2020

New York City tightens restrictions on construction during pandemic

Dept. of Buildings has issued more than 100 violations and stop-work orders.

Codes and Standards | Apr 28, 2020

ASHRAE, WELL panels to tackle revising standards to limit spread of viruses in buildings

Will examine ways to reduce infectious threats through building designs and operations.

Codes and Standards | Apr 24, 2020

Dept. of Labor issues guidance for respiratory protection during N95 shortage

Elastomeric respirators or powered, air-purifying respirators, and expired N95s are allowable alternatives

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021