flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE, WELL panels to tackle revising standards to limit spread of viruses in buildings

Codes and Standards

ASHRAE, WELL panels to tackle revising standards to limit spread of viruses in buildings

Will examine ways to reduce infectious threats through building designs and operations.


By Peter Fabris, Contributing Editor | April 28, 2020

Courtesy Pixabay

Both ASHRAE and the International WELL Building Institute have formed panels to address how building standards could limit the spread of viruses such as COVID-19 in buildings.

ASHRAE recently formed a committee to update advice and standards that address viral infections in buildings. The task force will recommend shifts in operational practices and design standards to ensure that buildings limit the spread of pathogens, according to an ASHRAE news release.

The task force is designed to serve as a clearinghouse to handle questions as they come in, to review research and to develop guidance. In addition to guidance and position papers, the task force’s work may lead to changes in ASHRAE standards, including 62.1 (non-residential ventilation), 62.2 (residential ventilation), 55 (thermal comfort), and 170 (healthcare ventilation).

WELL’s task force will examine ways to address infectious threats through building designs, operations, and standards. Among the possibilities are changes to incentives for ventilation and air filters and incorporation of antimicrobial surfaces.

Related Stories

| Feb 9, 2012

Rapid growth of zero energy buildings expected

Much of that growth will be in the European Union, where near-zero energy buildings are mandated by 2019 for public buildings, and by 2021 for all construction.

| Feb 9, 2012

Stiffer OSHA fines put strain on Kansas contractors

A fine for a violation that once cost between $750 and $1,200 now runs $7,000 or more per incident, according to a state industry association official.

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

A Construction Specifications Institute webinar will focus on the lessons learned through the design and construction of a LEED-certified industrial project, Better Living Mill Shop, the first industrial building in Central Virginia to earn LEED certification.

| Feb 8, 2012

California likely to eliminate redevelopment agencies

Leaders of California cities had been trying to fashion a compromise with lawmakers after the state Supreme Court ruled the state had the authority to eliminate the agencies and use their property tax money for local services.

| Feb 8, 2012

Project aimed at economical seismic retrofits on historic Memphis structures

The group will develop a low-cost seismic retrofit model that would benefit aging brick-and-mortar structures. It involves bolting steel brackets to existing wooden floor and ceiling joists.

| Feb 8, 2012

Houston signs on to Better Buildings Challenge

The challenge has about $4 billion in federal and private-sector funds, which it will use for building energy upgrades nationwide in the next two years.

| Feb 8, 2012

OSHA offers free health and safety consulting for small businesses

The consultants offer confidential, non-punitive advice.

| Feb 8, 2012

Controversy over pay for prisoners on roofing job in Michigan

The disagreement was over whether the prisoners should have been paid prevailing wage for their brief time on the job because the project was paid for with a U.S. Department of Energy grant.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021