flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

ASHRAE/IES energy standard could become more applicable for global use

ASHRAE/IES energy standard could become more applicable for global use

Proposed addendum updates climate data and adds a climate zone


December 18, 2014

A proposed addendum to ANSI/ASHRAE/IES Standard 90.1-2013, Energy Standard for Buildings Except Low-Rise Residential Buildings would make the standard more applicable for use around the world.

The addendum was developed in response to an update of ASHRAE Standard 169-2013, Climatic Data for Building Design Standards, which now contains updated climate data and adds Climate Zone 0 with humid (0A) and dry (0B) zones. This has global implications for the standard, as Climate Zone 0 does not exist in the United States and is primarily used in the equatorial regions of South America, Africa, Middle East, southern Asia, and the south Pacific.

“It gives the standard more of an international view with maps and data never before available to users,” Dru Crawley, chair of the Standard 169 committee, said. “Previously there was the single U.S. map. Now there are high-level (1 deg latitude/longitude) maps of the world, covering each continent and major countries.”

This and other addenda are open for public review from Dec. 5, 2014, until Jan. 4, 2015.

(https://www.ashrae.org/news/2014/ashrae-ies-proposes-expansion-of-climate-zones-for-energy-standard)

Related Stories

| Dec 15, 2011

Dayton, Ohio schools saving $2.6 million annually by building to LEED

On average, green schools save about $100,000 a year on operating costs, including energy and water savings.

| Dec 15, 2011

Building to LEED standards can pose new risks for construction workers

Workers on these projects suffer a 24% increase in falls to lower levels during roof work, which researchers attributed to the installation of solar panels, and a few other risks.

| Dec 15, 2011

NRDC charges Maine governor with weakening green wood requirement

The FSC program is administered through the Leadership in Energy and Environmental Design (LEED) and requires wood to be harvested in a sustainable way.

| Dec 15, 2011

Post-tornado, Tuscaloosa seeks to create walkable urban, retail areas

Block sizes initially were limited to a maximum perimeter of 1,750 feet, with no side of the block being longer than 500 feet.

| Dec 15, 2011

Allentown, Pa. city council asked to repeal union-friendly law

The mayor of Allentown, Pa. asked the City Council to repeal a year-old ordinance that forces contractors to hire union workers for large city projects funded with state and federal dollars.

| Dec 13, 2011

LEED-EB outpaces LEED for new construction

The U.S. Green Building Council's (USGBC's) LEED certifications for existing buildings standard is outpacing LEED for new buildings for the first time.

| Dec 13, 2011

Regulators charge pervasive abuse of construction workers in Connecticut

Federal and state regulators say they have uncovered what they call "widespread noncompliance" with minimum wage and overtime laws in Connecticut's construction industry.

| Dec 13, 2011

Philadelphia mayor signs order for project labor agreements

Philadelphia Mayor Michael Nutter signed an executive order establishing project labor agreements for major public works projects in Philadelphia.

| Dec 13, 2011

Improved code requirements for attic ventilation

The Roof Assembly Ventilation Coalition (RAVC) participated in the development of the code.

| Dec 12, 2011

LEED-EB Outpaces LEED for New Construction

The U.S. Green Building Council’s (USGBC’s) LEED certifications for existing buildings standard is outpacing LEED for new buildings for the first time.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021