flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Challenges in arctic, subarctic regions subject of new ASHRAE guide

Building Materials

Challenges in arctic, subarctic regions subject of new ASHRAE guide

Cold, remoteness, limited utilities, and permafrost addressed.


By Peter Fabris, Contributing Editor | October 16, 2015
ASHRAE released a guide on how to deal with designing, operating and maintaining buildings in cold climates

ASHRAE released a guide on how to deal with designing, operating and maintaining buildings in cold climates. Photo: John W. Iwanski/Creative Commons.

Buildings in arctic and subarctic climates face cold, remoteness, limited utilities, permafrost, and extreme temperature shifts.

Meeting these challenges while keeping occupants comfortable and minimizing environmental impact creates difficulties for designers. “Cold-Climate Buildings Design Guide” from ASHRAE provides information on the issues commonly faced in these climates.

Tips for designing, operating and maintaining buildings and systems in cold climates from the guide include:

  • The colder the climate, the more important it is for critical equipment to be sheltered – you can’t expect service personnel to properly repair HVAC equipment in a winter blizzard.
  • In extreme climates, windblown snow takes on a consistency similar to sand and requires special design techniques to keep it from getting into HVAC intakes.
  • A building envelope must address all modes of heat loss to be truly efficient; ignoring any mode of loss may lead to excessive thermal transfer.
  • Design out cold bridges in both building fabric and engineering penetrations.
  • Avoid or minimize any external service pipe runs.
  • Provide safe access to roof mechanical plants in all weathers – frozen roof surfaces can be a hazard.
  • Locate air inlets and exhausts in locations that avoid snow drift and blockage.

Related Stories

BD+C University Course | May 24, 2018

Accommodating movement in building envelope materials [AIA course]

We may think of the building envelope as an inanimate object, but in reality its components can be quite mobile. This AIA CES course is worth 1.0 AIA LU/HSW.

Sponsored | | Feb 28, 2018

Quality Products Needed To Meet Green Building Standards Today

Sustainable healthcare facilities will need energy-efficient building enclosures from the outset.

Sponsored | | Feb 15, 2018

Fact vs. fiction: Hotel waterproofing in coastal zones

Sign up for our free March 6 webinar on “A Project Peer Review: The Single Most Important Factor in Reducing the Risk of a Mold and Moisture Lawsuit in Your Next Project”.

Building Materials | Dec 19, 2017

‘Ultra Violet’ is Pantone’s Color of the Year 2018

The color represents a symbol of counterculture, unconventionality, and artistic brilliance, according to Pantone.

Sponsored | Building Materials | Aug 24, 2017

Controlling condensation

No matter what structural material you build with, be it steel, concrete, or wood, water is the enemy.  

Sponsored | Building Materials | Aug 17, 2017

Teflon’s little brother is breathing new life into big design

Lighter than glass and 100% recyclable, one material takes center stage in the future of building.

Concrete | Jul 7, 2017

The secrets held within Ancient Roman concrete could improve future building practices

Not only has the concrete stood the test of time, but it has actually become stronger.

boombox1
boombox2
native1

More In Category


Brick and Masonry

A journey through masonry reclad litigation

This blog post by Walter P Moore's Mallory Buckley, RRO, PE, BECxP + CxA+BE, and Bob Hancock, MBA, JD, of Munsch Hardt Kopf & Harr PC, explains the importance of documentation, correspondence between parties, and supporting the claims for a Plaintiff-party, while facilitating continuous use of the facility, on construction litigation projects.



Glass and Glazing

The next generation of thermal glazing: How improving U-value can yield energy savings and reduce carbon emissions

The standards for energy-efficient construction and design have been raised. Due to the development of advanced low-e coatings for the interior surface and vacuum insulating technologies, architects now have more choices to improve U-values wherever enhanced thermal performance is needed to create eco-friendly spaces. These options can double or even triple thermal performance, resulting in annual energy savings and a positive return on carbon.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021