flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Cornell Tech unveils plans to reach Net Zero at The Bloomberg Center

Codes and Standards

Cornell Tech unveils plans to reach Net Zero at The Bloomberg Center

Campus plans include photovoltaic arrays and geothermal ground source heat pumps.


By Peter Fabris, Contributing Editor | June 15, 2017

Pixabay Public Domain

Cornell Tech, under construction on Roosevelt Island in New York City, recently announced details of its plan to achieve Net Zero energy efficiency for The Bloomberg Center.

Designed by the architecture firm Morphosis, The Bloomberg Center is the first academic building to be constructed on the Cornell Tech campus. The first phase of this development will open this September.

The campus plans include photovoltaic arrays, geothermal ground source heat pumps, an energy-efficient facade balancing the ratio between transparency and opaqueness to maximize building insulation and decrease energy demand, and smart building features that will monitor lighting and plug load use. The strategy to achieve a low energy building is through a stepped approach, prioritizing reduction in energy demand through load reductions and maximizing passive and energy efficient design, as well as using renewable energy to power the building systems.

There are 80 closed-loop geothermal wells, each 400 feet deep, that were drilled below the main campus public open space. The ground-source heat pumps will be used with an active chilled-beam system.

An acre-sized photovoltaic array tops The Bloomberg Center and neighboring The Bridge building. The building designs incorporate the panels as an integral architectural feature. The array on The Bloomberg Center also provides building shading.

Related Stories

Codes and Standards | Feb 16, 2016

New York City implements new crane safety plan following deadly accident

The plan includes restrictions on crawler cranes during windy conditions.

Resiliency | Feb 16, 2016

Obama establishes federal earthquake risk management standard

The standard requires federal agencies to use earthquake-resistant design provisions in current building codes.

Codes and Standards | Feb 12, 2016

Huge fraud case involving alleged engineering impostors uncovered in California

Hundreds of buildings may have to be demolished.  

Codes and Standards | Feb 11, 2016

New York governor makes emergency design-build authorization

The declaration was issued in response to Winter Storm Jonas which dumped over 18 inches of snow in parts of the state.

Green | Jan 29, 2016

USGBC names top 10 states for LEED green building

Illinois leads the list for the third straight year.

Codes and Standards | Jan 25, 2016

Dept. of Energy releases decision guides for plug and process loads

Plug and process loads consume about 30% of the primary energy in U.S. commercial buildings today.

Codes and Standards | Jan 22, 2016

ConsensusDocs releases new multi-party IPD agreement and joining agreement

The documents serve as a comprehensive revision of previous IPD agreement

Codes and Standards | Jan 22, 2016

State Savings Calculator analyzes savings associated with energy codes

The calculator breaks down the cost-effectiveness of energy codes on a state-by-state basis.

Codes and Standards | Jan 22, 2016

Metal Roofing Seaming Guide published by Metal Construction Association

The free document is specifically tailored for metal roof installation.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021