flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Elevator shafts a major source of heat loss in New York City

Codes and Standards

Elevator shafts a major source of heat loss in New York City

A typical New York apartment building loses thousands of dollars worth of energy every year from leaky elevator shafts that vent warm air at the top of the building and draw in cold air at the bottom, according to a new Urban Green Council report.


By Peter Fabris, Contributing Editor | March 29, 2015
Elevator shafts a major source of heat loss in New York City

The report, “Spending Through the Roof,” says that apartment building owners pay an average of $3,400 a year to replace heat lost through the roof. In taller buildings, the cost can be more than $20,000 a year. Illustration: Urban Green Council 

New York City should focus on elevator shafts to improve the energy efficiency standards of its high-rise residences, according to a new report from the Urban Green Council.

A typical New York apartment building loses thousands of dollars worth of energy every year from leaky elevator shafts that vent warm air at the top of the building and draw in cold air at the bottom.

The report, “Spending Through the Roof says that apartment building owners pay an average of $3,400 a year to replace heat lost through the roof. In taller buildings, the cost can be more than $20,000 a year.

Plugging this type of air leak can cost from $500 to $15,000. If the leaks were plugged on 4,000 tall apartment buildings in the city, landlords would collectively save $11 million a year, while keeping 30,000 metric tons of greenhouse gases out of the atmosphere.

Elevator shafts and stairwell openings were required to vent smoke in the case of fire. But construction practices and firefighting techniques have changed, so the vents now "are needlessly open all the time."

Codes governing stairwell vents haven't changed since 1929 so there's no legal way now for building owners to fix the problem. 

Tags

Related Stories

Codes and Standards | Aug 22, 2019

5G expected to give a boost to construction technology

Virtual reality, Internet of Things, robotics, and drones will all benefit from enhanced data flows.

Codes and Standards | Aug 15, 2019

New edition of Building Code Requirements for Structural Concrete available

American Concrete Institute document includes major technical changes.

Codes and Standards | Aug 13, 2019

Coaching pays off for new managers

Study finds increased engagement and readiness for new roles.

Codes and Standards | Aug 12, 2019

New curtain wall design guidelines released

AAMA document includes mandatory language, optional language, and detailed technical commentary.

Codes and Standards | Aug 9, 2019

Cities modify density zoning to spur more affordable housing projects

Solutions include eliminating single-family zoning and allowing taller apartments in higher-density zones.

Codes and Standards | Aug 8, 2019

More designers focusing on acoustic properties of buildings

Recognition that structures should be acoustically satisfying.

Codes and Standards | Aug 6, 2019

New technology, aligning training with local trends among keys to workforce development

Construction industry must also invest in training, recruiting high school students.

Codes and Standards | Aug 1, 2019

Planners, city official rethink parking requirements on new projects

Reducing number of parking spots frees up land for ‘more purposeful’ uses.

Codes and Standards | Jul 31, 2019

USGBC-LA chooses first ‘Net Zero Accelerator’ technologies

Wide range of solutions address numerous environmental challenges.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021