The Fenestration and Glazing Industry Alliance (FGIA) has updated a technical document intended to aid in the selection, use, and application of sealants commonly used in fenestration systems. AAMA 851, “Fenestration Sealants Guide for Windows, Window Walls and Curtain Walls,” an FGIA standard, is the first update to this document that was originally published in 2009.
“AAMA 851 is an excellent resource in helping identify areas of consideration when selecting sealant systems,” said Steve Altum (Dow Performance Silicones), chair of the Fenestration Sealant Application Guide Task Group, in a news release. “Choosing the right sealant system for the right application is critical to building or manufacturing products that can meet today’s industry standards and requirements.”
“While the individual manufacturer of sealant choice should always be consulted for specific performance attributes, this guide will help to identify some of the key considerations such as substrates, environmental, joint movements, and compatibility of components used in the overall system design,” Altum said. “It will be especially insightful for those new to the industry.”
The updated document reviews the type of sealants currently in use and their application following accepted standard practices. It encompasses both field and factory applications.
Related Stories
| Feb 9, 2012
Rapid growth of zero energy buildings expected
Much of that growth will be in the European Union, where near-zero energy buildings are mandated by 2019 for public buildings, and by 2021 for all construction.
| Feb 9, 2012
Stiffer OSHA fines put strain on Kansas contractors
A fine for a violation that once cost between $750 and $1,200 now runs $7,000 or more per incident, according to a state industry association official.
| Feb 9, 2012
Webinar focuses on lessons learned from LEED-certified industrial project
A Construction Specifications Institute webinar will focus on the lessons learned through the design and construction of a LEED-certified industrial project, Better Living Mill Shop, the first industrial building in Central Virginia to earn LEED certification.
| Feb 8, 2012
California likely to eliminate redevelopment agencies
Leaders of California cities had been trying to fashion a compromise with lawmakers after the state Supreme Court ruled the state had the authority to eliminate the agencies and use their property tax money for local services.
| Feb 8, 2012
Project aimed at economical seismic retrofits on historic Memphis structures
The group will develop a low-cost seismic retrofit model that would benefit aging brick-and-mortar structures. It involves bolting steel brackets to existing wooden floor and ceiling joists.
| Feb 8, 2012
Houston signs on to Better Buildings Challenge
The challenge has about $4 billion in federal and private-sector funds, which it will use for building energy upgrades nationwide in the next two years.
| Feb 8, 2012
OSHA offers free health and safety consulting for small businesses
The consultants offer confidential, non-punitive advice.
| Feb 8, 2012
Controversy over pay for prisoners on roofing job in Michigan
The disagreement was over whether the prisoners should have been paid prevailing wage for their brief time on the job because the project was paid for with a U.S. Department of Energy grant.
