flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Fenestration Alliance updates liquid applied flashing standard

Standards

Fenestration Alliance updates liquid applied flashing standard

The standard sets minimum performance and durability requirements for liquid applied flashing.


By Peter Fabris, Contributing Editor | January 19, 2023
After Congressional resistance, federal agency head says no plans to ban gas stoves
Image courtesy Fenestration and Glazing Industry Alliance

The Fenestration and Glazing Industry Alliance (FGIA) published an update to its Liquid Applied Flashing Standard.

The document contains minimum performance requirements for liquid applied flashing used to provide water-resistive seals around exterior wall openings in buildings. This includes fenestration products such as windows and doors, as well as other through-wall penetrations.

“Liquid applied flashing products are realizing increasing application for sealing building interfaces, including flashing around windows and doors,” said Jim Katsaros, chair of the FGIA Flashing Committee. “These products offer many performance advantages, including outstanding adhesion to a wide variety of substrates, ultimate conformability for complex geometries and, in many cases, vapor permeable water-resistant seals.”

The standard is referenced in both the IRC and IBC Codes as a requirement for the use of these materials in window and door flashing applications.

Related Stories

Codes and Standards | Aug 29, 2019

Industry leaders ask for government help as trades shortage worsens

AGC asks for more funding for education and increased immigration to fill gaps.

Codes and Standards | Aug 29, 2019

Code-conforming wood design guide available

The guide summarizes provisions for the use of wood and wood products in the 2018 IBC.

Codes and Standards | Aug 29, 2019

LEED residential market up 19% since 2017

The U.S. Green Building Council says that the LEED residential market has grown 19% since 2017. Nearly 500,000 single family, multifamily, and affordable housing units have been certified globally.

Codes and Standards | Aug 27, 2019

Slower speed limits in urban areas offer multiple benefits

Improved safety, better adoption of electric scooters and autonomous vehicles are possible if drivers ease off the accelerator.

Codes and Standards | Aug 27, 2019

Oregon rescinds tsunami-zone construction ban

Other states have no ban, but have strengthened building codes for tidal wave resilience.

Urban Planning | Aug 27, 2019

Pop-up parks revitalize empty lots

Pop-up parks that provide instant open areas for public use and programming can revitalize under-utilized spaces and add vibrancy to neighborhoods. 

Codes and Standards | Jul 15, 2019

USGBC calls for proposals for feedback, concepts for next LEED version

The move follows successful public input on LEED 4.1.

AEC Tech | Jul 15, 2019

Lack of standards hampers development of exoskeleton industry

Guidelines, common terminology, and testing methodology are needed, says expert. 

Concrete | Jul 8, 2019

Concrete repair code requirements released

American Concrete Institute offers guidance on assessment, repair, rehab of existing concrete structures.

boombox1
boombox2
native1

More In Category


Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021