flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

First mass timber panel made from structural composite lumber gets APA certification

Codes and Standards

First mass timber panel made from structural composite lumber gets APA certification

Said to be much more cost effective than CLT options.


By Peter Fabris, Contributing Editor | August 21, 2018

Freres Lumber Company says it has achieved Mass Plywood Panels (MPP) certification under the APA - The Engineered Wood Association's ANSI/APA PRG 320 standard.

The product is the first Mass Timber Panel constructed entirely out of Structural Composite Lumber (SCL) worldwide, making it much more cost effective than CLT (cross-laminated timber) options, according to a Freres news release. Mass Timber Panels will allow rapid construction of multi-story structures with pre-fabricated structural wood panels, the release says.

The predictable char rate of mass timber panels allows buildings to be built taller with wood, allowing multi-story structures out of wood up to 18 stories anticipated in the next iteration of the International Building Code (IBC). Wood structures carry a smaller carbon footprint, provide greater sustainability, faster construction with less waste and are an economically favorable construction method compared to concrete and steel, Freres says.

The company says it is continuing to refine the design values of the product line, and will roll out additional MPP product configurations.

Related Stories

| Feb 9, 2012

Rapid growth of zero energy buildings expected

Much of that growth will be in the European Union, where near-zero energy buildings are mandated by 2019 for public buildings, and by 2021 for all construction.

| Feb 9, 2012

Stiffer OSHA fines put strain on Kansas contractors

A fine for a violation that once cost between $750 and $1,200 now runs $7,000 or more per incident, according to a state industry association official.

| Feb 9, 2012

Webinar focuses on lessons learned from LEED-certified industrial project

A Construction Specifications Institute webinar will focus on the lessons learned through the design and construction of a LEED-certified industrial project, Better Living Mill Shop, the first industrial building in Central Virginia to earn LEED certification.

| Feb 8, 2012

California likely to eliminate redevelopment agencies

Leaders of California cities had been trying to fashion a compromise with lawmakers after the state Supreme Court ruled the state had the authority to eliminate the agencies and use their property tax money for local services.

| Feb 8, 2012

Project aimed at economical seismic retrofits on historic Memphis structures

The group will develop a low-cost seismic retrofit model that would benefit aging brick-and-mortar structures. It involves bolting steel brackets to existing wooden floor and ceiling joists.

| Feb 8, 2012

Houston signs on to Better Buildings Challenge

The challenge has about $4 billion in federal and private-sector funds, which it will use for building energy upgrades nationwide in the next two years.

| Feb 8, 2012

OSHA offers free health and safety consulting for small businesses

The consultants offer confidential, non-punitive advice.

| Feb 8, 2012

Controversy over pay for prisoners on roofing job in Michigan

The disagreement was over whether the prisoners should have been paid prevailing wage for their brief time on the job because the project was paid for with a U.S. Department of Energy grant.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021