flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Group proposes Carbon Use Intensity metric for new buildings

Codes and Standards

Group proposes Carbon Use Intensity metric for new buildings

Plan would track embedded carbon on projects.


By Peter Fabris, Contributing Editor | September 22, 2021
buildings

Courtesy Pixabay

Builders for Climate Action, a Canadian advocacy group, has proposed the development of a Carbon Use Intensity metric for new buildings.

The plan would measure embodied carbon in building products to include in an overall assessment of a building’s carbon footprint. The group says that choosing building materials with low levels of embodied carbon can have a larger impact on climate change than focusing solely on energy efficiency.

The Carbon Use Intensity metric would combine the impact of operational carbon, embodied carbon, and carbon intensity of the local electric grid. The broader approach is necessary to ensure that Canada’s progress toward carbon neutrality doesn’t stall, the group says.

Researchers found that houses built to more stringent energy standards may have higher levels of embedded carbon because they usually have more insulation in them. Thicker layers of insulation such as closed-cell polyurethane foam can add a significant amount of carbon in the building.

Related Stories

Codes and Standards | Feb 2, 2022

Public works contracting reform advances in New York State

Governor signs bill to form advisory council that will propose policy changes.

Codes and Standards | Feb 2, 2022

Commercial and multifamily construction starts rebounded in 2021

Following COVID uncertainty in 2020, the industry recovered, but still lags 2019 levels.

Codes and Standards | Feb 1, 2022

Biden Administration launches state, local coalition to boost building performance standards

Will focus on energy efficiency and electrification across the buildings sector.

Codes and Standards | Jan 26, 2022

Downtown digital twin to aid Las Vegas in setting policy priorities

Will be used to address energy use, emissions, traffic, parking, noise, and emergency management.

Codes and Standards | Jan 25, 2022

Modeling tool helps compare options for HVAC systems when little known about a building

Compares projected costs and energy usage for all HVAC systems and hot water consumption.

Codes and Standards | Jan 25, 2022

Critics slam proposed revamp of California’s solar net energy metering rate

Could make rooftop solar panels unaffordable for most customers.

Sponsored | Resiliency | Jan 24, 2022

Norshield Products Fortify Critical NYC Infrastructure

New York City has two very large buildings dedicated to answering the 911 calls of its five boroughs. With more than 11 million emergency calls annually, it makes perfect sense. The second of these buildings, the Public Safety Answering Center II (PSAC II) is located on a nine-acre parcel of land in the Bronx. It’s an imposing 450,000 square-foot structure—a 240-foot-wide by 240-foot-tall cube. The gleaming aluminum cube risesthe equivalent of 24 stories from behind a grassy berm, projecting the unlikely impression that it might actually be floating. Like most visually striking structures, the building has drawn as much scorn as it has admiration. 

Codes and Standards | Jan 24, 2022

N.Y. governor calls for ban on natural gas in new buildings

Action follows New York City’s ban.

Codes and Standards | Jan 19, 2022

EPA may expand product lineup that can earn WaterSense label

Would include systems that enhance water quality at the tap.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021