flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Hoboken, N.J.’s street design policies are saving lives

Codes and Standards

Hoboken, N.J.’s street design policies are saving lives

Curb extensions, bike lanes, speed limit reduction have helped the city achieve zero pedestrian deaths since 2017.


By Peter Fabris, Contributing Editor | November 27, 2023
Image by Deepali Kale from Pixabay - Curb extensions, bike lanes, speed limit reduction have helped the city achieve zero pedestrian deaths since 2017.
Image by Deepali Kale from Pixabay

Transportation policies enacted in Hoboken, N.J. over the past several years are paying off in the form of fewer pedestrian deaths and injuries.

The city has adopted daylighting, bike lanes, lower speed limits, and intersection redesigns to make its roads safer. The citywide speed limit was reduced to 20 miles per hour. Crosswalks have been painted and repaved to make it easier for drivers to see them. More than 40 curb extensions have been installed to direct cars farther from intersections. Bike lanes now grace about half of Hoboken’s roads.

The mayor says that a bucket of paint enables the city to create a curb extension and high visibility crosswalks to realize a much safer environment at a modest cost. The measures taken by Hoboken have resulted in no traffic death since January 2017, with injuries falling 41%. This safer environment occurred while pedestrian deaths in the U.S. reach 40-year highs.

Daylighting, implementing measures that prevent cars parking at the corner of an intersection, has been a key strategy. This initiative was realized with bump outs—extensions of sidewalks or the creation of small rain gardens in lieu of additional pavement, or the addition of bike racks or bollards.

Related Stories

| Nov 26, 2014

Colorado must fix construction defects law, Denver Post says

Colorado's “vexing construction defects law” has hampered the building of new condominiums in the state, according to an editorial in the Denver Post.

| Nov 26, 2014

Cheyenne, Wyoming City Council kills downtown design standards proposal

The Cheyenne, Wyoming City Council voted down a measure that would have implemented design standards for new construction and building additions downtown.

| Nov 26, 2014

ASTM International develops first product category rules for asphalt roofing industry

The Asphalt Roofing Manufacturers Association (ARMA) and ASTM International have developed Product Category Rules (PCR) for asphalt roofing in North America.

| Nov 26, 2014

International Green Construction Code will include option for outcome-based approach

The outcome-based approach requires the building owner to provide the building’s utility bills for a 12-month period within three years. 

| Nov 20, 2014

Pentagon is reviewing hospital construction standards

An independent review panel of military specialists met with healthcare leaders Nov. 12 to consider whether construction standards for medical centers should be strengthened to align with industry best practices.

| Nov 20, 2014

ConsensusDocs releases first standard agreement for commissioning contracting

The new standard contract provides a contractual vehicle for owners to save significant money from operation and maintenance costs regarding energy performance.

| Nov 20, 2014

Revamped zoning is transforming several New Jersey downtowns

The zoning policy shift could produce the biggest transformation of North New Jersey’s downtowns since the arrival of malls pulled shoppers away from town centers in the 1960s and 1970s.

| Nov 20, 2014

ANSI approves 2015 Wood-Frame Construction Manual standard

The American Wood Council's 2015 “Wood-Frame Construction Manual for One- and Two-Family Dwellings” (WFCM ) has been approved as an American National Standard by the American National Standards Institute (ANSI).

| Nov 17, 2014

AAMA releases new blast hazard mitigation specifications for vertical fenestration systems

This document provides a guide for manufacturers, architects/specifiers, contractors, and building owners for specifying types of systems and services to meet the requirements of blast hazard mitigation.

| Nov 17, 2014

National Roofing Contractors Assn. offers guide for LEED v4 provisions

National Roofing Contractors Association has released LEED v4: Roofing-related Provisions, a document that examines the roofing-related provisions of LEED v4.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021