The Appropriations Committee of the U.S. House of Representative voted to cut about $3 billion from the military construction budget for FY 2015 when compared to FY 2014 funding levels.
The Army would see the sharpest cuts on a percentage basis, with a $578 million, or 52% reduction in FY 2015. However, a provision in the bill provides the Army, Army National Guard, and Army Reserve Accounts an additional $245 million for use and disbursement at the discretion of the Secretary of the Army.
The Naval Facilities Engineering Command (NAVFAC) program, encompassed in the Navy and Marine account, would see a $631 million, or 39%, cut in FY 2015.
The Veteran’s Administration, also impacted by this budget proposal, would be funded at the same level as in FY 2014 ($1.057 billion). The funds for FY 2015 would be evenly split between the two primary VA construction accounts.
The VA’s Major Construction Account—for projects over $10 million—would increase from $342 million in FY 2014 to $561 million in FY 2015. The Minor Construction Account—for projects below $10 million—would decrease from $714 million to $495 million.
The House bill figures are identical to the president’s FY 2015 budget request.
(http://news.agc.org/2014/04/25/house-panel-approves-fy-2015-milconva-funding/)
Related Stories
| Mar 19, 2014
Santa Monica, Calif., may offer LEED alternatives to help promote green construction
With developers in Santa Monica, Calif., looking for ways to build green more inexpensively, the city may consider alternatives to LEED such as Green Globes.
| Mar 18, 2014
Canadian wood industry pushes for ‘wood first’ legislation on mid-rise public projects
The wood lobby is pushing Canadian provinces to pass “wood first” legislation specifying wood framed structures as the default for mid-rise public works projects where warranted.
| Mar 13, 2014
USGBC hits back at Environmental Policy Alliance criticism
The Washington, D.C.-based Environmental Policy Alliance has launched a campaign to make the claim that LEED-certified buildings are less energy efficient than other buildings. In response, USGBC told its members: "Don’t be fooled, the Environmental Policy Alliance isn’t the 'EPA' you might think."
| Mar 13, 2014
North Carolina board recommends switch to six-year code update cycle
In a nine to six vote, the North Carolina State Building Code Council on March 11 approved moving the commercial building code (except for the electrical code) to a six-year cycle for updating instead of a three-year cycle.
| Mar 13, 2014
OSHA’s funding disclosure requirement for those offering silica rule comments draws ire
The Occupational Safety and Health Administration is requiring those who submit comments on the silica rule to disclose their funding sources for their scientific research to avoid conflict of interest.
| Mar 13, 2014
EPA publishes ‘best management practices’ rule on erosion, stormwater at construction sites
The Environmental Protection Agency published a new rule this month that will require the construction, housing, and utility sectors to carry out "best management practices" in order to prevent erosion and harmful stormwater discharges at construction sites.
| Mar 5, 2014
San Francisco board seeks remedies to code enforcement complaints
Two supervisors charged that a lack of adequate code enforcement has led to blight from dilapidated or unfinished buildings.
| Mar 5, 2014
Obama proposes $1 billion for climate change risk mitigation
President Barack Obama would spend $1 billion to “better understand the projected impacts of climate change,” encourage local action to reduce future risk, and fund technology and infrastructure that will be more resilient to climate change.
| Mar 5, 2014
Southern Forest Products Assn. revamps pressure-treated pine specifications
It provides information to assist with the proper specification and use of pressure-treated Southern Pine materials.
| Mar 5, 2014
UL, PRI Construction Materials Technologies reach product certification agreement
Underwriters Laboratories (UL) Inc. reached an agreement with PRI Construction Materials Technologies LLC (PRI) through which PRI will participate in UL's "Data Acceptance Program," enabling the acceptance of data generated at PRI toward UL product certification.
