flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

IAPMO advances toward new 2017 Water Efficiency and Sanitation Standard

Codes and Standards

IAPMO advances toward new 2017 Water Efficiency and Sanitation Standard

Revised pipe-sizing method for residential applications will be included.


By Peter Fabris, Contributing Editor | June 7, 2017

Pixabay Public Domain

The International Association of Plumbing and Mechanical Officials (IAPMO) recently held a technical committee meeting to address public comments on a new water efficiency and sanitation standard.

When published later this year, WE•Stand will be the nation’s only American National Standard devoted entirely to plumbing and water efficiency. The technical committee addressed these issues:

  • Improved provisions for indoor water efficiency and landscape irrigation
  • Appropriate permitting and cross-connection prevention requirements for alternate water systems
  • Revisions to water heating design provisions allowing new fitting types that help to mitigate biofilm growth by providing improved scouring action in potable water pipes
  • Inclusion of a revised, statistically based pipe sizing method for residential applications in the appendices that will support the use of a water demand calculator to assist plumbing system designers to more accurately size systems to be consistent with the lower flow rates and consumption values from water efficient plumbing fixtures and appliances

The final technical committee ballot to review public comments on the 2017 WE•Stand will begin on April 17 and conclude on May 15.

Related Stories

Codes and Standards | Feb 26, 2018

Bolstering energy efficiency would produce significant health benefits, ACEEE study says

Reducing energy consumption by 15% would save six lives a day.

Codes and Standards | Feb 22, 2018

GBCI will certify underwriting standard for energy efficiency projects

Investor Ready Energy Efficiency (IREE) certification aims to boost confidence in predicted energy and financial savings.

Codes and Standards | Feb 21, 2018

FEMA document provides simplified seismic design provisions for low-hazard regions

Forty four states have areas defined as low-hazard.

Codes and Standards | Feb 20, 2018

Federal budget includes disaster mitigation provisions

Bipartisan bill encourages states to adopt latest building codes.

Codes and Standards | Feb 19, 2018

Easy access to indoor environment controls yields improved efficiency and workplace productivity

JLL/Purdue University project is developing algorithms to improve indoor comfort.

Codes and Standards | Feb 14, 2018

After Energy Star stopped certifying medical properties, a REIT developed its own certification

Welltower uses internal system to evaluate total building performance.

Codes and Standards | Feb 13, 2018

Rezoning, innovative investor enabling development of a “metroburb” in New Jersey

Indoor mixed-use “Main Street” blossoms in giant former Bell Labs building.

Codes and Standards | Feb 12, 2018

Publication provides insight into managing risk of wind-borne debris damage

Explains how models and data are used to assess the risk of structural damage.

Codes and Standards | Feb 8, 2018

EPA’s Water of the U.S. rule delayed for two years while repeal sought

Controversial Obama-era regulation may never be implemented.

Codes and Standards | Feb 5, 2018

Astrophysicist turns his skills toward identifying and predicting location of vacant buildings

Project could help Baltimore and other cities redevelop blighted properties.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021