The International Association of Plumbing and Mechanical Officials (IAPMO) recently held a technical committee meeting to address public comments on a new water efficiency and sanitation standard.
When published later this year, WE•Stand will be the nation’s only American National Standard devoted entirely to plumbing and water efficiency. The technical committee addressed these issues:
- Improved provisions for indoor water efficiency and landscape irrigation
- Appropriate permitting and cross-connection prevention requirements for alternate water systems
- Revisions to water heating design provisions allowing new fitting types that help to mitigate biofilm growth by providing improved scouring action in potable water pipes
- Inclusion of a revised, statistically based pipe sizing method for residential applications in the appendices that will support the use of a water demand calculator to assist plumbing system designers to more accurately size systems to be consistent with the lower flow rates and consumption values from water efficient plumbing fixtures and appliances
The final technical committee ballot to review public comments on the 2017 WE•Stand will begin on April 17 and conclude on May 15.
Related Stories
| May 9, 2013
New developments would face tougher stormwater rules than redeveloped sites under EPA proposal
New developments would have to meet more stringent stormwater-retention standards than redeveloped sites under a forthcoming Environmental Protection Agency proposal.
| May 9, 2013
Proposed ASHRAE systems manual uniform procedure guideline open for public review
A proposed guideline that will establish a uniform procedure for transmitting design, construction, testing, and operational information to building owners and operators is open for public comment.
| May 9, 2013
Post-tornado Greensburg, Kan., leads world in LEED-certified buildings per capita
Six years after a tornado virtually wiped out the town, Greensburg, Kan., is the world's leading community in LEED-certified buildings per capita.
| May 9, 2013
SMACNA’s new HVAC sound and vibration guide open for public review
Sheet Metal and Air Conditioning Contractors National Association’s (SMACNA’s) new “HVAC Systems Sound and Vibration Guide” is available for a 45-day public review.
| May 9, 2013
NSF Sustainability launches VOC emissions testing, certification for commercial furniture industry
New program offers sustainable certification and indoor air quality testing for commercial furniture makers.
| May 1, 2013
House bill would give OSHA more authority over state workplace-safety plans
A recently introduced U.S. House of Representatives bill would give the Occupational Safety and Health Administration (OSHA) more authority over state workplace-safety plans and toughen penalties for companies that knowingly violate OSHA regulations.
| May 1, 2013
New commercial landlord disclosures go into effect in California in July
Two new landlord disclosure requirements become effective in California on July 1, 2013.
| May 1, 2013
New ASHRAE residential indoor air quality standard adds carbon monoxide alarm requirement
The new 2013 version of ASHRAE’s residential indoor air quality standard adds a requirement for carbon monoxide alarms.
| May 1, 2013
AAMA publishes standard for multipoint locking hardware for side-hinged doors
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
| Apr 24, 2013
‘W visa’ program could hamper construction industry's growth
The Senate’s bipartisan immigration reform proposal will provide interim legal status to some 11 million undocumented people.
