flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Louisiana officials critical of stricter building standards in flood-prone areas

Codes and Standards

Louisiana officials critical of stricter building standards in flood-prone areas

There are concerns that the restrictions are too stringent for southern areas of the state.


By Peter Fabris, Contributing Editor | February 22, 2015
Louisiana officials critical of stricter building standards in flood-prone areas

Photo: David Fine / FEMA via Wikimedia Commons

Louisiana leaders spoke out against an executive order by President Barack Obama that would put stricter building standards on federally financed projects in flood-prone areas.

The new flood-risk management standard requires infrastructure to be built taller or on higher ground to better withstand flooding. Buildings would have to be built either two or three feet above the base flood elevation for a 100-year flood or above the base elevation for a 500-year flood. A project could also be completed under the guidance of the “best-available, actionable climate science.”

Dwayne Bourgeois, executive director of the North Lafourche Levee District, told Houma Today that the regulations might alter local projects that have already started. South Louisiana's low-lying geography is unlike any other in the country, he said, and should be taken into consideration when federal regulations are made.

U.S. Sens. David Vitter, Bill Cassidy and other Republican representatives are questioning the legality of the executive order. A 60-day comment period is under way before the new standard goes into effect.

Related Stories

Codes and Standards | Jul 23, 2020

North Carolina will stop relying on FEMA flood mapping

State will identify flood zones on its own.

Codes and Standards | Jul 22, 2020

New version of IAPMO’s Water Demand Calculator is available

Enhanced features include selection between single- and multifamily buildings.

Codes and Standards | Jul 22, 2020

Mobile app calculates sound transmission for wood-framed assemblies

American Wood Council tool for floor-ceiling assemblies.

Codes and Standards | Jul 22, 2020

Architecture billings remain in negative territory, begin to stabilize

Fewer architecture firms report declining billings this month.

Codes and Standards | Jul 20, 2020

N.Y. construction firm to pay $1.5 million to settle sexual harassment claim

Managers said to demand sex for pay and OT opportunities.

Codes and Standards | Jul 16, 2020

Tips to make optimal use of salvaged materials

Integrated teams, staging warehouse, and looking early and often, among recommendations.

Codes and Standards | Jul 15, 2020

Georgia gives the go-ahead for tall mass timber construction

Standards review scheduled to be completed by July 2021.

Codes and Standards | Jul 15, 2020

Softwood-lumber duties boost expenses amid COVID-19 outbreak

Little hope this year for resolution of trade dispute with Canada.

Codes and Standards | Jul 14, 2020

Metal Construction Assn. releases three EPD updates

Pertain to Metal Composite Materials, Insulated Metal Panels, and Roll Formed Aluminum and Steel Cladding.

Codes and Standards | Jul 13, 2020

5 must reads for the AEC industry today: July 13, 2020

4 technologies for improving building sanitation and tech's ever-evolving impact on the multifamily space.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021