Sometimes it can be tricky to expand your place of business and stay in business at the same time. It helps to have a little extra land, and to choose a fast, efficient metal building system from Star Buildings.
The Norris car dealership is a family-owned business with a nearly half-century tradition serving the city of Titusville, FL. It’s a city that has bounced back from the brink. The local workforce was deeply involved in NASA’s Space Shuttle program, and the city was hard-hit economically when the program ended in 2011, in addition to suffering from the overall economic recession. But things are getting better, and the Norris family thought it was time to re-invest in Titusville.
“Part of the advantage of a family business is that we’re focused on 30 years down the road. That’s part of the reason I wanted to build these buildings,” explains third-generation owner Josh Norris. “This was a ground-up renovation that we thought was important for the future of our three-generation family business. We’re looking forward to 30 or 40 more years of having a facility to serve our community, and how could you predict that times will ever be better to build than right now? Interest rates are low, the economy is going up, and signs are that it will keep going up. It just makes sense.”
Their dealership is a type that is not uncommon in smaller markets: it’s two dealerships – Honda and Buick/GMC in this case – that were sharing a single lot and a service center. The triangular, 6-acre parcel of land actually included multiple buildings, several smaller concrete block structures, and a large metal building that housed the combined showroom. Seventeen service bays were spread out in different structures.
Norris decided to build two metal buildings on the grounds, on the advice of general contractor Rush Construction, and the job went to Star Buildings’ builder, Allegiance Contracting, Inc., located in nearby Melbourne, FL.
Allegiance owner, Jane Lindsey, describes it as a very exciting project for her, because she was directly involved with the architects and the general contractor from the design stage onward.
Lindsey’s involvement was key to getting the project built correctly. “There were issues they were trying to deal with that would be important during construction that I could assist with,” said Lindsey. For example, the large expanse of glass across the front restricted the depth of the steel columns, which put more steel overhead.
The two buildings, with a combined footprint of almost 35,000 sf, were built largely simultaneously. The plan was to build the smaller structure, move Buick/GMC operations into it, and continue to sell Honda out of the old building while the new Honda dealership was under construction.
Lindsey realized she could gain efficiency by overlapping the construction schedules. “If one job was waiting for something, we could jump over and work on the other building,” she said. The Buick/GMC building was started first, and took 12 weeks to build. The Honda building began soon afterwards, and took 16 weeks.
Despite the fact that each building had a different architect, “with Rush Construction, I was under one contract for both buildings,” explains Lindsey.
She was onsite every day there was activity with the metal building systems.
Being able to alternate work between the two buildings gave Lindsey flexibility to pick up the slack during delays, and to handle the formidable task of coordinating the various construction entities on the job.
“There was a lot of coordination with other trades,” recalls Lindsey. “For example, we had to work closely with the mechanical contractor because of where his curbs would be located, and the bracing for the curbs. The Honda building has 11 different RTU’s (roof top units), and the Buick building has nine. We had a number of meetings on site with him to make sure that when he ran his ductwork, the bracing for the units was exactly where it needed to be.”
The two buildings were architecturally distinct projects, both benefitting from Star Building’s compatibility with a wide range of architectural styles. Norris was able to upgrade their business for a much more modern look to match their improved operational abilities. The Honda dealership features the Honda Generation III design, and the Buick/GMC dealership sports Buick’s latest design image package.
The rears of the buildings, where the service areas are located, feature PBR panel walls. The roof is a Double-Lock standing seam roofing system.
“One of the reasons I was awarded the project,” states Lindsey, “is that I was able to offer the owner the twenty-year, single source, no dollar limit weather tightness warranty. The roof system, the HVAC curbs, it was all single source; they all came through NCI, parent company of Star Buildings. They warranty the roof system to be weather tight.
“Our old metal building lasted us almost 50 years,” reflects Josh Norris. “But now we have much more modern high ceilings. In the old one, we had a trailer enclosed in the building as our office. The new Buick store has an air-conditioned second floor for IT, records, and office space. Honda has a second floor for parts storage.”
Norris has also noticed the increased energy efficiency of his new dealerships. “I’ve been very impressed with our utility bills, they’ve gone down significantly. We have a 50,000-sf store across town. The new stores’ utility bills typically run about half of the one across town.”
The new dealerships have made a difference to the community as a whole. “There were articles in the local paper about how good the projects were for the community,” recalls Lindsey. “It’s put new life into the city of Titusville.”
“In Titusville, we’re slow to spend money if you don’t have to. But right now, we are definitely enjoying the benefits of our area. It’s growing. Now was the time to make this change,” concurs Josh Norris about the effect of the project. “The community has definitely shown appreciation for our development downtown. One of the first customers we had was the mayor, who was appreciative of our helping develop the downtown area.”
Ron Norris Honda:
Erector: Pre-Engineered Steel, Inc
Architect: Craig Suman
Structural Engineer: CEG Structural, Tom Adams
Ron Norris Buick-GMC:
Erector: Pre-Engineered Steel, Inc
Architect: Michael A. Penny
Structural Engineer: CEG Structural, Tom Adams
Related Stories
Sponsored | Energy Efficiency | Jul 27, 2016
Metal Roofs Have Solar Advantage
A large roof can become a resource that saves significant money on energy consumption and helps reduce emissions of CO2 and it turns out metal roofs make excellent hosts for solar panels.
Metals | Jun 9, 2016
12 projects win 2016 North American Copper in Architecture Award
The award recognizes new and existing building projects in the United States and Canada for their outstanding use of architectural copper and copper alloys.
Sponsored | Metals | May 13, 2016
Coil-coated metals create awe-inspiring projects
Pre-painted metals can be printed, embossed, or striped for special visual effects.
Sponsored | Metals | Apr 11, 2016
MBMA works with Underwriter’s Laboratory to fire test metal buildings
The fire safety of metal building systems is crucial. The ability of a metal building to prevent or slow down the spread of fire protects the structure and saves occupants' lives.
Sponsored | Metals | Feb 2, 2016
What is the Dollar Value of Speed?
Speed has a real impact on the bottom line, in ways that are obvious and in some that you might not be aware of.
Codes and Standards | Jan 22, 2016
Metal Roofing Seaming Guide published by Metal Construction Association
The free document is specifically tailored for metal roof installation.
Metals | Jan 19, 2016
6 ways to use metal screens and mesh for best effect
From airy façades to wire mesh ceilings to screening walls, these projects show off the design possibilities with metal.
Sponsored | Metals | Jan 13, 2016
Audubon National Wildlife Refuge & Visitors Center gets a LEED worthy renovation
After many years of use, the Audubon National Wildlife Refuge Headquarters and Vistiors Center had developed some serious health and safety problems and needed to be replaced.
Sponsored | Metals | Dec 23, 2015
Taking the LEED in Construction
LEED is a rating system that allows a building to score points for doing things more sustainably, in a variety of ways. There are different kinds of LEED points that relate to materials, energy consumption, jobsite sustainability, and more.