The Metal Construction Association (MCA) published a Best Practices Guide for Roof Seaming.
The document provides an overview of the different types of seaming for metal roofing, a glossary of terms, training guidelines, safety recommendations, pre- and post-seaming procedures, seaming operations, maintenance advice, and guides to sealants, clips, fasteners, and more.
“Proper seaming is critical to the long term performance of metal roofing and we saw a need to provide a general guide for installers that goes beyond what is provided by manufacturers,” says Scott Kriner, MCA’s Technical Director. This best practices guide is designed to familiarize personnel with the general knowledge, basic operation, safety, and maintenance procedures followed by standard troubleshooting suggestions for standard roof seaming processes. It is a general guide to be used in conjunction with the material installation guide and the project's erection drawings.
The guide is available on its website at no cost. It can be found here.
Related Stories
Codes and Standards | Oct 12, 2017
New AIA contract document designates responsibilities for sustainable projects
Roles of architects, contractors outlined in E204–2017.
Codes and Standards | Oct 11, 2017
Data, transparency are keys to next steps in green building, says USGBC chief
Monitoring and comparing performance are critical to advancing sustainability goals.
Codes and Standards | Oct 10, 2017
New guidelines for quality control on application of membrane roof systems released
NRCA document provides guidance for on-site evaluation.
Codes and Standards | Oct 9, 2017
New app calculates maximum allowable heights for building occupancy types, classes of construction
The app streamlines compliance on various types of construction.
Codes and Standards | Oct 5, 2017
California lawmakers pass bill that requires GCs to pay wages of sub employees if subs fail to pay
The measure will go into effect in January if the governor signs it.
Codes and Standards | Oct 4, 2017
Ambitious but realistic increase in clean energy would cut GHG emissions by 80% in the U.S.
NRDC report says goal can be achieved with existing tools.
Codes and Standards | Oct 3, 2017
Reducing duct leakage is focus on latest green building standards updates
ASHRAE 189.1 broadens testing requirements to include more types of ducts.
Codes and Standards | Oct 2, 2017
Nationwide retrofit strategy in Canada could cut 51% of emissions from large buildings
The roadmap provides government and industry with a targeted plan.
Codes and Standards | Sep 28, 2017
Resources available for new OSHA respirable crystalline silica regulation
NRCA offers compliance tools for contractors.
Codes and Standards | Sep 28, 2017
New tool compares HVAC system efficiency
IAPMO and Hydronics Industry Alliance unveil BEST to evaluate systems in early design phase.
