flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Michel Bruneau wins 2012 AISC T.R. Higgins Award

Michel Bruneau wins 2012 AISC T.R. Higgins Award


By By BD+C Staff | October 18, 2011
Michel Bruneau is being honored for his papers on steel plate shear wall design published in AISC's Engineering Journaland the p

Michel Bruneau, Ph.D., P.E., professor of civil, structural, and environmental engineering (CSEE) at the University of Buffalo, N.Y., is the 2012 recipient of the prestigious AISC T.R. Higgins Lectureship Award. Bruneau is being honored for his papers on steel plate shear wall design published in AISC's Engineering Journaland the proceedings of the Canadian Conference on Earthquake Engineering.

The AISC T.R. Higgins Lectureship Award is presented annually by the American Institute of Steel Construction (AISC) and recognizes an outstanding lecturer and author whose technical paper(s) are considered an outstanding contribution to the engineering literature on fabricated structural steel. The award, which includes a $15,000 prize, will be presented at the 2012 NASCC: The Steel Conference (www.aisc.org/nascc) at the Gaylord Texan Convention Center in Dallas, April 18-21.

"The Higgins jury quickly identified Michel as a top candidate, and the subsequent discussions and deliberations served to further elevate him," said Charlie Carter, AISC vice president and chief structural engineer. "The jury noted in particular the impressive extent and breadth of Michel's contributions as a researcher and engineer."

Each year the AISC Education Foundation invites a distinguished panel of industry experts to judge the nominations. The jury reflects a blend of professional insight, industry experience and academic excellence. The following jurors collaborated to select Bruneau as the recipient of this year's award:

  • Jerome F. Hajjar, Ph.D., P.E., professor and chair, Northeastern University, Boston
  • Mark V. Holland, P.E., chief engineer, Paxton & Vierling Steel Company, Omaha, Neb.
  • Lawrence F. Kruth, P.E., vice president of engineering, technology & safety, Douglas Steel Fabricating Corporation, Lansing, Mich.
  • Patrick McManus, Ph.D., P.E., S.E., structural technical director, Martin/Martin, Inc., Lakewood, Colo.
  • Ralph M. Richard, Ph.D., P.E., professor emeritus, University of Arizona, Tucson
  • Rafael Sabelli, S.E., director of seismic design, Walter P Moore, San Francisco

Bruneau's abundant research includes the evaluation and retrofit of existing steel bridges and buildings subjected to large destructive forces up to collapse, as well as the development of new design concepts capable of providing satisfactory seismic-resistance, blast-resistance, or both simultaneously as multi-hazard resistant concepts. This research has encompassed contributions to the development and large-scale experimental validation of various energy-dissipating design concepts to enhance the resilience of structures against extreme events: ductile steel plate shear walls, ductile bridge diaphragms, tubular eccentrically braced frames, structural fuses and controlled-rocking piers.

He has conducted numerous exploration visits to disaster stricken areas and is a member of several professional and technical code-writing committees. He also served as Director (2003-2008) and Deputy Director (1998-2003) of the Multidisciplinary Center for Earthquake Engineering Research, a National Center of Excellence funded by the National Science Foundation, the Federal Highway Administration and others. His past service to the profession includes participation in expert peer review panels, project advisory committees, special project design teams, conference advisory committees and journal editorial boards. Prior to his appointment in academia, he practiced as a consultant for architecture and engineering firms Morrison Hershfield Limited (Toronto), and Buckland and Taylor (Vancouver).

Bruneau has authored or co-authored numerous publications, including more than 100 referred journal papers, 200 papers in conference proceedings and two fiction books. He has received several awards for his technical work, as well as for his latest novel.

The AISC T.R. Higgins Award is named for Theodore R. Higgins, Ph.D., former AISC director of engineering and research, who was widely acclaimed for his many contributions to the advancement of engineering technology related to fabricated structural steel. The award honors Higgins for his innovative engineering, timely technical papers and distinguished lectures. For more information on this prestigious award, please visit www.aisc.org/TRHigginsAward.

Recent T.R. Higgins recipients include: Charles W. Roeder (2011) for his paper on Gusset Plate Connections for Seismic Design; James O. Malley (2010) for his paper on the 2005 AISC Seismic Provisions for Structural Steel Buildings, published in the First Quarter 2007 AISC Engineering Journal; Donald W. White (2009) for his papers on stability analysis and design and the flexural provisions of the 2005 AISC Specification for Structural Steel Buildings; and Walterio Lopez and Rafael Sabelli (2008) for their paper on the seismic design of buckling-restrained braced frames. BD+C

Related Stories

Construction Costs | Oct 16, 2024

Construction Crane Index: Most major markets’ crane counts increase or hold steady in third quarter

Rider Levett Bucknall’s (RLB’s) latest Crane Index and Quarterly Cost Report shows continued decreasing cost inflation and crane counts increasing or holding steady in 10 of the 14 major markets it surveyed. The national average increase in construction costs was 1.07%, the lowest it’s been in the last three years.

AEC Tech | Oct 16, 2024

How AI can augment the design visualization process

Blog author Tim Beecken, AIA, uses the design of an airport as a case-study for AI’s potential in design visualizations.

University Buildings | Oct 15, 2024

Recreation and wellness are bedfellows in new campus student centers

Student demands for amenities and services that address their emotional and mental wellbeing are impacting new development on college campuses that has led to recreation centers with wellness portfolios.

Higher Education | Oct 14, 2024

Higher education design for the first-gen college student

In this Design Collaborative blog, Yogen Solanki, Assoc. AIA, shares how architecture and design can help higher education institutions address some of the challenges faced by first-generation students.

Performing Arts Centers | Oct 10, 2024

Studio Gang's performing arts center for Hudson Valley Shakespeare breaks ground

A new permanent home for Hudson Valley Shakespeare, a professional non-profit theater company, recently broke ground in Garrison, N.Y. The Samuel H. Scripps Theater Center includes a 14,850 sf performance venue that will serve as a permanent home for the theater company known for its sweeping open-air productions of classics and new works.

Sustainable Design and Construction | Oct 10, 2024

Northglenn, a Denver suburb, opens a net zero, all-electric city hall with a mass timber structure

Northglenn, Colo., a Denver suburb, has opened the new Northglenn City Hall—a net zero, fully electric building with a mass timber structure. The 32,600-sf, $33.7 million building houses 60 city staffers. Designed by Anderson Mason Dale Architects, Northglenn City Hall is set to become the first municipal building in Colorado, and one of the first in the country, to achieve the Core certification: a green building rating system overseen by the International Living Future Institute.

3D Printing | Oct 9, 2024

3D-printed construction milestones take shape in Tennessee and Texas

Two notable 3D-printed projects mark milestones in the new construction technique of “printing” structures with specialized concrete. In Athens, Tennessee, Walmart hired Alquist 3D to build a 20-foot-high store expansion, one of the largest freestanding 3D-printed commercial concrete structures in the U.S. In Marfa, Texas, the world’s first 3D-printed hotel is under construction at an existing hotel and campground site.

University Buildings | Oct 9, 2024

Des Moines University Medicine and Health Sciences opens a new 88-acre campus

Des Moines University Medicine and Health Sciences has opened a new campus spanning 88 acres, over three times larger than its previous location. Designed by RDG Planning & Design and built by Turner Construction, the $260 million campus features technology-rich, flexible educational spaces that promote innovative teaching methods, expand research activity, and enhance clinical services. The campus includes four buildings connected with elevated pathways and totaling 382,000 sf. 

Student Housing | Oct 9, 2024

University of Maryland begins work on $148 million graduate student housing development

The University of Maryland, in partnership with Campus Apartments and Mosaic Development Partners, has broken ground on a $148.75 million graduate student housing project on the university’s flagship College Park campus. The project will add 741 beds in 465 fully furnished apartments.

Healthcare Facilities | Oct 9, 2024

How healthcare operations inform design

Amanda Fisher, Communications Specialist, shares how BWBR's personalized approach and specialized experience can make a meaningful impact to healthcare facilities.

boombox1
boombox2
native1

More In Category


Urban Planning

Bridging the gap: How early architect involvement can revolutionize a city’s capital improvement plans

Capital Improvement Plans (CIPs) typically span three to five years and outline future city projects and their costs. While they set the stage, the design and construction of these projects often extend beyond the CIP window, leading to a disconnect between the initial budget and evolving project scope. This can result in financial shortfalls, forcing cities to cut back on critical project features.



Libraries

Reasons to reinvent the Midcentury academic library

DLR Group's Interior Design Leader Gretchen Holy, Assoc. IIDA, shares the idea that a designer's responsibility to embrace a library’s history, respect its past, and create an environment that will serve student populations for the next 100 years.

halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021