The National Fire Protection Association (NFPA) has released a new energy storage systems (ESS) safety fact sheet.
The release comes as the Biden Administration prepares a “Clean Energy Revolution,” including a proposed investment of $400 billion over 10 years in clean energy initiatives. “With more and more countries, states, and communities putting forth zero emissions deadlines, tax breaks and other changes, NFPA developed the at-a-glance Energy Storage Systems Safety Fact Sheet,” according to an association news release.
The resource outlines key points identified in NFPA ESS training, NFPA 855, Standard for the Installation of Energy Storage Systems, and multiple related materials. The document contains information regarding:
· The advantages of supplemental service, peak-shaving, load-leveling, and uninterruptible power supply
· Hazards such as thermal runaway, stranded energy, toxic and flammable gases, deep-seated fires, mechanical/thermal/electrical abuse and environmental impacts
· Designer/contractor considerations for safety – explosion protection/prevention, fire protection systems, battery management systems, and ESS spacing
· Permitting checklist for authorities having jurisdiction (AHJs)
· Pre-incident planning and emergency operations planning highlights
Related Stories
| May 9, 2013
New developments would face tougher stormwater rules than redeveloped sites under EPA proposal
New developments would have to meet more stringent stormwater-retention standards than redeveloped sites under a forthcoming Environmental Protection Agency proposal.
| May 9, 2013
Proposed ASHRAE systems manual uniform procedure guideline open for public review
A proposed guideline that will establish a uniform procedure for transmitting design, construction, testing, and operational information to building owners and operators is open for public comment.
| May 9, 2013
Post-tornado Greensburg, Kan., leads world in LEED-certified buildings per capita
Six years after a tornado virtually wiped out the town, Greensburg, Kan., is the world's leading community in LEED-certified buildings per capita.
| May 9, 2013
SMACNA’s new HVAC sound and vibration guide open for public review
Sheet Metal and Air Conditioning Contractors National Association’s (SMACNA’s) new “HVAC Systems Sound and Vibration Guide” is available for a 45-day public review.
| May 9, 2013
NSF Sustainability launches VOC emissions testing, certification for commercial furniture industry
New program offers sustainable certification and indoor air quality testing for commercial furniture makers.
| May 1, 2013
House bill would give OSHA more authority over state workplace-safety plans
A recently introduced U.S. House of Representatives bill would give the Occupational Safety and Health Administration (OSHA) more authority over state workplace-safety plans and toughen penalties for companies that knowingly violate OSHA regulations.
| May 1, 2013
New commercial landlord disclosures go into effect in California in July
Two new landlord disclosure requirements become effective in California on July 1, 2013.
| May 1, 2013
New ASHRAE residential indoor air quality standard adds carbon monoxide alarm requirement
The new 2013 version of ASHRAE’s residential indoor air quality standard adds a requirement for carbon monoxide alarms.
| May 1, 2013
AAMA publishes standard for multipoint locking hardware for side-hinged doors
The American Architectural Manufacturers Association (AAMA) recently published the first North America standard for multipoint locking hardware for side-hinged door systems.
| Apr 24, 2013
‘W visa’ program could hamper construction industry's growth
The Senate’s bipartisan immigration reform proposal will provide interim legal status to some 11 million undocumented people.
