flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Navy to begin BIM phased implementation in October

Navy to begin BIM phased implementation in October

Design, construction firms bidding on NAVFAC projects must know new requirements


By BD+C Staff | September 29, 2014
The agency intends to use BIM as a life cycle tool where the models are maintain
Top Level Facility Life Cycle Process MapThe agency intends to use BIM as a life cycle tool where the models are maintained and

The U.S. Naval Facilities Engineering Command (NAVFAC) will begin its Building Information Management and Modeling (BIM) Phased Implementation Plan in October.

As a result, design and construction companies interested in working for this federal owner must have a firm grasp of BIM technologies and the forthcoming NAVFAC BIM requirements.

The agency intends to use BIM as a life cycle tool where the models are maintained and updated during the life of the building. However, examples of true life-cycle BIM do not exist to date whereby 3D parametric models are maintained and updated for life-cycle management, NAVFAC says.

The new requirements apply to all projects (Design Build (DB) & A/E Design Bid Build (DBB)) of new construction greater than or equal to $750,000 and major renovations greater than or equal to 50% of the Plant Replacement Value and greater than or equal to $2.5 million.

(http://www.wbdg.org/bim/navfac_bim.php

http://www.wbdg.org/ccb/NAVFAC/ECB/ecb_2014_01.pdf)

Related Stories

| May 25, 2012

Study: Safety inspections don’t hurt the bottom line

A new study suggests that random safety inspections by regulators help reduce injury claims without hurting profits.

| May 24, 2012

2012 Reconstruction Awards Entry Form

Download a PDF of the Entry Form at the bottom of this page.

| May 17, 2012

New standard for Structural Insulated Panels under development

ASTM International and NTA, Inc. are developing a new standard for Structural Insulated Panels (SIPs) that would create a path for U.S. manufacturers to meet the requirements of the Canadian building code.

| May 17, 2012

Webinar: ‘What Energy Codes and Standards Are Adopted Where and by Whom’

A June 12 webinar by the Construction Specifications Institute will outline what energy codes and standards have been adopted in each of the states for commercial buildings, and what is anticipated to be adopted in the future.

| May 17, 2012

California Governor orders new green standards on state buildings

California Gov. Jerry Brown issued an executive order recently that calls for all new or renovated state buildings of more than 10,000 sf to achieve LEED Silver or higher and incorporate clean, onsite power generation.

| May 17, 2012

New Zealand stadium roof collapse blamed on snow, construction defects

Heavy snowfall, construction defects, and design problems contributed to the collapse of the Stadium Southland roof in New Zealand in September 2010, a report has found.

| May 17, 2012

OSHA launches fall prevention campaign

The Occupational Safety and Health Administration (OSHA) recently launched an educational campaign to prevent deadly falls in the construction industry.

| May 15, 2012

Suffolk selected for Rosenwald Elementary modernization project

The 314-student station elementary school will undergo extensive modernization.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021