Using resilient construction techniques in regions prone to extreme weather events is worth the expense, according to a new study from researchers at the Massachusetts Institute of Technology.
The study, “A BreakEven Hazard Mitigation Metric,” says initial investment in mitigation is the key to a sound structure. An initial hazard mitigation investment of $340,000 on a $10 million building would pay for itself over the lifetime of the structure by mitigating storm damage, the study says.
“Too much emphasis is placed on minimizing initial building costs and not enough attention is paid to the high costs of rebuilding after a storm,” said Jeremy Gregory, executive director of the Concrete Sustainability Hub at the Massachusetts Institute of Technology at a roundtable event in Florida. “We need elected officials to take a more long-term and sustainable view by supporting resilient building efforts.”
State lawmakers, officials, and members of the building and code communities discussed the issue at the recently held roundtable in the wake of Hurricane Matthew. The storm caused an estimated $606 million in damages.
Related Stories
Codes and Standards | May 9, 2018
OSHA and state safety agencies write more than 100 silica citations in 6 months
Actions tending to come with investigation of other site conditions.
Codes and Standards | May 8, 2018
Powerhouse coalition builds energy positive buildings
The goal: build buildings that provide more power than they cost to build, run, and demolish.
Codes and Standards | May 7, 2018
Plan advances in Los Angeles for Climate Emergency Mobilization Department
Would oversee efforts to reduce greenhouse gas emissions across the city.
Codes and Standards | May 3, 2018
Data collection, machine learning boost building efficiency
Sensors, software algorithms squeeze out waste.
Codes and Standards | May 2, 2018
Energy Department releases Updated EnergyPlus and OpenStudio building energy modeling tools
The tools can now accept input in epJSON format.
Codes and Standards | May 1, 2018
ASHRAE publishes new energy simulation-aided design standard
Requires building energy modeling during schematic design.
Codes and Standards | Apr 30, 2018
CALGreen projects pre-approved for streamlined LEED v4 requirements
Reduces need to run additional energy models.
Codes and Standards | Apr 26, 2018
New standard supports community resilience
ASTM International guidance supports cost-effective ways to withstand and recover from disasters.
Codes and Standards | Apr 25, 2018
Lessons learned from decades of Superfund cleanups guide contaminated land reuse
Sites repurposed for residential, commercial use, and solar energy generation.
Codes and Standards | Apr 24, 2018
Vibrant downtown core the key for urban multifamily development
Nighttime activity makes the difference.
