flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

Codes and Standards

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

The specification is used to verify air infiltration resistance performance and water penetration resistance.


By Peter Fabris, Contributing Editor | May 10, 2024
Image by wal_172619 from Pixabay
Image by wal_172619 from Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) updated a specification establishing requirements for field testing newly installed storefronts, curtain walls, and sloped glazing systems.

AAMA 503-24, Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems establishes the requirements for field test specimens, apparatus, sampling, test procedures and test reports to be used in verifying the air infiltration resistance performance and/or water penetration resistance performance of newly installed fenestration products.

The Testing Criteria of Commercial Fenestration Updates Task Group completed a full technical review of the specification for the new edition. A new section about significance and use was added. Sections addressing sampling, site preparation, and responsible parties were expanded. The section on test procedures was also revised, clarifying that air leakage resistance testing under AAMA 503 is optional. Definitions of water penetration were also updated.

“When used as part of a comprehensive building commissioning program, AAMA 503 provides reasonable assurance that the installed fenestration products will perform to the specified or rated air leakage and/or water penetration performance levels with allowances given for field performance,” says Jason Seals, FGIA certification services manager, fenestration.

Related Stories

Codes and Standards | Sep 25, 2017

How-to guide to renovating shopping centers available

E.U. research project focuses on energy efficiency and occupant comfort.

Codes and Standards | Sep 21, 2017

After construction crane collapses during Irma, regulations questioned

Cranes rated for 140 mph winds didn’t hold up to 100 mph gusts.

Codes and Standards | Sep 20, 2017

Energy efficiency measures pay off in some not-so-obvious ways

Access to better financing, tax incentives, rent premiums, among the benefits to greener buildings.

Codes and Standards | Sep 19, 2017

Benchmarking regulations prompt jump in green certified properties

2016 saw a slight rise in total certified U.S. green office space.

Codes and Standards | Sep 18, 2017

Changes likely to come to federal wetlands regulations

However, states may step up regulations as feds relax them.

Codes and Standards | Sep 14, 2017

Gentrification means a new mindset for city planners

Rising rents elicit reexamination of zoning principles.

Codes and Standards | Sep 13, 2017

OSHA issues extension for compliance with crane operator certification requirements

Comments on proposed rule sought through Sept. 29.

Codes and Standards | Sep 12, 2017

Washington, D.C. is first LEED Platinum city in the world

All city government buildings are powered by renewables.

Codes and Standards | Sep 11, 2017

Natural solutions would be most effective flood resilience policies for Houston

New green infrastructure should be part of rebuild.

Codes and Standards | Sep 8, 2017

Los Angeles luxury high-rise is first U.S. apartment building to achieve WELL Multifamily certification

Hollywood Proper Residences have verified indoor air and water quality features.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021