flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

Codes and Standards

Specification for field testing newly installed storefronts, curtain walls, sloped glazing systems updated

The specification is used to verify air infiltration resistance performance and water penetration resistance.


By Peter Fabris, Contributing Editor | May 10, 2024
Image by wal_172619 from Pixabay
Image by wal_172619 from Pixabay

The Fenestration and Glazing Industry Alliance (FGIA) updated a specification establishing requirements for field testing newly installed storefronts, curtain walls, and sloped glazing systems.

AAMA 503-24, Voluntary Specification for Field Testing of Newly Installed Storefronts, Curtain Walls and Sloped Glazing Systems establishes the requirements for field test specimens, apparatus, sampling, test procedures and test reports to be used in verifying the air infiltration resistance performance and/or water penetration resistance performance of newly installed fenestration products.

The Testing Criteria of Commercial Fenestration Updates Task Group completed a full technical review of the specification for the new edition. A new section about significance and use was added. Sections addressing sampling, site preparation, and responsible parties were expanded. The section on test procedures was also revised, clarifying that air leakage resistance testing under AAMA 503 is optional. Definitions of water penetration were also updated.

“When used as part of a comprehensive building commissioning program, AAMA 503 provides reasonable assurance that the installed fenestration products will perform to the specified or rated air leakage and/or water penetration performance levels with allowances given for field performance,” says Jason Seals, FGIA certification services manager, fenestration.

Related Stories

Codes and Standards | Oct 27, 2021

Texas reforms series of contractor laws

Measures seen as making it easier to do business in the state.

Codes and Standards | Oct 26, 2021

Drownings during Hurricane Ida point out FEMA flood map flaws

Eleven people drowned in New York City in areas marked as low risk.

Codes and Standards | Oct 20, 2021

New York City passes overhaul of construction codes

Over 600 major changes along with thousands of smaller updates slated for 2022.

Codes and Standards | Oct 20, 2021

One-quarter of U.S. critical infrastructure at risk of failure due to flooding

Police and fire stations, hospitals, airports, and wastewater treatment facilities face threat.

Codes and Standards | Oct 19, 2021

Pittsburgh enacts first-in-the-nation “Dark Sky Lighting” law

Applies to all city parks, facilities, and streetlights.

Codes and Standards | Oct 15, 2021

New Calif. law mandates use of lead-free plumbing fixtures

Must meet NSF/ANSI/CAN 61-2020 in 2023.

Codes and Standards | Oct 14, 2021

Building industry leaders urge governments to boost emissions reductions targets

Scores of large AEC firms and organizations sign letter to UN’s COP 26 group.

Codes and Standards | Oct 13, 2021

FEMA’s new flood insurance plan will sharply raise insurance costs for seaside properties

Risk Rating 2.0 will have more accurate assessment of flood risk.

Codes and Standards | Oct 12, 2021

Three new laws expected to spur more affordable housing in California

Trio of measures could aid carbon reduction in built environment.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021