flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Standard establishes best practices for rainwater and stormwater harvesting system

Standards

Standard establishes best practices for rainwater and stormwater harvesting system

The market is seeing an increasing number of residential, commercial, and industrial rainwater and stormwater systems being installed.


By Peter Fabris, Contributing Editor | January 31, 2023
Components of a typical rainwater harvesting system. Illustration: DOE

Components of a typical rainwater harvesting system. Illustration: DOE

ASSE/ARCSA/IAPMO/ANSI Series 21000-2022, Professional Qualifications Standard for Rainwater Catchment Systems Personnel, has been designated as an American National Standard by the American National Standards Institute (ANSI).

Now available for purchase, the standard was first published in 2017 by ASSE International and the American Rainwater Catchment Systems Association (ARCSA) to address an increasing number of residential, commercial, and industrial rainwater and stormwater systems being installed. The standards within Series 21000 establish best practices and uniform minimum requirements for qualified designers, installers, and inspectors of viable alternative water systems utilizing captured rainwater or stormwater.

Program guidelines and a series of exams have been created for the certification of rainwater catchment system installers, designers and inspectors. The standard complements ARCSA/ASPE/ANSI 63, Rainwater Catchment Systems, and ARCSA/ASPE/ANSI 78, Stormwater Harvesting System Design for Direct End-Use Applications.

“Today, 42.4% of the U.S. and 50.7% of the lower 48 states are in drought. Properly designed, installed, and inspected rainwater catchment systems can help replace the use of potable water for irrigation and allow for watering landscaped and gardened areas during times of drought,” said Kurt Steenhoek, United Association (UA) international representative and ASSE Series 21000 Working Group chairperson. “These systems can help bring water to areas that have development restrictions, depleted ground or surface water sources, or infrastructure that is unable to deliver suitable water quantities or qualities.”

Related Stories

| Feb 28, 2014

GBI issues guide to help federal agencies meet sustainability mandates

The Green Building Initiative has released “The Guiding Principles Compliance for New Construction,” for federal buildings to help federal agencies meet sustainability mandates in the construction of new buildings.

| Feb 28, 2014

Steel Joist Institute standards open for review

The 2015 draft of the Steel Joist Institute’s “Single Joist Standard Specification for K-, LH-, and DLH-Series and Joist Girders” will be available for public review until May 31, 2014.

| Feb 19, 2014

Net Positive Energy + Water is latest green certification standard

The advancement of sustainable construction has reached a new milestone with the development of Net Positive Energy+Water, a new green building certification standard that aims to improve net zero approaches to energy and water conservation.

| Feb 19, 2014

Obama’s climate resilience panel says PVs, cool roofs should be part of solution

Among the suggestions were rooftop solar energy systems and cool roofs, which could be encouraged by policies from local governments.

| Feb 19, 2014

USGBC introduces new online educational platform

The U.S. Green Building Council has introduced “Education @USGBC” a new educational platform.

| Feb 17, 2014

Channeling weather forecasts to building systems can yield significant energy savings

Using weather forecasts to predict outdoor temperature changes can lead to significant energy savings, exceeding 10%, researchers say.

| Feb 13, 2014

Appraisal Institute issues guidelines on evaluating green property

The Appraisal Institute and the Institute for Market Transformation have issued guidelines for training property appraisers to evaluate green buildings.

| Feb 7, 2014

New LEED Dynamic Plaque system will measure building performance

The U.S. Green Building Council recently unveiled the LEED Dynamic Plaque, which is a new system designed for benchmarking and comparing post-occupancy building performance on a global scale.

| Feb 7, 2014

EPA, Freddie Mac collaborate on energy- and water-efficient apartments

Freddie Mac will gather data on energy and water use from property owners, and encourage lenders to spend on energy-efficient investments for multifamily housing. 

| Feb 7, 2014

ASHRAE releases new refrigerant standards

The 2013 editions of ASHRAE’s major refrigerants-related standards, incorporating 41 new addenda, have been published.

boombox1
boombox2
native1

More In Category


Government Buildings

OSHA’s proposed heat standard published in Federal Register

The Occupational Safety and Health Administration (OSHA) has published a proposed standard addressing heat illness in outdoor and indoor settings in the Federal Register. The proposed rule would require employers to evaluate workplaces and implement controls to mitigate exposure to heat through engineering and administrative controls, training, effective communication, and other measures.



halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021