flexiblefullpage
billboard
interstitial1
catfish1
Currently Reading

Technical brief addresses the impact of construction-generated moisture on commercial roofing systems

Codes and Standards

Technical brief addresses the impact of construction-generated moisture on commercial roofing systems

The free download offers suggestions for remediation actions.


By Peter Fabris, Contributing Editor | March 15, 2024
Photo by Nicholas Ismael Martinez on Unsplash

Photo by Nicholas Ismael Martinez on Unsplash

A new technical brief from SPRI, the trade association representing the manufacturers of single-ply roofing systems and related component materials, addresses construction-generated moisture and its impact on commercial roofing systems.

Construction-generated moisture comes from activities including pouring concrete, burning propane heaters, painting, plastering, and drywall finishing. These activities can contribute to excessive levels of relative humidity inside the structure when proper remediation measures are not taken. Accumulation of condensation within the roofing assembly and within the structure can result when the temperature is at or below the dew point.

To control moisture, designers must identify the sources of moisture and develop a remediation plan during the design process. To reduce the probability of condensation, buildings under construction must be adequately ventilated, particularly during concrete hydration and other high moisture-related construction activities.

SPRI recommendations include avoiding the use of wet materials or materials with excessive moisture, installing vapor retarders in the roof assembly, avoiding penetrating vapor barriers, installing at least two layers of insulation, and always sealing deck-to-wall joints and gaps around roof penetrations.

Related Stories

Codes and Standards | Oct 11, 2017

Data, transparency are keys to next steps in green building, says USGBC chief

Monitoring and comparing performance are critical to advancing sustainability goals.

Codes and Standards | Oct 10, 2017

New guidelines for quality control on application of membrane roof systems released

NRCA document provides guidance for on-site evaluation.

Codes and Standards | Oct 9, 2017

New app calculates maximum allowable heights for building occupancy types, classes of construction

The app streamlines compliance on various types of construction.

Codes and Standards | Oct 5, 2017

California lawmakers pass bill that requires GCs to pay wages of sub employees if subs fail to pay

The measure will go into effect in January if the governor signs it.

Codes and Standards | Oct 4, 2017

Ambitious but realistic increase in clean energy would cut GHG emissions by 80% in the U.S.

NRDC report says goal can be achieved with existing tools.

Codes and Standards | Oct 3, 2017

Reducing duct leakage is focus on latest green building standards updates

ASHRAE 189.1 broadens testing requirements to include more types of ducts.

Codes and Standards | Oct 2, 2017

Nationwide retrofit strategy in Canada could cut 51% of emissions from large buildings

The roadmap provides government and industry with a targeted plan.

Codes and Standards | Sep 28, 2017

Resources available for new OSHA respirable crystalline silica regulation

NRCA offers compliance tools for contractors.

Codes and Standards | Sep 28, 2017

New tool compares HVAC system efficiency

IAPMO and Hydronics Industry Alliance unveil BEST to evaluate systems in early design phase.

Codes and Standards | Sep 26, 2017

Anti-drone technology can ward off unauthorized drone flights

The technology can be used to prevent terrorist attacks and spying.

boombox1
boombox2
native1

More In Category




halfpage1

Most Popular Content

  1. 2021 Giants 400 Report
  2. Top 150 Architecture Firms for 2019
  3. 13 projects that represent the future of affordable housing
  4. Sagrada Familia completion date pushed back due to coronavirus
  5. Top 160 Architecture Firms 2021