Pittsburgh-based corporations PNC Financial Services Group and PPG have played integral roles in the development of sustainable architecture. Given their proximity and history, it’s no surprise that PPG products have figured prominently in many of PNC’s signature buildings, including its boldest yet: The Tower at PNC Plaza.
Designed to be one of the greenest office buildings ever built, the 33-story high-rise looks like a conventional glass-and-steel skyscraper, yet the sleekly polished exterior hides a second glass façade that, along with a rooftop solar chimney, creates a “breathing” building that uses fresh air and solar energy to naturally cool, heat and ventilate itself for much of the year.
Metal Curtain Wall
The metal framing for the double-skin façade for The Tower at PNC Plaza is finished with CORAFLON® SUNSTORM® powder coatings by PPG, which were specified for their sparkling mica appearance, hardness and near-zero VOC emissions. “Reducing energy use and emissions, maximizing natural light and optimizing occupant comfort were among the primary goals for The Tower at PNC Plaza, which earned LEED Platinum certification, the highest designation available from the U.S. Green Building Council,” says Patrick Finegan, Group Regional Manager, PNC Realty Services.
To help achieve these objectives, PNC and Gensler worked with the Permasteelisa Group to construct a 1,200-square-foot mock-up of the 800,000-square-foot structure using insulating glass units with argon-gas-filled warm-edge spacers. Thermally broken aluminum framing—finished with Coraflon Sunstorm Mica Gray powder coatings—connected the IGUs to wooden mullions to create added insulation.
During testing and verification, the curtain wall mock-up exceeded design and performance expectations and the design was specified for the entire building.
Based on FEVE resin technology, Coraflon Sunstorm powder coatings deliver exceptional durability and weatherability in a wide range of colors and glosses, including the sparkling mica finish featured on The Tower at PNC Plaza. Like traditional liquid fluoropolymer coatings, Coraflon Sunstorm FEVE powder coatings and DURANAR® PVDF powder coatings feature equivalent performance that meets or exceeds American Architectural Manufacturers Association (AAMA) 2605 specifications for weathering, corrosion resistance, chemical resistance and other criteria on marquee building projects.
In addition to a sophisticated double-skin façade that maximizes ventilation for heating and cooling and increases access to fresh air and natural light, The Tower at PNC Plaza operates highly-efficient water-based heating (radiant) panels and cooling (chilled beam) systems for supplemental heating and cooling.
Not only do these strategies enable The Tower at PNC Plaza to consume up to 50 percent less energy than benchmark buildings of its size, but the high-rise also bathes more than 90 percent of its workspace in natural light.
To learn more about high-performance Coraflon FEVE and Duranar PVDF coatings and how they can enhance building performance and sustainability, call 1-800-258-6398 or visit www.ppgmetalcoatings.com.
Related Stories
| May 3, 2013
5 common failures in paints and coatings
As experienced designers, contractors, and owners know, most paint and coating problems are correctable, but some are especially stubborn to address. Here is a partial compendium of typical failure modes and methods for addressing the problem.
| Feb 28, 2013
Parex introduces cooler and stronger EIFS basecoats and adhesives
Parex USA, Inc., the parent company of leading building material brands; Parex, Teifs, LaHabra, El Rey, and Merkrete, unveils two new Parex EIFS basecoats & adhesives – 121 Cool Base and 121 Dry HI (High Impact).
| Jan 24, 2013
High-Performance Industrial Coatings Expand Into Architectural Coatings Market
Organizations such as the Master Painters Institute and the Society for Protective Coatings are developing standards specifically designed to drive greater performance in commercial architectural coatings.
| Sep 5, 2012
BehrPro introduces Web Enabled Business model
Free platform offers website development resource for industry professionals.
| Jun 1, 2012
New BD+C University Course on Insulated Metal Panels available
By completing this course, you earn 1.0 HSW/SD AIA Learning Units.
| May 29, 2012
Reconstruction Awards Entry Information
Download a PDF of the Entry Information at the bottom of this page.
| May 24, 2012
2012 Reconstruction Awards Entry Form
Download a PDF of the Entry Form at the bottom of this page.
| Feb 2, 2012
Call for Entries: 2012 Building Team Awards. Deadline March 2, 2012
Winning projects will be featured in the May issue of BD+C.
| Dec 7, 2011
NSF International qualifies first wallcoverings distributor to the New American National Standard for Sustainable Wallcoverings
TRI-KES demonstrates leadership in environmental stewardship as the first distributor to earn qualification.
| Dec 2, 2011
What are you waiting for? BD+C's 2012 40 Under 40 nominations are due Friday, Jan. 20
Nominate a colleague, peer, or even yourself. Applications available here.